Professional Documents
Culture Documents
EURO5 Gateway Opening Module Procedure EN
EURO5 Gateway Opening Module Procedure EN
EURO5 Gateway Opening Module Procedure EN
0
MODULE V8.199.2.0
Created On: 06-JULY-2020
INSTALLATION AND OPERATING PROCEDURE
1. REQUIRED PC CONFIGURATIONS:
NOTE:
1. RENAULT always recommended to use with the recent version of operating system to avoid
the issues in platform services / supports.
2. It is necessary to meet the hardware requirements specific to EURO5 applications, that is to
say at least 2 free USB ports (one for the vehicle interface probe, one for the security token
card).
3. The CAN Gateway Opening and Re-Programming modules does not require as much disk
space. But this study anticipates the needs of the configuration module as well as the
constant increase in data volume.
Confidential C
2. INSTALLATION PROCEDURE:
Confidential C
2.4 License agreement wizard will provide all the copy right information about CAN Gateway
module. Read the agreement carefully and select the option “I accept the agreement”
option if you are agreeing and continue to install the software. And then click in “Next”
button.
2.5 Setup will extract and install the software into your computer.
Confidential C
3. CAN GATEWAY OPENING MODULE - OPERATING PROCEDURE:
3.2 Double click on the “Renault gateway unlocking module” icon in your desktop.
Confidential C
3.4 Click on the “Unlock the gateway” button.
Confidential C
3.6 Once the connection established with ECU, it will prompt you for e-Token
authentication. Enter your e-Token password.
3.7 Again, the module will be processing your request for unlocking gateway.
Confidential C
3.8 After all the above-mentioned operations carried out, you will get “Gateway
opening OK” message and your vehicle’s gateway will be opened for your
operation.
3.9 Leave the ignition remain on condition and exit the application by clicking “Quit
the application button”.
Confidential C
3.10 If something went wrong, you will get “Operation failed. Please try again”
message. If you got this message, check everything from initial step and then try
the same operation again.
3.11 If your vehicle is not equipped with CAN Gateway ECU, it will display the
message as “The vehicle is not equipped with a gateway”. Then you can
proceed with your conventional operations with this vehicle.
Confidential C
› For more Details please refer the following site: https://asos.renault.com/#/presentation
WARNING:
The instructions for use of the Renault electronic repair modules are established according to the
technical specifications in force on the date of preparation of the document. They are subject to
modification in the event of updates to the electronic repair modules provided by the manufacturer.
The representation, reproduction or even partial translation of this document is prohibited without
the prior written consent of Renault S.A.S.
Confidential C