Professional Documents
Culture Documents
WV203 Manual AU NZ
WV203 Manual AU NZ
WV203 Manual AU NZ
WHAT'S INSIDE CHARGING THE BATTERY USING YOUR SHARK WANDVAC™ HANDHELD
3 4
D
1 E
Solid blue Blinking
Charging Charged
1 .
Press Power button.
1. Align the holes in the bottom of 3. Route the cord 2. Run the nozzle over the surface to be cleaned.
the ION Charging Stand with the through the groove 3. To empty the dust cup, hold your ION Handheld over the trash.
posts on the front of the Charging in the bottom of the
Base. Run the Charger Cord base and out the 4. Slide dust cup button forward to release debris.
between the posts. indent in the back. Fades in Dim
and out
2. With the cord in place, slide the 4. Insert the Accessory
stand down until it clicks securely Storage Tray into the
into place on the base. opening behind the NOTE: During first use, run the battery all the way down to properly
charging stand. condition it, then charge fully. It takes approximately 2.5 hours to NOTE: For maintenance, see reverse side.
charge battery completely.
MAINTENANCE MAINTENANCE ONE (1) YEAR LIMITED
REPLACEMENT WARRANTY
EMPTYING THE DUST CUP CLEANING THE FILTER For guarantee claims, you will need to submit a proof of purchase in the form of
a valid receipt that displays date and place of purchase. This warranty does not
replace but is in addition to your statutory rights.
If your product becomes defective due to faulty material or workmanship within
1 1 1 2 a period of 1 year from the date of purchase, we warrant to do the following:
• For New Zealand Consumers: We will replace the defective/faulty part with
a new product, free of charge, or if the unit is deemed defective/faulty we
replace the unit with an equivalent or upgraded model, at our discretion.
• For Australian Consumers: Our goods come with guarantees that cannot be
excluded under the Australian Consumer Law. You are entitled to a replacement
or refund for a major failure and for compensation for any other reasonably
foreseeable loss or damage. You are also entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the failure does not
amount to a major failure.
Replacement items will be covered by the limited warranty for the balance of the
warranty period from the date of the original purchase.
Your warranty is subject to the following conditions
• DO NOT operate the appliance with a damaged plug or cord, or if the unit has
been dropped, damaged or dropped in water.
1. With the dust cup open and 2. Hold the housing over a trash • To avoid the risk of electric shock, do not disassemble or attempt to repair the
2 3 the power off, pinch both
sides of the filter housing and
receptacle. Lift the fabric
filter by the metal ring to
appliance on your own. If the supply cord is damaged, it must be replaced by
a qualified electrician to avoid a hazard. Incorrect re-assembly or repair can
slide it forward to remove. remove it from the housing. cause a risk of electric shock or injury to persons when the appliance is used.
• The item has not been misused, abused, neglected, altered, modified or
To clean the fabric filter, tap to remove dust and large particles. repaired by anyone.
For deeper cleaning, hand-wash the filter with water only and let • The item has been subjected to fair wear and tear.
it air-dry for 24 hours before reinstalling.
• The item has not been used for trade, professional or hire purposes.
To clean the filter housing, make sure filter is removed, then • The item has not sustained damage through foreign objects, substances or accident
hand-wash with water only. Customer costs within warranty
The customer is responsible for any inwards freight charge to return a product
TROUBLESHOOTING AND ERROR CODES for warranty if requested, and outward freight charge for warranty parts and or
replacement unit.
LIGHT INDICATOR WHAT IT MEANS Who is covered?
Light blinking blue Low battery. This warranty applies only to the original purchaser, who bought the product from
an authorised retailer and may not be transferred. Proof of purchase is required.
1 . With the power off, slide the Open Dust Cup button forward, Blockage. Turn off power and
What is not covered?
and the dust cup will swing open. Light blinks blue twice, then pauses remove blockage, then turn
power back on. • Filters and brush rolls
2. Tap dust cup filter screen lightly to knock off dust and debris. • Accessories supplied with the item.
Solid blue light Power is on.
3. Wipe dust cup bristle lightly with dry cloth to remove dust • Components that are subject to natural wear and tear caused by normal use
Blue light fades in and out steadily Unit is charging. in accordance with operating instructions.
and dirt.
Dim blue light Unit is fully charged. • U nauthorised/improper maintenance/handling or overload is excluded from
this warranty.
Power is off, or unit needs to
No light
recharge.
1 . With the dust cup open and the power off, pinch AUS sharkclean.com.au
both sides of the filter housing and slide it forward to remove. NZ sharkclean.co.nz Proudly distributed by: Illustrations may differ from actual product. We
2. With the dust cup open, press and hold the release tab, and lift Mann&Noble Pty Ltd are constantly striving to improve our products,
Building D therefore the specifications contained herein are
off the dust cup. 33 Quarry Road subject to change without notice. SHARK WANDVAC
3. Hand-wash dust cup with soap and water only, and allow parts to TECHNICAL SPECIFICATIONS Erskine Park is a trademark of SharkNinja Operating LLC
air-dry completely before reinstalling. NSW, 2759
Australia © 2021 SharkNinja Operating LLC
Battery Voltage: 10.8V Shark Wandvac WV203ANZ
4. To reinstall, slide the tab on the dust cup into the slot on the AUS 02 8801 7666 PRINTED IN CHINA
Cord-Free
bottom of the nozzle until it clicks into place. Motor Watts: 115W NZ 0800 112 660
Handheld Vacuum charger
Do not wash any parts of this vacuum or its accessories in a dishwasher. Amps: 10.6A part number: 1076FI200 AUS sharkclean.com.au
NZ sharkclean.co.nz WV203ANZ_IB_E_MP_REV_21