Professional Documents
Culture Documents
Mitutoyo Digital Dial Indicator
Mitutoyo Digital Dial Indicator
F-1 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
F
Small Tool Instruments
Digimatic Indicators
Dial Indicators/
Dial Test Indicators
Dial Indicator (Standard One Revolution Type for Error-free Reading,Waterproof Type) F-31
Dial Indicator (Standard One Revolution Type for Error-free Reading,Lightweight Type) F-33
Dial Indicator (Long Stroke Type) F-35
Dial Indicator (Compact Type, Small Diameter) F-37
Dial Indicator (Compact Type, Small Diameter) F-39
Dial Indicator (Compact One Revolution Type for Error-free Reading) F-41
Dial Indicator (Long Stroke Type, large Diameter) F-43
ANSI/AGD Type Metric Dial Indicator F-45
Dial Indicator (Special Dial Indicators) F-47
Back Plunger Type Dial Indicator F-49
Contact Points F-51
Interchangeable Backs F-55
Optional Accessories for Digimatic and Dial Indicators F-56
Introduction for Measurement data recording tools for
F-60
Digimatic Indicators (optional)
Dial Test Indicators
Dial Indicator
Dial Gage Stand F-81
Granite Comparator Stands F-83
Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. F-2
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
(Refer to page X for details.)
SPECIFICATIONS
Metric ISO/JIS type ASME/ANSI/AGD type
Accuracy
Order No. Range Resolution Remarks
Overall* Hysteresis* Repeatability*
543-500 With lug Lifting release
0.001mm 0.003mm 0.002mm 0.002mm
543-500B Flat
12.7mm
543-505 With lug
0.01mm 0.02mm 0.02mm 0.01mm
543-505B Flat
Inch/Metric
Accuracy
Order No. Range Resolution Remarks
Overall* Hysteresis* Repeatability*
543-501 With lug
543-501B Flat
.00005”/0.001mm ±.0001”/0.003mm .0001”/0.002mm .0001”/0.002mm
543-502 With lug
543-502B Flat
Optional Accessories
.5” • Lifting
543-506 With lug
Lifting lever No.21EZA198 (ISO/JIS/DIN Type),
543-506B Flat No.21EZA199 (ASME/ANSI/ AGD Type)
.0005/0.01mm ±.0010”/0.02mm .0010”/0.02mm .005”/0.01mm
543-507 With lug Lifting knob No.21EZA105 (ISO/JIS/DIN Type),
543-507B Flat No.21EZA150 (ASME/ANSI/ AGD Type)
* Quantizing error of ±1 count is excluded. Lifting cable (No. 540774)
• SPC Cable:
Dimensions No.905338 (1m)
No.905409 (2m)
ø10.9 21.6 20
Unit: mm • USB Input Tool Direct (2m) : 06ADV380F
ISO/JIS • Connecting Cables for U-WAVE-T (160mm):
Type No.02AZD790F
For footswitch 02AZE140F
Refer to page F-60 for details.
• Digimatic Mini-Processor DP-1VR: 264-504
• Contact points for Mitutoyo’s dial indicators
50.1
5
(Refer to pages F-51 to F-54 for details.)
Interchangeable backs for 2 series
(Refer to page F-55 for details.)
• Measuring stands (Refer to page F-79 to F-85 for details.)
ø59
ø54
16
F-3 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
(Refer to page X for details.) ABSOLUTE Digimatic Indicator ID-SX
SERIES 543
An inspection certificate is supplied as standard. • Cost-effective oriented design • ABS (absolute) sensor
Refer to page X for details. ID-SX indicators use a button-type battery These Digimatic indicators employ Mitutoyo’s proprietary
(SR44) and come with the minimum of ABS (absolute) sensor, which makes it possible to restore the
functionality for ease of use. There is a choice origin point even if the power is turned off. This eliminates
of models in the lineup allowing selection the need to perform origin restoration each time the
of 0.01 mm, 0.001 mm or inch-based power is turned on. Furthermore, this sensor ensures that
Technical Data measurement resolutions. overspeed errors do not occur, which improves reliability.
Display: 6-digit LCD and sign
Scale type: ABSOLUTE electrostatic linear encoder
• IP53 dust/water protection level • Long battery life
Usable orientation: All The models listed below also provide IP53 dust/ One button battery (SR44) provides
Power supply: SR44, part No. 938882 for initial water protection level specifications: approximately 20,000 hours of continuous
operational checks (standard accessory) 543-794/94B/95/95B/96/96B use for .0005”/0.01mm resolution models.
Maximum response speed: No limit (scan-type measurement
is not supported)
Operating temperature range: 0 to 40ºC
Storage temperature range: -10 to 60ºC
Functions
Origin set (zero-set) : T he display can be zeroed at any
chosen position.
Direction switching : T he measuring direction can be
switched.
in/mm reading (inch/mm models only)
Measurement data output: These indicators have a
measurement data output socket, which makes it
possible to output measurement to the DP-1VR mini
processor or to a PC through an input tool. Furthermore,
the U-WAVE measurement data wireless communication
system can be used to wirelessly input measurement data
to a PC. 543-781 543-790 543-794
Error warning ID-S1012X ID-S112X ID-S112PX
Optional accessories
• Lifting
Lifting lever No.21EZA198 (ISO/JIS/DIN Type),
No.21EZA199 (ASME/ANSI/ AGD Type)
Lifting knob No.21EZA105 (ISO/JIS/DIN Type),
No.21EZA150 (ASME/ANSI/ AGD Type)
SPECIFICATIONS
Lifting cable No. 540774 Metric ISO/JIS/DIN Type ASME/ANSI/AGD Type
3
• SPC Cable: Order No. Range Resolution
Accuracy*1
Back type Measuring Battery life* Dust/Water
No.905338 (1m) Overall*2 Hysteresis Repeatability force (continuous use) protection level*4
No.905409 (2m) 543-790 With lug
• USB Input Tool Direct (2m) : 06ADV380F 1.5N or less IP42
543-790B Flat
• Connecting Cables for U-WAVE-T (160mm): 543-794
0.001 mm 0.003 mm 0.002 mm 0.002 mm 18,000 hours
With lug
No.02AZD790F 543-794B
12.7 mm 2.5N or less IP53
Flat
For footswitch: 02AZE140F 543-781 With lug
Refer to page F-60 for details. 0.01 mm 0.02 mm 0.02 mm 0.01 mm 1.5N or less 20,000 hours IP42
543-781B Flat
• Digimatic Mini-Processor DP-1VR: 264-504
• Contact points for Mitutoyo’s dial indicators Inch/Metric
(Refer to pages F-51 to F-54 for details.) Accuracy*1
Interchangeable backs for 2 series Order No. Range Resolution Back type Measuring
force
Dust/Water
Battery life*3 protection level*4
(Refer to page F-55 for details.) Overall*2 Hysteresis Repeatability
• Measuring stands (Refer to page F-79 to F-85 for details.) 543-791 With lug
543-791B Flat
.00005”/0.001mm
IP53 dust/water protection level 543-792 With lug
1.5N or less IP42
Level 5: Dust protection 543-792B Flat
While complete protection against invasion of 543-793 With lug
.0001”/0.001mm ±.0001”/0.003mm .0001”/0.002mm .0001”/0.002mm 18,000 hours
dust is not provided, protection is adequate 543-793B Flat
to prevent dust amounts that would inhibit 543-795 .5”/12.7 With lug
the prescribed operations and safety of the 543-795B mm Flat
electronic equipment. .00005”/0.001mm 2.5N or less IP53
543-796 With lug
Level 3: Protection against spraying water 543-796B Flat
The product suffers no harmful effects when 543-782 With lug
subjected to water sprayed at an angle of up to 543-782B Flat
60 degrees on both sides. .0005”/0.01mm ±.0010”/0.02mm .0010”/0.02mm .0005”/0.01mm 1.5N or less 20,000 hours IP42
543-783 With lug
For details on the dust/water protection level test 543-783B Flat
conditions, please refer to IEC 60529:2001 and JIS C
*1 These values apply at 20ºC, and do not include ±1 count allowance for quantization error.
0920:2003. *2 Overall magnification and linearity.
IP code is the degree of protection against solid foreign *3 The battery life varies, depending on the number of times the Digimatic indicators are used as well as the way it is used. The values listed above are approximations.
objects and water. *4 This is only valid when the data socket cover is in place. Does not apply if the cover is removed, a lifting accessory is attached, or a connecting cable is attached.
Mitutoyo offers a lineup of coolant proof, ID-N/B
indicators that have excellent resistance to oil, water and
dust and so are suitable for use in environments that
Dimensions
�ø10.9
include splashing cutting fluid. ISO/JIS
19.9 20
Unit: mm
Type
50.1
F
�ø54
�ø59
16
ø6
.5
43.5
46.5
54.4
67.4
0
�ø8 -0.009
14
17
Contact point
M2.5×0.45
21.2
13.3
37.2
7.3
13.3
7.6
7.3
IP-53 model
Note 1: Dimensions of the inch (ANSI/AGD Type) dial indicator partly differ from those of the metric (ISO/JIS Type) indicator.
Refer to the ABS Digimatic Indicator ID-S
Note 2: Inch (ANSI/AGD Type) dial indicators are provided with a stem of 3/8" dia. and #4-48UNF thread mount for the contact point.
Series brochure (E12013) for details.
Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. F-4
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
(Refer to page X for details.)
F-5 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
SPECIFICATIONS
Metric ISO/JIS type ASME/ANSI/AGD type
Setting measuring force on low measur- Order No. (w/ lug, flat-back) Range Resolution Overall accuracy* Measuring force Remarks
ing force models 543-390 543-390B 1.5N or less —
12.7mm
543-394 543-394B 0.003mm 0.4N - 0.7N Low measuring force
0.001mm
• 543-404/404B/405/405B/406/406B — 543-470B 25.4mm 1.8N or less —
Spindle Weight Maximum measuring — 543-490B 50.8mm 0.005mm 2.3N or less —
Spring 543-400 543-400B 0.9N or less —
orientation (approximately 0.1N) force 12.7mm
Yes Yes 0.5N or less 543-404 543-404B 0.02mm 0.2N - 0.5N Low measuring force
0.01mm
— 543-474B 25.4mm 1.8N or less —
Pointing vertically Yes No 0.4N or less
— 543-494B 50.8mm 0.04mm 2.3N or less —
downward No Yes 0.3N or less
No No 0.2N or less * Hysteresis: 0.001mm/0.01mm Resolution Type: 0.002mm * Repeatability: 0.001mm/0.01mm Resolution Type: 0.002mm
Horizontal Yes No 0.3N or less
0.01mm Resolution Type: 0.02mm 0.01mm Resolution Type: 0.02mm
Note) Operation using configurations other than shown above is Inch/Metric
not guaranteed. Order No. (w/ lug, flat-back) Range Resolution Overall accuracy* Measuring force Remarks
543-391 543-391B 1.5N or less —
• 543-394/394B/395/395B/396/396B 543-392 543-392B 1.5N or less —
Spindle Weight Maximum measuring .5”
Spring 543-395 543-395B 0.4N - 0.7N Low measuring force
orientation (approximately 0.1N) force .0005"/ .0001"/ .0001”
543-396 543-396B 0.4N - 0.7N Low measuring force
.00005"/ .001mm /
Yes Yes 0.7N or less — 543-471B 1.8N or less** —
1” 0.01mm
Pointing vertically Yes No 0.6N or less — 543-472B 1.8N or less** —
downward No Yes 0.4N or less — 543-491B 2.3N or less** —
2” .0002”
No No Not guaranteed — 543-492B 2.3N or less** —
Horizontal Not guaranteed 543-401 543-401B 0.9N or less —
Note) Operation using configurations other than shown above is 543-402 543-402B 0.9N or less —
.5”
not guaranteed. 543-405 543-405B 0.2N - 0.5N Low measuring force
.001”
543-406 543-406B 0.2N - 0.5N Low measuring force
.0005”/0.01mm
— 543-475B 1.8N or less** —
1”
— 543-476B 1.8N or less** —
— 543-495B 2.3N or less** —
2” .0015”
— 543-496B 2.3N or less** —
* Hysteresis: .0005”/.0001”/.0005”/0.001mm/0.01mm * Repeatability: .0005”/.0001”/.0005”/0.001mm/0.01mm
Resolution Type: .00010”/0.002mm Resolution Type: .00010”/0.002mm
.0005”/0.01mm Resolution Type: .0010”/0.02mm .0005”/0.01mm Resolution Type: .0005”/0.02mm
* Quantizing error of ±1 count is excluded
** Applies for a spindle orientation between the spindles
DIMENSIONS
ISO/JIS 12.7mm range models 50.8mm range models Unit: mm
Type ø10.9 28.8 20 ø19.2 31.5 11
1.7
50.1
5
32°
ø54
85.2
ø59
ø6
.5
46.5
54.4
0
ø8 -0.009
17
ø59
M2.5X0.45
21.2
13.3
7.3
7.6
25.4mm range models ø19.2 31.5 11
97.3
110.6
57.7
ø8 -0.009
0
19.5
ø59
F
52
M2.5X0.45
70
7.3
84.8
ø8 -0.009
0
19.5
ø4.8
50.8mm range models
M2.5X0.45
40.8
7.3
26
Note 1: Dimensions of the inch (ANSI/AGD Type) dial indicator partly differ from those of the metric (ISO/JIS Type) indicator.
Note 2: Inch (ANSI/AGD Type) dial indicators are25.4mm
provided with
range a stem of 3/8" dia. and #4-48UNF thread mount for the contact point.
models
Note 3: Products with an Order No. suffixed "B" have a plain back, and other models have a center lug back.
Refer to page F-55 for details of the backs.
Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. F-6
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
Digimatic Indicators
Comparison measuring instruments which ensure high quality, high accuracy and reliability. (Refer to page X for details.)
543-575
543-585 Lifting knob
• Lug
No.21EZA145 (ISO/JIS type)
No.21EZA146 (ASME/ANSI/AGD type)
• Arm for ID-B (mode-to-order)
• Rubber boot
For oil resistance (NBR) No.02ACA376 (for ID-N)
No.125317 (for ID-B)
For durability (silicon) No.238774 (for ID-N)
No.21EAA212 (for ID-B)
• SPC cable:
No.21EAA194 (1m)
No.21EAA190 (2m)
LCD readout reversal function • USB Input Tool Direct (2m): No.06ADV380G
• Connecting Cables for U-WAVE-T (160mm)
: No.02AZD790G
For footswitch: No.02AZE140G
Refer to page F-60 for details.
SPECIFICATIONS • Bifurcated connecting cable with zero-setting terminal:
Metric ISO/JIS type ASME/ANSI/AGD type No.21EAA210 (1m)
Order No. Range Resolution Accuracy* Remarks No.21EAA211 (2m)
F 543-570 12.7mm Slim type ID-N Two of the wires inside the cable are separated for zero
0.01mm 0.02mm setting without touching the SET switch on the main body.
543-580 5.0mm Back plunger type ID-B Use these cables in combination with commercially available
543-575 12.7mm Slim type ID-N switches. Zero setting is performed by briefly connecting
0.01mm / 0.001mm 0.01mm / 0.003mm
543-585 5.0mm Back plunger type ID-B these two wires together (less than a second), and ABS
preset & recall by connecting for a second or more.
Inch/Metric
• Contact points for Mitutoyo’s dial indicators
Order No. Range Resolution Accuracy* Remarks (Refer to pages F-51 to F-54 for details.)
543-571 .5” Slim type ID-N
.0005”, 0.01mm .001”
543-581 .2” Back plunger type ID-B
543-576 .5” 0.01mm / 0.001mm Slim type ID-N
.00012”
543-586 .2” .0005” / .00005” Back plunger type ID-B
*Quantizing error of ±1 count is excluded
F-7 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
Usage examples
DIMENSIONS
ID-N Unit: mm
35 25 20 - 22.5
7.6 10 - 13
21.7
SPC cable
5
5
3.2
2-R
6.5
66.2
6.2
49.4
Bifurcated connecting cable with zero-setting terminal ø8 -0.009
0
15.2
88.1
40.6
53.9
7.3
13.3
Contact point
M2.5x0.45 Equipped with an optional lug
ID-B
21.7
44.3 20 - 22.5
35 7.6 10 - 13
4
6.5 25
3.
2-R
66.2
6.2
49.4
F
80.5
ø8 -0.009
0
15.2
40.7
46.3
7.3
Contact point
5.6
M2.5x0.45
Equipped with an optional lug
Refer to the ABS Coolantproof Digimatic Indicator ID-N/ID-B Note 1: Dimensions of the inch (ANSI/AGD Type) dial indicator partly differ from
brochure (E4302-543) for details. those of the metric (ISO/JIS Type) indicator.
Note 2: Inch (ANSI/AGD Type) dial indicators are provided with a stem of 3/8"
dia. and #4-48UNF thread mount for the contact point.
Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. F-8
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
(Refer to page X for details.)
ø54
ø59.4
ø6.
F
5
46.5
54.4
0
ø8-0.009
16.8
7.3
F-9 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
(Refer to page X for details.)
DIMENSIONS
ISO/JIS Unit: mm
Type ø10.9 28.6
ø54
ø59.4
F
46.5
54.4
0
ø8-0.009
16.8
7.3
7.6
Note 1: Dimensions of the inch (ANSI/AGD Type) dial indicator partly differ from those of the metric (ISO/JIS Type) indicator.
Note 2: Inch (ANSI/AGD Type) dial indicators are provided with a stem of 3/8" dia. and #4-48UNF thread mount for the contact point.
Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. F-10
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
(Refer to page X for details.)
F
46.5
54.4
0
ø8-0.009
16.8
7.3
7.6
Note 1: Dimensions of the inch (ANSI/AGD Type) dial indicator partly differ from those of the metric (ISO/JIS Type) indicator.
Note 2: Inch (ANSI/AGD Type) dial indicators are provided with a stem of 3/8" dia. and #4-48UNF thread mount for the contact point.
F-11 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
Fixture examples
Ball diameter Outside diameter Outside radius Countersink diameter
Fixture type*
x = Spindle θ θ θ 2L 2L
displacement r
X
r
X
x
H
r
x
position (retraction
x
x+d
is the positive-going d r 2L
R
D D R
R
direction) D
Calculation (x’ = x + d) D = Ax D = Ax' + B H = Ax' + B D = Ax' R = Ax' R = Ax' + B + C/x' R = A(x') + B + C/(x')
θ
sin −
θ θ θ 2 1 1 1
A −2tan − −2tan − −1 −2tan − − − −− −
2 2 2 θ 2 2 2
1−sin −
2
Coefficient
)( )
(
values 1 θ γ 1 d
2γ -tan − -1 -
B 0 θ 2 θ
cos−
θ 0 0 −r r −r
cos− 2tan −
2 2 2
L2 L2 L2
C 0 0 0 0 0 − −− −
2 2 2
Origin offset
d 0 0 0 0 0 0 0 0
value
ORIGIN-set position
of spindle *
Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. F-12
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
(Refer to page X for details.)
5
Note: Measurement data cannot be output.
Output
ø59.4
circuit
ø54
OUT
F Load
43.5
GND
0 External power
ø8 −0.009
67.4
13.8
Input
circuit
Ball contact (ø3)
37.2
7.3
1.2kΩ IN
7.6
GND
Switch, etc.
Note 1: Dimensions of the inch (ANSI/AGD Type) dial indicator partly differ from those of the metric (ISO/JIS Type) indicator.
Note 2: Inch (ANSI/AGD Type) dial indicators are provided with a stem of 3/8" dia. and #4-48UNF thread mount for the contact point. Input current: Max. 20mA
F-13 20 operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Mitutoyo
20 28.5 Therefore the company reserves the right to change any or all aspects of any product specification without notice.
(Refer to page X for details.)
DIMENSIONS
23 38 Unit: mm
ISO/JIS
Type
126
180.3
F
0
ø8 -0.009
40
ø4.8
41.3
M2.5X0.45
27
7.3
Note 1: Dimensions of the inch (ANSI/AGD Type) dial indicator partly differ from those of the metric (ISO/JIS Type) indicator.
Note 2: Inch (ANSI/AGD Type) dial indicators are provided with a stem of 3/8" dia. and #4-48UNF thread mount for the contact point.
Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. F-14
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
Digimatic Indicators An inspection certificate is supplied as standard.
Refer to page X for details.
Comparison measuring instruments which ensure high quality, high accuracy and reliability.
Functions
Zero set, Preset, GO/±NG judgement
Max/Min value hold, Runout measurement
Resolution switching
Counting direction switching
Data output, Data hold, Function lock
• Measuring maximum value, minimum value and runout (difference between a maximum and a minimum value) inch/mm conversion (inch/mm models)
Alarm: Over speed error, Setting error, Overflow error
Maximum value / minimum value Difference/runout
measurement measurement Optional accessories
• Lifting
Lifting knob : No.21EZA101
Lifting cable : No.540774 (stroke 30 mm)
B
• Lug-on-center back:
点 No.101040 (ISO/JIS type)
No.101306 (ASME/ANSI/AGD type)
• Remote controller : No.21EZA099
A
A点 D点
Example: Indicator traces between points <A> to <D> • SPC Cable:
C
543-561 543-563
F-15 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
SPECIFICATIONS
Metric Inch/Metric ISO/JIS type ASME/ANSI/AGD type
Comparator stand
Order No.* Range Resolution Accuracy** Order No.* Range Resolution Accuracy**
215-505-10
543-561 .00006” /
30.4mm 0.0005mm, 0.0015mm 543-562 1.2” / 30.4mm .00002”,
543-563 60.9mm 0.001mm 0.0025mm .00005”, .0001”, 0.0015mm
* To denote your AC power cable add the following suffixes to 0.0005mm, .0001” /
543-564 2.4” / 60.9mm 0.001mm
the order No.: A for UL/CSA, D for CEE, DC for CCC, E for BS, 0.0025mm
K for KC, No suffix is required for JIS/100V * To denote your AC power cable add the following suffixes to
the order No.: A for UL/CSA, D for CEE, DC for CCC, E for BS,
** Quantizing error of ±1 count is excluded. K for KC, No suffix is required for JIS/100V
DIMENSIONS
Unit: mm
ISO/JIS ø12
Type 31 11
Digimatic
Remote Spindle lifting cable Mini-Processor
90 (60)
controller DP-1VR
60
Spindle lifting
knob
311.3 (251.3)
114
ø8 -0.009
0
30
4.8
77.3 (47.3)
Contact point
61.5 (31)
screw-thread size
M2.5x0.45
7.3
Note: ( ) = 543-561
Note 1: Dimensions of the inch (ANSI/AGD Type) dial indicator partly differ from
those of the metric (ISO/JIS Type) indicator.
Note 2: Inch (ANSI/AGD Type) dial indicators are provided with a stem of 3/8"
dia. and #4-48UNF thread mount for the contact point.
( ): for 30.4mm model
Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. F-16
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
Digimatic Indicators
Comparison measuring instruments which ensure high quality, high accuracy and reliability. (Refer to page X for details.)
85.2
Point B
83.2
Point D
B
83.2
Point A
C
70
84.8
Point C
ø8 -0.009
19.5
0
97.3
ø4.8
F
110.6
M2.5×0.45
40.8
26
7.3
ø8 -0.009
0
19.5
ø4.8
65.3
52
M2.5×0.45
7.3
Note 1: Dimensions of the inch (ANSI/AGD Type) dial indicator partly differ from those of the metric (ISO/JIS Type) indicator.
Note 2: Inch (ANSI/AGD Type) dial indicators are provided with a stem of 3/8" dia. and #4-48UNF thread mount for the contact point.
F-17 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
Supplemental information on Digimatic Indicators
Origin setting of Digimatic Indicators
0.2mm
EC Counter
SERIES 542 — Low-cost, Modular Type Display Unit
44.4 91.4
67
F
6.6
48
96
45 +0.8
48
0
92 +0.8
0
Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. F-18
Therefore the company reserves the right to change any or all aspects of any product specification without notice. パネルカット寸法