Professional Documents
Culture Documents
Van Fuel Tank
Van Fuel Tank
Van Fuel Tank
CONVENTIONAL PROCEDURE
Fig 1: Fuel Return Line, Fuel Feed Line & Fuel Line Mounting Bracket
1. Disconnect the fuel feed line (2) quick-connect fitting. Refer to QUICK-CONNECT FITTINGS .
2. Install the appropriate Fuel Line Adapters/Fitting from the (special tool #8978A, Decay Tool,
Fuel). Route the opposite end of this hose to an diesel fuel draining station.
3. Using a diagnostic scan tool, activate the fuel pump until the fuel tank is empty.
ALTERNATIVE PROCEDURE
4. Drain fuel tank using an approved diesel fuel draining and storage tank.
REMOVAL
REMOVAL
Fig 2: Identifying Fuel Fill Tube, Fuel Tank, And Hose Clamps
4. Remove hose clamp (2) and remove fuel fill hose from fuel tank.
6. Disconnect fuel line quick connect fittings (3) and (4) evaporator hoses (1) and (2). Refer to
QUICK-CONNECT FITTINGS .
INSTALLATION
INSTALLATION
2. Install the straps (1) and fuel tank. Tighten bolts (2) to 55 N.m (41 ft. lbs.).
3. Connect fuel line quick connect fittings (3) and (4) evaporator hoses (1) and (2).
Fig 9: Identifying Fuel Fill Tube, Fuel Tank, And Hose Clamps
5. Connect the fuel fill hose to the fuel tank, and install the hose clamp.