IS 6793
2
1
Is
SUPERSEDED
BY
Locarine.
Pawt
1. INTRODUCTION
‘This instruction sheet (IS) covers operation and
maintenance of AMP MTA Terminating Head S8060-1
for use in AMP Pistol Grip‘ Manuel Hancle Assembly
SeO7e1, or AMP. Pistol Grip Preumatic Handle
‘Assembly 59075-. Read these instruction thoroughly
before using the heads. Refer to the instruct
packaged withthe pistol grip handle assert
Installation and removal
2. DESCRIPTION
“This head is. designed
10 te
MTA (Mass Termination 1
‘contacts on 1564.
pe
The MTA ment
“Technique gee is 2 of ‘onstripped
fecTORs (MTA
wid [WITHOUT
wa tocx_| “Lock,
eos | oT
2 Saran | gents
eareyy_|_eaizaa
eer] — Or
lion | garica | SAtTSt
eas | eerzzs
‘aoeza | 6108
2 reo | emso | snes
eras |__ cers
paoeg | ee
ae | Natures | cariat | eens
sez | cers
Bio) | aoe
2 awe | ease | 57
can | s6
Fie. 2
Nee conductor and
fipro the pistol grip hence
guide and support for the
ree of the head
forces wire into the 1wo slotted
Poet contact. (Note that t provides support
Zontact beams when appiying insenion force:
wire.)
ter (Insertion Rod) — is 2 piston for — and
regulates travel of — the wire inserter.
Feed Side — sutomateaby positions the connector
‘her each termination.
Locating Paw! ~ aligns connector for insertion, and
retains during ternation.
3. SETUP ADJUSTMENTS AND TEST
‘The adjuster (ingetion rod) of the wire inserter is
preset for wire sizes 181hrough 26 AWG. Ifthe wire is
Being inserted too daep or not deep enough inside
the contact, ft may Be necessary to adjust the depth
Of the wire inserter, of, # the pneumatic handle ~
Szsemby a being used, if may be necessary to adjust
siher the sir pressure or the cepth of the wire
Insert.
AL Fer Pal ip Mama! Horde Asserty
1. Determine the wire size, and select
the appropriate connector. (Connectors ore
Color-coded according 1 the wire sizes they
‘secommodate.)
2. Using a small knife, cutoff the wire retainers
{sein veel. This will provide 2 clear view for