Professional Documents
Culture Documents
Dpa Series
Dpa Series
DPA-SERIES
DPA-300S/DPA-300D/DPA-300T/DPA-300Q
DPA-600S/DPA-600D/DPA-900S/DPA-1200S
SUMMARY
The DPA-Series offers both low impedance and High impedance outputs in one pack-
age Ideal for applications where high power and large quantity of long-line speaker
installation is required. The superior efficiency of a Class-D amplifier means higher
power output and greater compactness than an analog amplifier offers.
OVERVIEW
The DPA Series is a amplifier operate in 4 – 8 Ω/70V/100V modes and are capable
of delivering a total 1200 watts of Power. Respectively housed in 2 RU compact chas-
sis, these Class D amplifiers offer High power in reduced size and weight. The com-
bination Class D topology amplification circuitry combined with SMPS (Switch mode
Power Supplies) creates a high efficiency amplifier offering reduced power consump-
tion and low heat dissipation. The DPA-Series offers both low impedance and High
impedance outputs in one package Ideal for applications where high power and large
quantity of long-line speaker installation is required such as Airports Arena, shopping
malls, transportation stadiums or any large scale facilities.
Inter-M, PA AMPLIFIER
CLASS D
Class D audio amplifier offer greater power efficiency over traditional amplifiers.
Among their advantages is their reduced physical size and lower heat dissipation.
They offer less than 1 % THD, total harmonic distortion with an increased signal to
noise ratio to 90 dB and a widened frequency response from 30 Hz~20 KHz
Class D audio amplifier offers greater than 90 % power efficiency over traditional am-
plifiers. SMPS - Switch mode power supply provides high efficiency and low weigh.
Among their advantages is their reduced physical size and lower heat dissipation. The
DPA series is fully equipped with a protection circuit against short circuit, overload,
power and DC output.
Power Out
Trans. Amp. Put SMPS Amp.
100% 100%
Trans.
% %
50 86
EFFICIENCY EFFICIENCY
High Performance
The DPA-SERIES amplifier offers superior incomparable performance and hi-definition
sound with better S/N and THD than any other class D power amplifier in the market.
Inter-M
Other Brand A Other Brand B
DPA-600S
Rated Output 600 W 600 W 600 W
P = I2R = V2/R
P : Amp Output Power(Watt) V : Amp Output Voltage
R : Speaker Impedance(Ohm : Ω) I : Amp Output Current(Ampere)
900 W 5.5 Ω 11 Ω 85 V
1200 W 4 Ω 8.3 Ω 98 V
The following mathematical formula based on Ohms Law demonstrates the relationship
between speaker impedance, power and voltage.
LED Display
Amplifier status monitoring is easy with a LED display
(Power on, Standby, Signal/-30 dB, -10 dB, Clip, fault, AC, DC).
FEATURE
The DPA-300Q offers 4 channels of High impedance Ideal for applications where high
power and large quantity of long-line speaker installation is required such as Airports
Arena, shopping malls, transportation stadiums or any large scale facilities.
SPECIFICATIONS
❖ Single Channel Acquired certificate : KC, KCC, CE, CSA C-US, FCC, FC, GOST
❖ Dual Channel Acquired certificate : KC, KCC, CE, CSA C-US, FCC, FC, GOST
DPA-300D DPA-600D
Rated Output
(T.H.D 0.1 %, AES17)
300 W×2 600 W×2
Peak Power 350 W/CH 680 W/CH
Output Voltage/Impedance Input 100 V/33.3 Ω, 70 V/16.3 Ω, 49 V/8 Ω 100 V/16.6 Ω, 70 V/8.1 Ω, 69.3 V/8 Ω
Input Sensitivity 1 V/10 kΩ
Rated Output Less than 0.1 %
T.H.D (AES17)
1/3 Power Less than 0.03 %
Signal to Noise(20 kHz LPF) Better than 103 dB
Frequency Response(1 W, ±3dB) 50 Hz~20 kHz
Operating temperature -10 ℃~40 ℃
120 V AC, 60 Hz, 220-240 V AC, 50/60 Hz
Operating Power
DC 24 V
Power consumption (1/8 Power) 130 W 250 W
Weight(SET) 7.1 kg/15.7 lbs 8.1 kg/17.9 lbs
Dimensions(SET) 482(W)×88(H)×397(D) mm/19(W)×3.5(H)×15.6(D) in 482(W)×88(H)×450(D) mm/19(W)×3.5(H)×17.7(D) in
❖ Triple / Quad Channel Acquired certificate : KC, KCC, CE, CSA C-US, FCC, FC, GOST
DPA-300T DPA-300Q
Rated Output
(T.H.D 0.1 %, AES17)
300 W×3 300 W×4
Peak Power 350 W/CH 350 W/CH
Output Voltage/Impedance Input 100 V/33.3 Ω, 70 V/16.3 Ω, 49 V/8 Ω 100 V/33.3 Ω, 70 V/16.3 Ω, 49 V/8 Ω
Input Sensitivity 1 V/10 kΩ
Rated Output Less than 0.1 %
T.H.D (AES17)
1/3 Power Less than 0.03 %
Signal to Noise(20 kHz LPF) Better than 103 dB
Frequency Response(1 W, ±3dB) 50 Hz~20 kHz
Operating temperature -10 ℃~40 ℃
120 V AC, 60Hz, 220-240 V AC, 50/60 Hz
Operating Power
DC 24 V
Power consumption(1/8 Power) 250 W
Weight(SET) 8.2 kg/18.1 lbs 8.4 kg/18.5 lbs
Dimensions(SET) 482(W)×88(H)×450(D) mm/19(W)×3.5(H)×17.7(D) in