Professional Documents
Culture Documents
TDS - Polymal 820 FR
TDS - Polymal 820 FR
LUXCHEM
Unsaturated Polyester Resins
Technical Information
820FR
DESCRIPTION
Polymal 820FR is filled unsaturated polyester resin as orthophthalic type complies to Class 2 Surface Spread
Of Flame (BS476 : Part7).
APPLICATION
It is used for making a variety of glass fiber reinforced plastic such as water and storage tanks, septic tank,
cooling tower, silo especially for Fire retardant requirement application.
SPECIFICATION
Typical Properties Of Liquid Polymal 820FR :
Appearance : Opaque, white resin Note
Viscosity*1) , mPa.s : 800 ~ 1000 *1)
Brookefield:LVT,#3,60rpm@25 oC
Specific Gravity : 1.30 ~ 1.40 *2) (Mekpo 1.0% , Temp : 250C )
Non Volatile Content(%) : 75 ~ 80
Curing Properties*2) :
Gel Time, min : 15 ~ 25
RECOMMENDED STORAGE
Typical storage life at temperature below 25 0C is 3 months. The resin should be stirred prior to use.
To ensure maximum stability and maintain optimum resin properties, avoid exposure to heat sources such
as direct sunlight and steam pipes. The resin should be stored in closed container below 25 0C and properly
sealed to avoid moisture pick-up and monomer loss. It is strongly recommended to mix thoroughly before
use.
Disclaimer:
The information contained in this data sheet is based on laboratory data and field experience which are
believed to be accurate and reliable to the best of our knowledge. We do not guarantee its applicability to
the user’s process or assume any liability for occurrences arising out of its use. Our recommendations
should not be taken as inducements to infringe any patent or violate any law, safety code or insurance
regulations.”