Professional Documents
Culture Documents
Mk7C Factsheet English
Mk7C Factsheet English
com
Mk7C
ATLAS – Class 1 and Class 2
Key Features
Mk7C
ATLAS - Class 1 and Class 2
163.5mm (H) 51mm (D)
Standards and Compliance Real-time Clock • Ability to store average/minimum/ ANSI Type 2 (ANSI C12.18)
maximum values for interval duration - RS-232 with modem power supply
• Class 1 and Class 2 • Accuracy (internal) within 15 seconds
per month at 23˚C (It supports most modems in the
• IEC 62052-11, 62052-21, 62052-31*,
62053-21, 62053-23 Time of Use market)
• AS 62052.11, 62052.21, 62053.21, Data Memory • Up to 8 rates plus unified rate - RS-485
multi-drop (2 or 4-wire RJ45 or
62053.23 • 2.1 or 4.1*MB of non-volatile memory 2-wire screw terminal)
• Up to 32 separate import and export
• NMI M6 registers • Option for passive RS-232
• Daily, weekly, monthly, yearly and special • UDP/IP GPRS/PPP capable
Display
Measurement days • Compatible with MV-90™ and PLC
• Large 7 segment display
• 1 phase 2 wire • Up to 200 programmable special days
• Display digit size: 9.3mm x 4.35mm
• Up to 61 previous billing periods plus Protocol
• Up to 60 user-defined screens of any
Voltage billing totals • EDMI command line
meter parameter
• Nominal voltage: 220V - 240V • Block or rolling maximum demand • DLMS
• Definable enunciators
• Operating range: 176V - 276V • Time of maximum demand • MODBUS
• Display available without main power
• Withstand: Up to 290V • Energy, pulsing inputs
• Burden: IEC 62053-61 compliant
Calendar
Current Measured Values • Supports Daylight Saving time Software
• WC range: 5/100A, 10/100A • Supports Gregorian or Persian calendars • EDMI EziView software available for
• 1 element 4 quadrants
• WC limit: 7000A for 3 cycles meter programming and reading
• Import/Export/Absolute Wh, varh and
• Burden: <0.5VA/phase (Windows® compatible)
VAh Tamper Detection and Alarms
• Fundamental Wh • EDMI MultiDrive software available for
• Provision for sealing with conventional
large scale AMI and AMR solutions
Frequency • W, var, VA, Vrms, Irms wire or plastic seals
(Windows® compatible)
• 45Hz - 65Hz • Power factor, frequency, phasor angles • Reverse current detection
• Supported by many popular third-party
• Supports ripple control/AFLC • Advanced tamper detection and logging
multi-vendor AMR systems
Relay • Pre-programmed alarms for meter self-
• Supports Function Based Setup
check
• 100A IEC 62055-31 Annex C UC3 Power Quality Indication
• *Relay fault detection • Alarms trigger LEDs, enunciators, relay
• Total Harmonic Distortion (THD)
• Enhanced relay switching time ≤10s outputs or communications event
• Option for live waveform display
• May be ordered without a disconnect • Alarms are stored in event logs
• Sag/Swell Environmental
relay • Option for fixed-threshold magnetic
- 5 Cycle resolution • Specified operating range:
tamper detection
-R
ecords time/date/phase/duration/ -25˚C to +60˚C
Inputs/Outputs Configuration • *Option for high-sensitivity 3D magnetic
average and worst excursion • Limit range of operation:
• Up to 4 I/O total in 2 isolated groups tamper detection with configurable
- Programmable trigger levels threshold -40˚C to +70˚C
(maximum 1 relay output)
• Storage range limit:
• Options include: Passive/Active
inputs, S0/Relay outputs Load Survey/Profile Security -40˚C to +80˚C
• Passive input voltage: 5V, 12V, 48V • Over 5000 days storage (2 channels, • Relative humidity:
• Multi-level security (username and
• Active input voltage: 12V (common 30-minute intervals) password including encrypted log-in) Up to 75% mean, 95% non-condensing
ground) • Supports Advanced Demand for 30 days
• Up to 7 independent security levels
Management (ADM) with prioritised • Ingress protection: IP54
• S0 output: 27V, 27mA maximum • Up to 6 individual users
rules • Protective Class II
• Relay output: 240V, 2A • AES128 bit encryption
• AMI Ready • Surge Test: 5kV
• 2 Programmable LED indicators
• Programmable output pulse width: • Up to 32 channels and 4 independent • Impulse Test: 10kV
1ms to 100ms surveys
• Intervals programmable from 1 to 60
minutes
Communications
Battery
• Up to 3 independently working
• Internal battery • Energy, instantaneous readings,
communication ports:
pulsing inputs as channel sources
• Backup time: 10 years without power - Optical port: FLAG (IEC 62056-21) or
(Lithium Battery)