Professional Documents
Culture Documents
DPT 2020
DPT 2020
| 18-1134
CENTRAL INSTITUTE OF PLASTICS ENGINEERING & TECHNOLOGY
HEAD OFFICE GUINDY, CHENNAI 600 032.
ACADEMIC CELL
SUPPLEMENTARY EXAMINATION - SEPTEMBER 2020
PART-C
Answer any four questions (Max. 100 words) 4 x3 12
Inscribe a regular pentagon with a neat sketch in a given circle of diameter 50mm.
2, Construct the ellipse by using Oblong method.
3. Draw the projections of a regular hexagon of 25 mm side,
having one of its sides in the H.P. and
incline at 60° to the V.P., and its surface making an angle of 45° with the H.P.?
4. Divide a given straight line into
any number of equal parts.
5. The length of the top view of a line
parallel to the V.P. and inclined at 45° to the H.P. is 50 mm.
One end of the line is 12 mm above the H.P. and 25 mm in front of the
V.P. Draw the projections
of the line and determine its true
length?
PART-D
Answer any two questions (Max. 300 words)
2x5 10
1. What is diegeiat scaie? Construct a
decimete.s and centimeters and to measure
diagonal
scale of 3:200
i.e. 1:66 2/3 showing metres,
up to 6 metres.
2. A cube of 50 mm long
edged is resting on the H.P. with its vertical faces equally inclined to the
V.P. Draw its
projections?
3. A pictorial view of machine bracket is shown
in the figure. Draw using the first
method front view, top view and right end side view. angle projection
R A O
L0BE
** ****
*******a***** *****itm***add*ad