Professional Documents
Culture Documents
Plate Loa Format
Plate Loa Format
Request No. :
Sample No. :
Date of Report : Report No. :
Information Provided to the Laboratory:
Customer :
Project Name :
Project Client :
Consultant :
Contractor :
Project No. :
Project Location :
Sample/Soil Description :
Source of Sample :
Location :
Sample Identification :
Client Reference :
Laboratory Information :
Date Tested :
Tested By :
Weather condition :
Reaction load Used :
Plate diameter (mm) :
Initial soil dry density (Mg/m³) :
Required Pressure (kN/m²)
:
( Design Load )
Test Result
Applied Pressure (kN/m2) 0 63 126 187 252 315 252 187 126 63 0
Settlement (mm) 0 0.65 1.25 1.78 2.30 2.66 2.53 2.11 1.35 1.01 0.65
Pressure Vs Settlement
350
300
250
Pressure (kN/m2)
200
150
100
50
0
0.00 0.50 1.00 1.50 2.00 2.50 3.00
Settlement (mm)
Parameter Unit Result
Diameter of the Plate Used mm
Settlement at Allowable Bearing Pressure (100 KN/m 2) mm
Maximum Pressure Applied KN/m2 ( Kpa)
Settlement at Maximum Pressure Applied mm
Test Method : BS 1377 Part 9 Clause 4.1: 1990 (Amd. 17229: 2007)
Test method Variation : None
Remarks : Nil
Signed for and on behalf of Wimpey Laboratories LLC.
Delvins Oommen
Material Laboratory Manager
Test results relate only to samples tested.
This report shall not be reproduced in full without the written approval of the laboratory.
WARF-CE-041, Issue No.: 03, Rev No.: 02, Issued Date : 18-10-2022
Issue No. 01