Professional Documents
Culture Documents
Building Material MCQ
Building Material MCQ
all the above. 43. Initial setting time of cement for asbestos
cement products should be not less than
37. Sewer pipes are made of A 30 minutes
A earthen ware B 50 minutes
B stone ware C 75 minutes
C refractory clay D 90 minutes.
D terracota
44. The variety of pig iron used for the
manufacture of steel by Bessemer process, is
A Bessemer pig
B Grey pig
C White forge pig
D Mottled pig.
47. Plastic
A is an organic substance
B consists of natural or synthetic binders
C finished products are rigid and stable at
normal temperature
D is capable of flow when necessary heat and
pressure are applied
E All the above.
3. The foliated structure is very common in 12. Iron ore may contain
A sedimentary rocks A carbon
B igneous rocks B silicon
C metamorphic rocks C sulphur
D none of these. D phosphorus and maganese
E all the above.
4. Turpentine oil is used in paints as
A thinner 13. Wrought iron is used for
B vehicle A structural works in beams
C base B small sized water pipes
C columns and struts A emulsion paints
D none to these. B plastic paints
C bituminous paints
D aluminium paints
14. The timber having maximum resistance E cellulose paints.
against white ants, is obtained from
25. Bulking of sand is caused due to
A chir A surface moisture
B shisham B air voids
C sal C viscosity
D teak. D clay contents
E all the above.
15. Knots in timber are
A defects caused by crushing fibres 26. The normal curing period for lime mortar, is:
B splits radiating from the centre A one day
C speckled strains B 3 days
D signs of branches cut off. C 7 days
D 10 days
17. Lime concrete is generally used for E 14 days.
A wall foundations
B flooring at ground level
C both (a) and (b) 27. The type of steel used for precision levelling
D neither (a) nor (b). staff, is
A Titanium steel
18. Bituminous fells are used for B Carbon steel
A covering A.C. sheets C Invar
B covering sloping roofs D Stainless steel.
C D.P.C.
D none to these. 30. Pick up the incorrect statement from the
following:
A Plastics are chemical resistant
19. The minimum compressive strength of Ilnd B Plastics are durable
class bricks should be C Plastics are ductile
A 75 kg/cm2 D Plastics are excellent electric insulators.
B 90 kg/cm2
C 100 kg/cm2 31. Pick up correct statement from the following:
D 120 kg/cm2 A Fibre boards are used for thermal and
acoustic control
20. Stuco paints are suitable for B Fibre boards are used for light weight standing
A stone masonry members
B brick walls C Fibre boards are obtained by impregnating a
C both (a) and (b) resin product on fibres
D neither (a) nor (b). D all the above.
38. Pick up the correct statement from the 44. The operation of removal of impurities or
following: clay adhering to iron ores, is known as
A Quick lime is obtained by burning pure lime A dressing
stone: B calcination
B Hydraulic lime is obtained by burning lime C roasting
stone containing clay 5% to 30% D smelting.
C Poor lime is obtained by burning lime stone
containing impurities more than 5%
D All the above. 45. If water required for 1 bag of cement is 30
litres, the water cement ratio is :
A 0.40
B 0.50
39. The presence of original rounded surface on C 0.60
the manufactured piece of timber, is called D None of these.
A Wane
B Torn grain 46. Portland cement manufactured from pure
C Diagonal grain white chalk and clay but free from iron-oxide, is
D Chipmark. known as
A quick setting cement
B rapid hardening cement
40. Smith's test of stones is performed to find C white cement
out D low heat Portland cement.
A the presence of soluble matter of stone
B the compressive strength of the stone
C the hardness of the stone 47. Dry rot
D the toughness of the stone. A cracks the timber
B reduces the strength of timber
41. The cracks caused by shrinkage of the C reduces the timber to powder
exterior surface of the wood exposed to D shrinks the timber
atmosphere, are called: E spoils the appearance of timber.
A radial shakes
B heart shakes
C wind cracks 49. The weight of 1 m3 of brick earth, is about
D twisted fibres. A 1200 kg
B 1500 kg
C 1800 kg
D 2000 kg.
50. Pozzolana (or surkhi) is used in lime
A to impart hydraulicity
B to prevent shrinkage
C to decrease the cost of construction
D to decrease the setting time.
35. Cast iron is used for 44. For making fly-ash building bricks, the
A structural works in beams following mix of fly-ash, sand and lime, is
B small sized water pipes A 80 : 13 : 7
C columns and struts B 70 : 20 : 10
D none to these. C 60 : 35 : 5
D none of these.
36. Stainless steel resists corrosion due to
A carbon 45. Pick up the correct statement from the
B sulphur following:
C vanadium A Lime is available in free state
D chromium B Lime is available by dissolving calcium
E maganese. carbonate in water
C Lime is available by calcining calcium
carbonate at 900°C
37. Commonly used thinner in D Lime is nothing but calcium chloride
A lacquer paints, is alcohol E None of these.
B cellulose paints is ethyle acetate
C oil paints, is naptha 46. Water paint is a
white wash
colour wash
whiting
distemper
all the above.
7.The plastics prepared from Vinyl resin are 17.The term frog means
A odourless A an apparatus to lift the stone
B non-toxic B a depression on a face of brick
C transparent C vertical joint in a brick work
D colourless D soaking brick in water.
E all of these.
18.Asphalt is obtained from
8.Chlorite, a green colour mineral is mainly A petroleum distillation
derived from the decomposition of B bitumen distillation
A augite C plastic distillation
B biotite D none of these.
C horn blende
D All of these. 19.To retard the initial setting time of cement,
the compound responsible, is
A Tricalcium silicate A increasing moisture content
B Gypsum B decreasing moisture content
C Di-calcium silicate C increasing strength of timber
D Tri calcium aluminate. D none to these.
21.Stones used for rubble masonry must be 31.For a 50 kg cement bag water required, is
A soft A 16.5 litres
B hard
B 18.5 litres
C light
D heavy. C 20.5 litres
39.Basalt is
A sedimentary rock
B metamorphic rock
C extrusive igneous rock
D intrusive igneous rock.
2.Most commonly used solvent in oil paints, is 15.A prime coat is given to steel work with
A petroleum A an oxide of iron paint
B spirit B a mixture of white lead and lead paint
C coaltar C a special paint
D turpentine. D cement paint.
9.The rocks formed from molten magma, are called 19.The wedging is adopted for quarrying costly
A sedimentary rocks stratified rock such as
B igneous rocks A laterite
C metamorphic rocks B marble
D none of these. C limestone
D sandstone
10.Bitumen paints offer E All the above.
A pleasing surface
B hard surface 20.Rapid hardening cement attains early
C smooth surface strength due to
D protective surface A larger proportion of lime grounded finer than
E rough surface. normal cement
B lesser proportion of lime grounded coarser
12.The lime which contains high percentage of than normal cement
calcium oxide, is generally called C lesser proportion of lime grounded finer than
A fat lime normal cement
B rich lime D larger proportien of lime grounded coarser
C white lime than normal cement
D All of these. E excess percentage of gypsum.
22.Second class bricks
A are of dark brown colour
B produce a metallic sound when struck
C are well burnt
D are under burnt.