Professional Documents
Culture Documents
End Semester 2020 Electronic Devices
End Semester 2020 Electronic Devices
NOTE: Write Registration #, Name, and CNIC number on top of your answer sheet.
Question # 1 (15)
1. For the circuit in Fig 1:
a. Determine VOUT at IZK and at IZM.
b. Calculate the value of R that should be used.
c. Determine the minimum value of RL that can be used.
Fig 1 Fig 2
Question # 2 (15)
1. For the transistor circuit in Fig 2, what is VCE when VIN = 0 V?
2. What minimum value of IB is required to saturate this transistor if β DC is (Last 3 digits of
CNIC)? Neglect VCE(sat).
3. Calculate the maximum value of RB when VIN = (Last digit of CNIC) V.
Question # 3 (15)
For the amplifier in Fig 3:
(a) Determine the dc collector voltage.
(b) Determine the ac collector voltage.
(c) Draw the total collector voltage waveform and the total output voltage waveform.
1/2
Question # 4 (10)
Determine VGS and VDS for the E-MOSFET circuit in Fig 4. Assume this particular MOSFET has
minimum values of ID(on) = (Last 2 digits of CNIC) mA at VGS = (Last 1 digits of CNIC) V and
VGS(th) = 2 V.
Fig 3 Fig 4
2/2