Professional Documents
Culture Documents
VS7 6 8 Eu
VS7 6 8 Eu
VS7 6 8 Eu
Metal Seal
SeriesVS7-6
Single solenoid (FG-S) Double solenoid (FG-D) Reverse pressure (YZ-S)∗ Reverse pressure (YZ-D)∗
2 position
VS7-6-FPG-D
Closed centre (FHG-D) Exhaust centre (FJG-D) Double pilot check (FPG-D) Pressure centre (FLG-D)∗
3 position
VS7-6-FHG-D
∗ Option
Standard Specifications
VS7-6-FG-D Fluid Air/lnert gas
VS7-6-FG-S Operating pressure 0.1 to 1.0MPa
o
Ambient and fluid temperature 5 to 60 C
Manual override Non-locking style, Locking style∗
Note: Electrical entry DIN connector
Please note that single subplates and
Lubrication Non-lube
manifolds have changed colour from
If provided, use turbine oil (ISO, VG32)
platinium silver to white as standard.
Shock resistance (Vibration resistance) (1) 150/50 m/s2
Valves will remain platinium silver. Applicable sub-plate VS7-1 (ISO size q)
∗ Option
Note) Shock resistance: No malfunction resulted from the impact test using a drop impact tester. The test was performed on the axis and
right angle directions of the main valve and armature, for both energized and de-energized states. (Value in the initial stage.)
Vibration resistance: No malfunction occurred in a one-sweep test between 8.3 and 2000 Hz. Test was performed at both
energized and de-energized states to the axis and right angle directions of the main valve and armature. (Value in the initial stage.)
Pilot Valve/Spacifications
Part No.∗ AXT511 AB -1 (V) AXT511 AB -2 (V) AXT511 AB -3 (V) AXT511 AB -4 (V)
Rated voltage (V) 100V AC 50/60 Hz 200V AC 50/60 Hz 24V DC 12V DC
Inrush current (A) 0.049/0.043 0.024/0.021
0.075 0.15
Holding current (A) 0.031/0.020 0.015/0.01
Allowable voltage (V) 85 to 110% of rated voltage
o
Insulation Class B (130 C) or equivalent
∗ A: With 2-M4 X 46 bolts for 2 position valve, B: With 2-M4 X 54 bolts for 3 position valve Note) Based on JIS C4003.
(V): Pilot EXH individual style.
Option/Interface regulator
Accessories Interface regulator model
(1)
ARB250
Mounting bolt Applicable solenoid valve VS7-6
TA-B-5 X 35 Regulation port
(with washer) A B P
Packing AXT500-13 Proof pressure 1.5MPa
Indicator Iight (Option) Max. operating pressure 1.0MPa
Set pressure range 0.1 to 0.83 Mpa
o
Optional Specifications Ambient and fluid temperature 5 to 60 C
Pressure gauge port size 18
Surge voltage
Available Weight (kg) 0.55
suppressor
Reverse R1/R2 port: Pressure in P/A 15 16 13
Air supply side eff. area S (P=0.7MPa, P1=0.5MPa) (2) (mm2)
pressure R1=P1 pressure R2=P2 pressure, P1<=P2 P/B 16 16 11
A/EA 25 mm2
Air exhaust side eff. area S (P2=0.5MPa) (2)
B/EB 18 mm2
Note 1) Use "ABR210" for pressure centre style and reverse pressure style.
Note 2) Synthesized effective area with 2 position single style solenoid valve.
Model
Max. operating rate (1) Effective area Response time (2) Weight (3)
No. of positions Model (With 124 sub-plate)
(cycle/sec.) (mm ) (Nl/min) (sec) (kg)
2 (Single) VS7-6-FG-S-쏔-Q 27 (1472.25) 20 0.025 or less 0.460
2 (Double) VS7-6-FG-D-쏔-Q 27 (1472.25) 20 0.015 or less 0.560
3 (Closed centre) VS7-6-FHG-D-쏔-Q 25.5 (1374.10) 10 0.045 or less 0.635
3 (Exhaust centre) VS7-6-FJG-D-쏔-Q 27 (1374.10) 10 0.045 or less 0.635
3 (Pilot check) VS7-6-FPG-D-쏔-Q 20 (1079.65) 10 0.05 or less 0.990
(1) Min. operating frequency is based on JIS B8375. (Once every 30 days) (3) Weight without sub-plate (Sub-plate: 0.37kg)
(2) Based on JIS B8375-1975 (At 0.5MPa) (4) (1) and (2) are the rates in the condition of controlled clean air.
EMC-VS7-6_V7-8-01A-UK
VS7-6
3 Position Double Pilot Check Valve/Operation Pressure Characteristics Cylinder Speed/Stop Position Range
Check Valve The check valve will operate correctly
(Wedge packing style) providing that cylinder side pressure is not
in excess of two times the supply pressure.
VS7-6-FHG-D-쏔R
3 position double pilot check valve
achieves a reduction in air leakage as a
result of main valve construction which
features co-axial wedge packing
(Max. leakage: 10 cm3/min (ANR)).
Caution
쎲Verify that there is no leakage from the
pipes between valve and cylinder, and
from fittings. Check for leaks by using
neutral detergent solution before use. Also
check the cylinder packing and the piston
packing. If there is leakage, cylinder may
not stop at the mid-stroke position, and
could move immediately after the valve is
de-energized.
쎲Be aware that if the exhaust side is Cylinder Operation Chart
restricted excessively, the intermediate
stopping accuracy will decrease and will
lead to improper intermediate stops.
1.19-2
VS7-6
How to Order
E VS7 6 FG S 1 Q
Symbol Number of solenoid Rated voltage Option Port size of sub-plate Connector
S Single 1 100V AC — None — Without sub-plate — Connector
FG FJG D Double 2 200V AC N Indicator light A02 Side piping 1 4 ∗ O W/o connector
3 24V DC M Direct manual override A03 Side piping 38
Thread
Z Indicator B02 Bottom piping 1 4 ∗
light with surge
4 12V DC voltage suppressor
YZ∗ FPG 9
Others
MR Wedge packing style with
direct manual override B03 Bottom piping 38
Rc (PT)
(250V or less) F G (PF)
R Wedge packing style ∗ R port: 3
8 N NPT
Order Contact SMC V Individual pilot EXH
FHG FIG∗ Made
for other voltages (9) T NPTF
∗If specifying more than
Protective class one symbol, indicate them
∗ Option
class I (Mark: ) in the alphabetical order.
Ordering source area code
Code Note:
areas
Japan, Asia Manifold exploded view see page 1.19-33
- for details.
Australia
E Europe
N North America
Precautions
Be sure to read before handling. Refer to p.0-33 to 0-36 for Safety Instructions and common
precautions.
Caution
DIN Connector (Wiring) Interface Regulator Specifications
Specifications
Interface regulator model ARB250
Applicable solenoid valve VS7-6
Regulation port A B P
Max. operating pressure 1.0MPa (1)
Setting pressure range 0.1 to 0.83MPa (1)
o
Ambient and fluid temperature 5 to 60 C (3)
Pressure gauge port size 18
Weight (kg) 0.55
Air supply side eff area (mm2) P A 15 16 13
S (P=0.7MPa, P1=0.5MPa) P B 16 16 11
Air exhaust side eff area A EA 25 mm2
S (P2=0.5MPa) B EB 18 mm2
Note 1) Maximum operating pressure of solenoid valve is 0.9 MPa.
Note 2) Be sure to set pressure within setting pressure range of the solenoid valve.
o
Note 3) Solenoid valve: Max. 50 C
Note 4) Synthesized effective area with 2 position single style solenoid valve.
Note 5) •Supply pressure to interface regulator only from P port except when it is used with reverse
pressure style valve.
•Use the ARB210 or ARB310 model to combine a pressure centre valve and the A and B port
pressure reduction of a spacer style regulator.
•Use the ARB210 or ARB310 model to combine a reverse pressure valve and a spacer style
regulator. The P port pressure reduction cannot be used.
•To use a perfect valve and a spacer style regulator, use a manifold or a sub plate as the standard
and stack in the following order: the perfect spacer, spacer style regulator, and the valve.
•When a closed centre valve is combined with the A and B port pressure reduction of a spacer style
regulator, it cannot be used for intermediate stops of the cylinder because of the leakage from the
relief port of the regulator.
1.19-3
VS7-6
Construction
VS7-6-FG-S-쏔쏔-Q VS7-6-FG-D-쏔쏔-Q
VS7-6-FHG-쏔쏔-Q VS7-6-FPG-쏔쏔-Q
VS7-6-FJG-쏔쏔-Q
VS7-6-FHG-D-쏔R-Q
Replacement Parts
Part No.
No. Description Material
VS7-6-FG-S VS7-6-FG-D VS7-6-FHG VS7-6-FJG VS7-6-FPG
q Return spring SUS AXT500-12-2 — VFS3000-17-2 VFS3000-17-2 VFS3000-17-2
w Gasket NBR AXT500-13 AXT500-13 AXT500-13 AXT500-13 AXT500-13
e Gasket NBR AXT503-35 AXT503-35 AXT503-35 AXT503-35 AXT503-35
r Gasket NBR AXT503-12-1 AXT503-12-1 AXT503-12-1 AXT503-12-1 AXT503-12-1
t Mini-Y-packing NBR MY-11N MY-11N MY-11N MY-11N MY-11N
Pilot valve
y — AXT511A-쏔 AXT511A-쏔 AXT511B-쏔 AXT511B-쏔 AXT511B-쏔
assembly
u Detent assembly — AXT500-9 — — —
Double pilot
i — — — — — VV71-FPG
check spacer
o Packing NBR — — AXT643-2-1 — —
1.19-4
VS7-6
Without Sub-plate/Dimensions
VS7-6-FG-S-쏔쏔-Q VS7-6-FG-D-쏔쏔-Q
VS7-6-FHG-쏔쏔-Q VS7-6-FPG-쏔쏔-Q
VS7-6-FJG-쏔쏔-Q
1.19-5
VS7-6
With Sub-plate/Dimensions
VS7-6-FG-S-쏔쏔 Port size of sub-plate -Q VS7-6-FG-D-쏔쏔 Port size of sub-plate -Q
1.19-6
VS7-6
Symbol
Interface Regulator/Dimensions
¡Interface Regulator P regulation/ARB250-00-P
Symbol
A port regulation/ARB250-00-A
B port regulation/ARB250-00-B
P port reg-
ulation
A port
regulation
B port
regulation
1.19-7
Series VS7-6
Sub-plate
Specifications
Applicable solenoid valve/air operated valve Series ISO size q
Sub-plate size ISO size q
∗ Side piping 1 4 3 8
Piping
Bottom piping 1 4 3 8
Weight 0.37kg
∗ All R ports: 3 8
E VS7 1 A02
Piping
A02 Side piping 1 4 ∗
A03 Side piping 3 8 Thread
B02 Bottom piping 1 4 ∗ Rc (PT)
B03 Bottom piping 3 8 F G (PF)
∗ R port: 3 8 N NPT
T NPTF
Note:
Please note that single subplates and
manifolds have changed colour from
platinium silver to white as standard.
Valves will remain platinium silver.
Port size
Model Piping
P, A, B R1, R2
VS7-1-A02 Side 14 38
VS7-1-A03 Side 38
VS7-1-B02 Bottom 14 38
VS7-1-B03 Bottom 38
1.19-8
Series VS7-6
Manifold
The manifold Series VV71쏔 has a wide variety of functions and piping, compatible
with virtually any application.
Note:
Please note that single subplates and
manifolds have changed colour from
platinium silver to white as standard.
Valves will remain platinium silver.
Multiple Pressure SUP Style Main EXH Back Pressure Block Style
Allows supply of 2 or more different pressure ¡If there are many valve stations operating
to one manifold. at the same time and main EXH back
¡Put in a gallery blank disc ( AXT502-14 ) pressure may cause trouble, mount back
between the stations to operate at different pressure block plate (“AXT503-37A”) to
pressures. A dual pressure supply can be prevent effects of main EXH back pressure.
supplied from both the left and right sides
of the manifold. If 3 or more pressures are
supplied, the individual SUP spacer should
be used.
1.19-9
VS7-6
How to Order (Manifold)
Air release
Stations Piping/A, B port Control unit Piping/P, R1, R2 Port Silencer box valve/Rated voltage
1 1 02R 1 4 (Right) — Without 02D 1 4 (Bottom) W/o silencer — Without air release valve
— box
...
...
03R 3 8 (Right) Filter with auto-drain, regulator, 02U 1 4 (Top) 1 100V AC 50/60Hz
A
10 10∗ 02L 1 4 (Left) air release valve 02B 1 4 (Both sides) Silencer 2 200V AC 50/60Hz
SB box
∗ Includes F. R. Unit 03L 3 8 (Left) Filter with auto-drain, regulator, 03D 3 8 (Bottom) 3 24V DC
AP
(equivalent to 2 02Y 1 4 (Bottom) pressure switch, air release valve 03U 3 8 (Top)
∗ Mounting position 4 12V DC
stations). 03Y 3 8 (Bottom) M Filter with manual drain, regulator, air release valve 03B 3 8 (Both sides)
of silencer box is 9 Others(250V or less)
C6R One-touch for ø6 tube (Right) Filter with manual drain, regulator, One-touch fitting for in accordance
MP
pressure switch, air release valve
C12D
ø12 tube (Bottom) Order Contact SMC
C8R One-touch for ø8 tube (Right) with piping of R1 Made
for other voltages (9)
C10R One-touch for ø10 tube (Right) Filter with auto-drain, regulator One-touch fitting for and R2 ports.
F C12U
C6L One-touch for ø6 tube (Left) (air release valve-blank) ø12 tube (Top) Protective class
C8L One-touch for ø8 tube (Left) Filter with manual drain, regulator One-touch fitting for class I (Mark: )
G C12B ø12 tube (Both sides)
C10L One-touch for ø10 tube (Left) (air release valve-blank)
∗ Combination C Air release valve (filter, regulator-blank) ∗ Combination Note) Manifold exploded view
E see page 1.19-33 for details
∗ Please provide Air release valve ∗ Please provide piping
piping specifications. specifications.
Options
F. R. Unit for Manifold AXT502-9A (for manifold) Interface for reverse pressure AXT502-21A-1 ( 3 8 )
Air filter, regulator, pressure switch, air AXT502-18A (for air release R1, R2 individual EXH spacer VV71-R2-03
valve adaptor plate) Interface speed control AXT503-23A
release valve can be directly mounted Blank plate
MP2 (for control unit/filter Lock up cylinder adaptor
to the manifold base, simplifying piping. regulation valve) plate
AXT502-26A
Manifold blocks
— 2 2 2 2 2 2 2 1
necessary for mounting
F. R. Unit/Specifications
Air filter (w/auto-drain, w/manual drain)
Filtration 5μm
Regulator
Set press. (secondary) 0.05 to 0.85MPa
Pressure switch
Pressure regulation range 0.1 to 0.7MPa
Contacts 1ab
Rated current (Induction load) 125V AC 3A, 250V AC 2A
Air release valve (Single only)
Operating press. range 0.1 to 1.0MPa
1.19-10
VS7-6
Manifold/Dimensions
Common EXH
L: Dimensions n: Station
n Equation
L 1 2 3 4 5 6 7 8 9 10
( ): In case of direct manual override style. L1 107 150 193 236 279 322 365 408 451 494 L1=43n+64
L2 119 162 205 248 291 334 377 420 463 506 L2=43n+76
Manifold weight general formula=0.43n+0.49 (kg)
Individual EXH
1.19-11
VS7-6
Manifold/Dimensions
F. R. Unit
L: Dimensions n: Station
n Equation
L 2 3 4 5 6 7 8 9 10
L1 150 193 236 279 322 365 408 451 494 L1=43n+64
L2 162 205 248 291 334 377 420 463 506 L2=43n+76
L3 297 340 383 426 469 512 555 598 641 L3=43n+211
( ): In case of direct manual override style.
Bottom Piping
1.19-12
ISO Interface Solenoid Valve/SIZEw
Metal Seal
SeriesVS7-8
Single solenoid ( FG-S ) Double solenoid ( FG-D ) Reverse pressure (YZ-S)∗ Reverse pressure (YZ-D)∗
2 position
VS7-8-FPG-D
Closed centre ( FHG-D ) Exhaust centre ( FJG-D ) Double pilot check ( FPG-D ) Pressure centre ( FIG-D )∗
3 position
VS7-8-FHG-D
∗ Option
Standard Specifications
VS7-8-FG-D
Fluid Air/lnert gas
VS7-8-FG-S Operating pressure 0.1 to 1.0MPa
o
Ambient and fluid temperature 5 to 60 C
Note: Manual override Non-locking style, Locking style∗
Please note that single subplates and Electrical entry DIN connector
manifolds have changed colour from Non-lube
Lubrication
platinium silver to white as standard. If provided, use turbine oil ( ISO, VG32 )
Valves will remain platinium silver. Shock/Vibration resistance (1) 150/50 m/s2
Applicable sub-plate VS7-2 (ISO size w )
∗ Option
NOTE 1): Shock resistance: No malfunction resulted from the impact test using a drop impact tester. The test was performed on the axis and right angle
directions of the main valve and armature, for both energized and de-energized states. (Value in the initial stage.)
Vibration resistance: No malfunction occurred in a one-sweep test between 8.3 and 2000 Hz. Test was performed at both energized and de-
energized states to the axis and right angle directions of the main valve and armature. (Value in the initial stage.)
Pilot Valve/Spacifications
Part No. AXT511C-1 (V) AXT511C-2 (V) AXT511C-3 (V) AXT511C-4 (V)
Rated voltage (V) 100V AC 50/60 Hz 200V AC 50/60 Hz 24V DC 12V DC
Inrush current (A) 0.049/0.043 0.024/0.021
0.075 0.15
Holding current (A) 0.031/0.02 0.015/0.01
Allowable voltage (V) 85 to 110% of rated voltage
o
Insulation Class B (130 C) or equivalent
(V): Pilot EXH individual style.
Option/Interface Regulator
(1)
Interface regulator model ARB350
Accessories Applicable solenoid valve VS7-8
Mounting bolt Regulation port A B P
TA-B-6 X 45 Proof pressure 1.5MPa
( with washer )
Packing AXT510-13 Max. operating pressure 1.0MPa
Indicator Iight ( Option ) Set pressure range 0.1 to 0.83 MPa
o
Ambient and fluid temperature 5 to 60 C
Optional Specifications Pressure gauge port size 18
Surge voltage Weight (kg) 0.83
Available
suppressor (2) P/A 40 31 27
Air supply side eff. area S (P=0.7MPa, P1=0.5MPa) (mm2)
Reverse R1/R2 port: Pressure in P/B 31 34 27
pressure R1=P1 pressure R2=P2 pressure, P1<=P2 (2) A/EA 60 mm2
Air exhaust side eff. area S ( P2=0.5MPa)
B/EB 53 mm2
Note 1) Use "ABR210" for pressure centre style and reverse pressure style.
Option Note 2) Synthesized effective area with 2 position single style solenoid valve.
Blank plate AXT512-9A
Model
Effective area Max. operating rate (1) Response time (2) Weight (3)
No. of positions Model (WitH3 8 sub-plate)
(mm2) (Nl/min) (cycle/sec) (sec) (kg)
2 (Single) VS7-8-FG-S-쏔-Q 58 (3140.80) 15 0.040 or less 0.655
2 (Double) VS7-8-FG-D-쏔-Q 58 (3140.80) 15 0.020 or less 0.74
3 (Closed centre) VS7-8-FHG-D-쏔-Q 58 (3140.80) 10 0.05 or less 0.89
3 (Exhaust centre) VS7-8-FJG-D-쏔-Q 58 (3140.80) 10 0.05 or less 0.89
3 (Pilot check) VS7-8-FPG-D-쏔-Q 40 (2159.30) 8 0.06 or less 2.12
(1) Min. operating frequency is based on JIS B8375. (Once in 30 days) (3) Weight without sub-plate (Sub-plate: 0.37kg)
(2) Based on JIS B8375-1975 (At 0.5MPa) (4) (1) and (2) are the rates in the condition of controlled clean air.
1.19-13
VS7-8
3 Position Double Pilot Check Valve/Operation Pressure Characteristics Cylinder Speed/Stop Position Range
Check Valve (Wedge pack- The check valve will operate correctry
ing style) providing that cylinder side pressure is
not in excess of two times the supply
VS7-8-FHG-D-쏔R pressure.
3 position double pilot check valve
achieves a reduction in air leakage as a
result of main valve construction which
features co-axial wedge packing (Max.
leakage: 10 cm3/min (ANR)).
Caution
쎲Verify that there is no leakage from the
pipes between valve and cylinder, and
from fittings. Check for leaks by using
neutral detergent solution before use. Also
check the cylinder packing and the piston
packing. If there is leakage, cylinder may
not stop at the mid-stroke position, and
could move immediately after the valve is Cylinder Operation Chart
de-energized.
쎲Be aware that if the exhaust side is restrict-
ed excessively, the intermediate stopping
accuracy will decrease and will lead to
improper intermediate stops.
1.19-14
VS7-8
How to Order
Thread
Rc (PT)
F G (PF)
E VS7 8 FG S 1 Q N NPT
T NPTF
Symbol No. of solenoids Rated voltage Option Port size of sub-plate Connector
S Single 1 100V AC — None — Without sub-plate — Connector
FG FJG D Double 2 200V AC N Indicator light A03 Side piping 3 8 O W/o connector
3 24V DC M Direct manual override A04 Side piping 1 2
4 12V DC Z Indicator light with surge
voltage suppressor A06 Side piping 3 4
YZ∗
Others Wedge packing style with
FPG 9 (250V or less)
MR direct manual override B03 Bottom piping 3 8
R Wedge packing style B04 Bottom piping 1 2
Order Contact SMC V Individual pilot EXH B06 Bottom piping 3 4
Made
FIG∗
FHG for other voltages (9)
∗ If specifying more than
Protective class one symbol, indicate them
∗ Option class I (Mark: ) in alphabetical order.
Ordering source area code
Note:
Code areas
Manifold exploted view see page 1.19-34
Japan, Asia
- for details.
Australia
E Europe
N North America
Precautions
Be sure to read before handling. Refer to p.0-33 to 0-36 for Safety Instructions and common
precautions.
Caution
DIN Connector (Wiring) Interface Regulator Specifications
Specifications
Interface regulator model ARB350
Applicable solenoid valve VS7-8
Regulation port A B P
Max. operating pressure 1.0MPa (1)
Set pressure range 0.1 to 0.83MPa (2)
o
Ambient and fluid temperature 5 to 60 C (3)
Pressure gauge port size 18
Weight (kg) 0.83
Air supply side eff. area (mm2) P A 40 31 27
S (P=0.7MPa, P1=0.5MPa) P B 31 34 27
Air exhaust side eff. area A EA 60 mm2
S (P2=0.5MPa) B EB 53 mm2
Note 1) Maximum operating pressure of solenoid valve is 0.9 MPa.
Note 2) Be sure to set pressure within setting pressure range of the solenoid valve.
o
Note 3) Solenoid valve: Max. 50 C
Note 4) Synthesized effective area with 2 position single style solenoid valve.
Note 5) •Supply pressure to interface regulator only from P port except when it is used with reverse
pressure style valve.
•Use the ARB210 or ARB310 model to combine a pressure centre valve and the A and B port
pressure reduction of a spacer style regulator.
•Use the ARB210 or ARB310 model to combine a reverse pressure valve and a spacer style
regulator. The P port pressure reduction cannot be used.
•To use a perfect valve and a spacer style regulator, use a manifold or a sub plate as the standard
and stack in the following order: the perfect spacer, spacer style regulator, and the valve.
•When a closed centre valve is combined with the A and B port pressure reduction of a spacer style
regulator, it cannot be used for intermediate stops of the cylinder because of the leakage from the
relief port of the regulator.
1.19-15
VS7-8
Construction
VS7-8-FG-S-쏔쏔-Q VS7-8-FG-D-쏔쏔-Q
VS7-8-FHG-쏔쏔-Q VS7-8-FPG-쏔쏔-Q
VS7-8-FJG-쏔쏔-Q
VS7-8-FHG-D-쏔R-Q
Replacement Parts
Part No.
No. Description Material
VS7-8-FG-S VS7-8-FG-D VS7-8-FHG VS7-8-FJG VS7-8-FPG
q Return spring SUS AXT510-12 — AXT510-21 AXT510-21 AXT510-21
w Gasket NBR AXT510-13 AXT510-13 AXT510-13 AXT510-13 AXT510-13
e Gasket NBR AXT510-14-2 AXT510-14-2 AXT510-14-2 AXT510-14-2 AXT510-14-2
r Gasket NBR AXT510-14-1 AXT510-14-1 AXT510-14-1 AXT510-14-1 AXT510-14-1
t Mini-Y-packing NBR MY-16N MY-16N MY-14N MY-14N MY-14N
Pilot valve
y — AXT511C-쏔 AXT511C-쏔 AXT511C-쏔 AXT511C-쏔 AXT511C-쏔
assembly
u Detent assembly — AXT510-9 — — —
Double pilot
i — — — — — VV72-FPG
check spacer
o Packing NBR — — AXT644-7-1 — —
1.19-16
VS7-8
With Sub-plate/Dimensions
VS7-8-FG-S-쏔쏔-Q VS7-8-FG-D-쏔쏔-Q
VS7-8-FHG-쏔쏔-Q VS7-8-FPG-쏔쏔-Q
VS7-8-FJG-쏔쏔-Q
1.19-17
VS7-8
Without Sub-plate/Dimensions
VS7-8-FG-S-쏔쏔 Port size of sub-plate -Q VS7-8-FG-D-쏔쏔 Port size of sub-plate -Q
1.19-18
VS7-8
Interface Speed Control/Dimensions
¡Interface Speed Control
AXT510-32A
Symbol
Interface Regulator/Dimensions
P port regulation/ARB350-00-P
¡Interface Regulator
Symbol
A port regulation/ARB350-00-A
B port regulation/ARB350-00-B
P port
regulation
A port reg-
ulation
B port
regulation
1.19-19
Series VS7-8
Sub-plate
Sub-plate: Series VS7-2/VSA7-2
Specifications
Applicable solenoid valve/air operated valve Series ISO size w
Sub-plate size ISO size w
Side piping: 3 8 ,1 2 3 4
Piping
Bottom piping: 3 8 , 1 2 , 3 4
Weight 0.68kg (3 8,1 2 )1.29kg (3 4)
How to Order
E VS7 2 A03
Thread
Piping Rc (PT)
A03 Side piping: 3 8 F G (PF)
A04 Side piping: 1 2 N NPT
A06 Side piping: 3 4 T NPTF
B03 Bottom piping: 3 8
B04 Bottom piping: 1 2
Note: B06 Bottom piping: 3 4
Please note that single subplates and
manifolds have changed colour from Ordering source area code
platinium silver to white as standard. Code areas
Valves will remain platinium silver. Japan, Asia
-
Australia
E Europe
N North America
Dimensions
1.19-20
Series VS7-8
Manifold
Standard Specifications
Manifold block size ISO Size w
Applicable solenoid valve Series ISO Size w
Number of stations 1 to 10
A, B-port 3 8, 1 2
Piping
P, R1, R2-port 1 2, 3 4
Individual SUP spacer VV72-P-쏔
Individual EXH spacer VV72-R-쏔
AXT512-14-1A (for P port)
Gallery blank disc (Differential pressure style)
AXT512-14-2A (for R1, R2 port)
The manifold Series VV72쏔 has a wide variety of functions and porting
compatible with virtually any application need.
Common EXH Style Individual EXH Style
Every valve is supplied and exhausted by the Every valve has an independent EXH port of
same SUP and EXH ports running through its own.
the connected manifolds. This is the most pop- ¡An individual EXH spacer (VV72-R-03, 04)
ular configuration. When there are 5 or mounted on the manifold block allows each
more stations operating simultaneously and valve to exhaust individually.
pilot back pressure is 0.2kgf/cm2 or more, it
is recommended that all pilot EXH ports (PE) Individual SUP Style
of the manifold base (4 on U side and 2 on ¡An individual SUP spacer (VV72-P-03, 04)
D side, total 6 ports) be opened. mounted on the manifold-block allows each
Also, use “AN110-01” for silencer for pilot EXH. valve to be supplied individually.
V Type
V type allows combinations with valves of
varying body size. ( Interface adapter plate
Note: VV72-V-1 ) Multiple Pressure SUP Style
Please note that single subplates and
Allows supply of 2 or more different pres-
manifolds have changed colour from
sures to one manifold.
platinium silver to white as standard.
¡Put in a gallery blank disc (AXT512-14-1A)
Valves will remain platinium silver.
between the stations to operate at different
pressures. When using a dual pressures
supply, the pressure can be supplied from
both the left and right sides of the manifold.
Main EXH Back Pressure Block Style If 3 or more pressures are supplied, pressure
¡If there are many valve stations operating at should be supplied from the spacer (VV72-
the same time and main EXH back pressure P-쏔) port.
may cause trouble, mount back pressure
block plate (“AXT503-37A”) to prevent effects Bottom Piping Style (3/8, 1/2)
of main EXH back pressure. When side piping appearance is not accept-
able or space is limited, bottom piping for A
or B ports is possible.
Stations Piping/A, B port Air release valve Piping/P, R1, R2 Port Silencer box Air release valve/Voltage
1 1 03R 3 8 (Right) Without air 04D 1 2(Bottom) Without Without air
— — —
release valve release valve
...
...
Option
AXT512-9A
Blank plate
AXT512-18A for air release
valve adaptor plate
Air release valve adaptor plate AXT512-17A
Interface Relief P (P port reguralation)
ARB350-00- A (A port reguralation)
regulator style B (B port reguralation)
AXT512-19A-1 3 8
Interface for reverse pressure
AXT512-19A-2 1 2
R1, R2 Individual
VV72-R2-04
EXH spacer
Interface speed control AXT510-32A
Main EXH back pressure
AXT512-25A
block plate
1.19-22
VS7-8
Manifold/Dimensions
L: Dimensions Common EXH
Size n 1 2 3 4 5 6 7 8 9 10 Equation
L
L1 120 176 232 288 344 400 456 512 568 624 n: stations
12 L1=56n+64
L2 136 192 248 304 360 416 472 528 584 640 L2=56n+80
L1 146 202 258 314 370 426 482 538 594 650 n: stations
34 L1=56n+90
L2 162 218 274 330 386 442 498 554 610 666 L2=56n+106
Manifold weight general formula M=0.96n+0.77 (kg)
Individual SUP
1.19-23
VS7-8
Manifold/Dimensions
L: Dimensions V Type
Size n 1 2 3 4 5 6 7 8 9 10 Equation
L
L1 120 176 232 288 344 400 456 512 568 624 n: stations
12 L1=56n+64
L2 136 192 248 304 360 416 472 528 584 640 L2=56n+80
L1 146 202 258 314 370 426 482 538 594 650 n: stations
34 L1=56n+90
L2 162 218 274 330 386 442 498 554 610 666 L2=56n+106
Bottom Piping
1.19-24
Air Operated/SIZEqw
SeriesVSA7-6/VSA7-8
Single (FG-S) Double (FG-D) Reverse pressure∗(YZ-S)
2 position
VSA7-6-FG-D
Closed centre (FHG-D) Exhaust centre (FJG-D) Double pilot check (FPG-D) Pressure centre∗ (FIG-D)
3 position
∗ Option
VSA7-6-FJG-D
VSA7-6-FG-S Specifications
Fluid Air/Inert gas
Max. operating pressure 1.0MPa
Min. operating YZ-S, FG-S (1) 0.1MPa
VSA7-8-FJG-D (3)
pressure Others 0MPa
Proof pressure 1.5MPa
Ambient and fluid temperature –10 to –60oC (2)
Lubrication Not required.
Shock/Vibration resistance (4) 150/50m/s2
Enclosure Dust proof
Manual override Non-locking push style (Option)
Pilot air pressure (3) 0.1 to 1.0 to 10.2 MPa
Note 1) Min. operating pressure should be equivalent to or lower than pilot supply pressure.
Note 2) Use dry air at the low temperatures.
VSA7-8-FG-D Note 3) Use controlled clean air.
VSA7-8-FG-S
Note 4) Shock resistance: No malfunction resulted from the impact test using a drop impact tester. The test was performed on the axis and
right angle directions of the main valve and armature, for both energized and de-energized states. (Value in the
initial stage.)
Vibration resistance: No malfunction occurred in a one-sweep test between 8.3 and 2000 Hz. Test was performed at both
energized and de-energized states to the axis and right angle directions of the main valve and armature. (Value
in the initial stage.)
Model
Effective area Effective area
No. of positions Model No. of positions Model
(mm2)(Nl/min) (mm2)(Nl/min)
2 (Single) VSA7-6-FG-S 27 (1472.25) 2 (Single) VSA7-8-FG-S 58(3140.80)
2 (Double) VSA7-6-FG-D 27 (1472.25) 2 (Double) VSA7-8-FG-D 58(3140.80)
Size q 3 (Closed) VSA7-6-FHG-D 25.5 (1374.10) Size w 3 (Closed) VSA7-8-FHG-D 58(3140.80)
Series 3 (Exhaust) VSA7-6-FJG-D 27 (1472.25) Series 3 (Exhaust) VSA7-8-FJG-D 58(3140.80)
VSA 7-6 3 (Pilot check) VSA7-6-FPG-D 20 (1079.65) VSA 7-8 3 (Pilot check) VSA7-8-FPG-D 40(2159.30)
3 (Pressure) VSA7-6-FIG-D 25.5 (1374.10) 3 (Pressure) VSA7-8-FIG-D 58(3140.80)
2 (Reverse pressure) VSA7-6-YZ-S 27 (1472.25) 2 (Reverse pressure) VSA7-8-YZ-S 58(3140.80)
Air Operated/Dimensions
SIZEq VSA7-6- FG -S-쏔쏔-쏔 SIZEq VSA7-6-FG-D-쏔쏔-쏔
YG
SIZEw VSA7-8-FG-D-쏔쏔-쏔
SIZEw VSA7-8- FG -S-쏔쏔-쏔
YG
( ): In case of VSA7-8
SIZEq VSA7-6-FPG-FPG-쏔쏔-쏔
FHG
SIZEq VSA7-6- FJG -쏔쏔-쏔 SIZEw VSA7-8-FPG-FPG-쏔쏔-쏔
FIG
FHG
SIZEw VSA7-8- FJG -쏔쏔-쏔
FIG
( ): In case of VSA7-8
1.19-26
Air Operated: SIZEq
Manifold
Manifold: Series VVA71
Standard Specifications
Manifold block size ISO size 1
Applicable valve Series ISO size 1
Stations 1 to 10∗
A, B port 1 4 ,3 8 One-touch fitting: ø6, ø8, ø10
Piping 3 8 One-touch fitting: ø12
P, R1, R2 port
Air filter (Auto drain, Manual drain), Regulator,
Control unit
Pressure switch, Air release valve
Individual SUP spacer VV71-P-쏔(02: 1 4 ,03: 3 8 ,C10: ø10)
Individual EXH spacer VV71-R-쏔(02: 1 4 , 03: 3 8 , C10: ø10)
Block plate (Differential pressure style) AXT502-14
∗ Including F.R. Unit (equivalent to 2 stations).
The manifold Series VVA71 has a wide variety of functions and piping,
compatible with virtually any application.
Common EXH Style Bottom Piping Style/1/4, 3/8 (A, B port)
Every valve is supplied and exhausted by the When side piping appearance is not accept-
same SUP and EXH ports running through able or space is limited, either some of, or
the connected manifolds. This is the most all ports, can be arranged with bottom piping.
popular configuration. Individual EXH Style
¡An individual EXH spacer (VVA71-R-쏔)
mounted on the manifold block allows each
valve to exhaust individually.
Individual SUP Style
¡An individual SUP spacer (VVA71-P-쏔)
Multiple Pressure SUP Style mounted on the manifold block allows each
Allows supply of 2 or more different levels of pressures to one valve to be supplied individually.
manifold.
¡Put in a gallery blank disc (AXT502-14) between the stations
to operate at different pressures. A dual pressure supply can be
applied to both the left and right sides of the manifold. If 3 or more
pressures are supplied, the individual SUP spacer should be used.
How to Order
...
body side
10 10 stations∗
Manifold application example ∗ Including F.R. Unit (2 stations)
Manifold
2
block side
Piping (A, B port)
Piping (P, R1, R2 port)
02R 1 4 (Right)
03D 3 8 (Bottom)
03R 3 8 (Right)
03U 3 8 (Top)
02L 1 4 (Left)
03B 3 8 (Both sides)
03L 3 8(Left)
C12D One-touch fitting ø12 (Bottom)
02Y 1 4 (Bottom)
C12U One-touch fitting ø12 (Top)
03Y 3 8 (Bottom)
C12B One-touch fitting ø12 (Both sides)
C6R One-touch fitting ø6 (Right)
∗∗ Mix
C8R One-touch fitting ø8 (Right) ∗ ∗ Indicate piping specifications.
C10R One-touch fitting ø10 (Right)
Control Unit
C6L One-touch fitting ø6 (Left)
— None
One-touch fitting ø8 (Left)
C8L
A Filter with auto drain, regulator, air release valve∗
C10L One-touch fitting ø10 (Left)
AP Filter with auto drain, regulator, air release valve, pressure switch
∗ Mix Filter with manual drain, regulator, air release valve∗
M
∗ Indicate piping specifications. MP Filter with manual drain, regulator, air release valve, pressure switch
F Filter with auto drain, regulator (air release valve blank plate)
G Filter with manual drain, regulator (air release valve blank plate)
C Air release valve∗(filter, air release valve blank plate)
E Air release valve∗
∗ Indicate pilot supply port.
1 VSA7-6-FG-S-1
2 VSA7-6-FG-S-2
1.19-27
VSA7-6/VSA7-8
Manifold/Dimensions
Individual SUP
1.19-28
VSA7-6/VSA7-8
Manifold/Dimensions
Control unit
L: Dimensions n: Station
n Equation
L 2 3 4 5 6 7 8 9 10
L1 150 193 236 279 322 365 408 451 494 L1=43n+64
L2 162 205 248 291 334 377 420 463 506 L2=43n+76
L3 297 340 383 426 469 512 555 598 641 L3=43n+211
Bottom Piping
1.19-29
Air Operated: SIZEw
Manifold
Manifold: Series VVA72
Standard Specifications
Manifold block size ISO size 2
Applicable valve Series ISO size 2
Stations 1 to 10∗
A, B port 38 12
Piping 12 34
P, R1, R2 port
Individual SUP spacer VV72-P-쏔
Individual EXH spacer VV72-R-쏔
AXT512-14-1A (for P port)
Block plate (Differential pressure style)
AXT512-14-2A (for R1, R2 port)
∗ Including F. R. Unit (equivalent to 2 stations).
The manifold Series VVA72쏔 has a wide variety of functions and piping,
compatible with virtually any application.
Common EXH Style Individual EXH Style
Every valve is supplied and exhausted by the ¡An individual EXH spacer (VVA72-R-03/04)
same SUP and EXH ports running through mounted on the manifold block allows each
the connected manifolds. This is the most pop- valve to exhaust individually.
ular configuration. Individual SUP Style
¡An individual SUP spacer (VVA72-P-03/04)
mounted on the manifold block allows each
valve to be supplied individually.
...
10 10 stations∗
2 Manifold block side
Piping (A, B port)
03R 3 8 (Right) Piping (P, R1, R2 port)
04R 1 2 (Right) 04D 1 2 (Bottom)
1.19-30
VSA7-6/VSA7-8
Manifold/Dimensions
Common EXH
L: Dimensions
n: Station
n Equation
Size L 2 3 4 5 6 7 8 9 10
12
L1 176 232 288 344 400 456 512 568 624 L1=56n+64
L2 192 248 304 360 416 472 528 584 640 L2=56n+80
34
L1 202 258 314 370 426 482 538 594 650 L1=56n+90
L2 218 274 330 386 442 498 554 610 666 L2=56n+106
( ): 3/4
Individual SUP
( ): 3/4
1.19-31
VSA7-6/VSA7-8
Manifold/Dimensions
V Type
L: Dimensions n: Station
Size n 2 3 4 5 6 7 8 9 10 Equation
L
12
L1 176 232 288 344 400 456 512 568 624 L1=56n+64
L2 192 248 304 360 416 472 528 584 640 L2=56n+80
( ): 3/4 L1 202 258 314 370 426 482 538 594 650 L1=56n+90
34
L2 218 274 330 386 442 498 554 610 666 L2=56n+106
Bottom Piping
( ): 3/4
1.19-32
VS7-6
Manifold Exploded View VS7-6
D side end plate assembly Tension bolt Manifold block assembly U side end plate assembly
< End plate assembly > <Tension bolt part number >
E AXT502 A AXT502 34
End plate position
L L side
Number of stations
R R side P, R port size 2 For 2 stations
Ordering source area code 02 1/4 3 For 3 stations
…
…
< Manifold block assembly> ∗ This manifold block assembly includes tension bolts for a single station addition.
1.19-33
VS7-8
Manifold Exploded View VS7-8
D side end plate assembly Manifold block assembly U side end plate assembly
E AXT512 A E AXT512 1A
End plate position
P, R port size Cylinder port position
L L side Porting specification
04 1/2 L L side
R R side A Side
06 3/4 R R side
B Bottom
C12 ø12 One-touch fitting
Ordering source area code
Cylinder port size
Code areas Ordering source area code
Japan, Asia 03 3/8
- Code areas
Australia 04 1/2
Japan, Asia
Europe -
E Australia
N North America E Europe
N North America
< Manifold block replacement parts>
Part No. Description Qty. Material
AXT512-13 O-ring 2 NBR
AS568-022 O-ring 1 NBR
AS568-020 O-ring 2 NBR
AXT512-5 Gasket 1 NBR
AXT512-4 Plate 1 SPCC
M4X10 Oval countersunk head screw 2 SWRH3
AXT512-6-1 Connection fitting A 2
AXT512-6-4 Connection fitting B 2
AXT512-6-3 Hexagon socket head screw 2
1.19-34
These safety instructions are intended to prevent hazardous situations and/or equipment
Safety Instructions damage. These instructions indicate the level of potential hazard with the labels of
“Caution,” “Warning” or “Danger.” They are all important notes for safety and must be
followed in addition to International Standards (ISO/IEC) 1), and other safety regulations.
Caution indicates a hazard with a low level of risk 1) ISO 4414: Pneumatic fluid power – General rules relating to systems.
ISO 4413: Hydraulic fluid power – General rules relating to systems.
Caution: which, if not avoided, could result in minor or moderate
IEC 60204-1: Safety of machinery – Electrical equipment of machines.
injury. (Part 1: General requirements)
Warning indicates a hazard with a medium level of risk ISO 10218-1: Manipulating industrial robots - Safety.
Warning: which, if not avoided, could result in death or serious etc.
injury.
Danger indicates a hazard with a high level of risk
Danger: which, if not avoided, will result in death or serious
injury.
Safety Instructions Be sure to read “Handling Precautions for SMC Products” (M-E03-3) before using.
SMC Corporation (Europe)
Austria +43 (0)2262622800 www.smc.at office@smc.at Lithuania +370 5 2308118 www.smclt.lt info@smclt.lt
Belgium +32 (0)33551464 www.smc.be info@smc.be Netherlands +31 (0)205318888 www.smc.nl info@smc.nl
Bulgaria +359 (0)2807670 www.smc.bg office@smc.bg Norway +47 67129020 www.smc-norge.no post@smc-norge.no
Croatia +385 (0)13707288 www.smc.hr office@smc.hr Poland +48 222119600 www.smc.pl office@smc.pl
Czech Republic +420 541424611 www.smc.cz office@smc.cz Portugal +351 214724500 www.smc.eu apoioclientept@smc.smces.es
Denmark +45 70252900 www.smcdk.com smc@smcdk.com Romania +40 213205111 www.smcromania.ro smcromania@smcromania.ro
Estonia +372 651 0370 www.smcee.ee info@smcee.ee Russia +7 (812)3036600 www.smc.eu sales@smcru.com
Finland +358 207513513 www.smc.fi smcfi@smc.fi Slovakia +421 (0)413213212 www.smc.sk office@smc.sk
France +33 (0)164761000 www.smc-france.fr supportclient@smc-france.fr Slovenia +386 (0)73885412 www.smc.si office@smc.si
Germany +49 (0)61034020 www.smc.de info@smc.de Spain +34 945184100 www.smc.eu post@smc.smces.es
Greece +30 210 2717265 www.smchellas.gr sales@smchellas.gr Sweden +46 (0)86031240 www.smc.nu smc@smc.nu
Hungary +36 23513000 www.smc.hu office@smc.hu Switzerland +41 (0)523963131 www.smc.ch info@smc.ch
Ireland +353 (0)14039000 www.smcautomation.ie sales@smcautomation.ie Turkey +90 212 489 0 440 www.smcturkey.com.tr satis@smcturkey.com.tr
Italy +39 03990691 www.smcitalia.it mailbox@smcitalia.it UK +44 (0)845 121 5122 www.smc.uk sales@smc.uk
Latvia +371 67817700 www.smc.lv info@smc.lv
Printing BR 00 Printed in Spain Specifications are subject to change without prior notice and any obligation on the part of the manufacturer