Professional Documents
Culture Documents
Cnzking Industrial Pump Product Brochur0705
Cnzking Industrial Pump Product Brochur0705
SLURRY PUMP
PRODUCT BROCHUR
As a professional Industrial / Slurry Pump manufacture,
ZKing always give top priority to products quality and
follow the instructions of ISO9001 faithfully.
www.kingslurrypump.com
COMPANY
01 Company introduction
02 Product Description
03 Zking Project
04 Company Vision
www.kingslurrypump.com
ABOUT ZKING
As a professional Industrial / Slurry Pump
manufacture, ZKing always give top priority to
1
products quality.
The main products such as Slurry Pump, Dredging
Pump, Froth Pump,Desulfurization Pump,and
Feeding Pump for Filter Press are widely used
in Mineral processing, Metallurgy, Coal industry,
Electric power, Petrochemical
industry,Dredging,Stack gas desulfurization, and
Environmental protection industries.
www.kingslurrypump.com
PRODUCT CATEGORIES
www.kingslurrypump.com
PRODUCT CATEGORIES
www.kingslurrypump.com
PRODUCT CATEGORIES
Product Features
Structure type
Type ZH/ZHR/ZHH/ZL slurry pumps are double shell cantilever horizontal centrifugal pump.
Transport materials
They are designed for conveying strong corrosion and high
concentration slag slurry.
Applications
They are widely used in metallurgy, mining, petroleum,
chemical industry, coal, electric power, transportation,
river dredging, building materials and municipal engineering etc.
Lining Materials
Wear resistant metal lining and rubber lining , they can be
used interchangeably.
Transmission Mode
DCZ direct drive, CRZ parallel belt drive , ZVZ upper and
lower belt drive, CV belt drive.
Shaft Seal Mode
Packing Seal, Expeller Seal,Mechanical Seal,etc
www.kingslurrypump.com
Construction Design
www.kingslurrypump.com
Shaft Seal Module Design
www.kingslurrypump.com
Eight Exit Directions
www.kingslurrypump.com
Four Transmission Modes
www.kingslurrypump.com
ZG(H) Gravel Pump
Product Features
Structure type
It adopts the single pump shell structure connected by clamp belt, which is a single-stage single suction cantilever
horizontal centrifugal pump.
Transport materials
This type of pump has a large overflow channel and is suitable for conveying gravel, mud and slag slurry with large
solid particles.
Applications
It is mainly used for the transportation of large particle
slurry commonly used in river sand dredgers and river
dredging dredgers. Also beneficiations, coal washing,
metal smelting,slag blasting and other processes.
www.kingslurrypump.com
ZG(H) Gravel Pump
Product Features
Flow passage componnts
Hard nickel, high chromium and other wear-resistant materials are adopted, which has good wear resistance,
corrosion resistance and high reliability
Transmission Mode
DCZ direct drive, CRZ parallel belt drive , ZVZ upper and
lower belt drive, CV belt drive.
Shaft seal mode
Packing Seal,Expeller Seal,Mechanical Seal,etc.
www.kingslurrypump.com
ZG(H) Gravel Pump
www.kingslurrypump.com
ZV(R) Submerged Slurry Pump
Product Features
Structure type
It is a vertical centrifugal slurry pump.
Transport materials
It’s suitable for conveying abrasive or corrosive slag slurry.
Applications
It is widely used in metallurgical, mining, coal, electric power, building materials, chemical and
other industrial departments. The submerged slurry pump is divided into
ZV type and ZVR type, with the same structure. ZV type submerged slurry pump, the flow passage parts
and shaft are made of wear-resistant metal, which is suitable for conveying abrasive slurry.
ZVR type rubber lined submerged slurry pump, the flow passage parts are lined with corrosion-resistant
rubber, which is suitable for conveying acidic or corrosive slurry.
The letter L contained in the model is the extended shaft series submerged slurry pump, which can be
applied to the working condition under deep water
www.kingslurrypump.com
ZV(R) Submerged Slurry Pump
Product Features
Transmission Mode
DC direct drive or BD belt drive can be adopted, and the
sheaves can be easily replaced
Installation and usage
It can work in the pool or pit without any shaft seal or shaft
seal water.
www.kingslurrypump.com
ZV(R) Submerged Slurry Pump
Anatomical drawing
www.kingslurrypump.com
ZHF(R) Foam Slurry Pump
Product Features
Structure type
Horizontal double pump casing structure is adopted.
Applications Transport materials
It is mainly used in metallurgy, mines, coal, chemical plants and flotation plants to
treat some corrosive slag slurry with large foam content. The pump can effectively
eliminate the foam in the slurry and is an ideal product for conveying foam slurry.
Product design
With the unique semi open foam guide impeller design, the
foam can be effectively introduced into the slurry pump,so
the viscous slurry can be treated more efficiently. The
enlarged high-efficiency front sheath can maximize the
inlet size and reduce the necessary NPSH.
www.kingslurrypump.com
ZHF(R) Foam Slurry Pump
Product Features
Transmission mode
DCZ direct drive, CRZ parallel belt drive , ZVZ upper and
lower belt drive, CV belt drive.
Flow passage components
The pump head structure is a double pump shell structure.
According to different transmission media, the overflow
parts can be made of metal or rubber materials.
Sealing mode
Packing seal, Expeller seal, Mechanical seal.
www.kingslurrypump.com
ZHF(R) Foam Slurry Pump
Anatomical drawing
www.kingslurrypump.com
ZF/QV Vertical Froth Pump
Product Features
Applications:
It is widely used in metallurgy, mining, coal, chemical and other industrial sectors.
It is suitable for conveying abrasive or corrosive slurry containing foam.
This series of pumps can effectively eliminate foam in the slurry during operation. It can still work normally in the case of
insufficient incoming materials, especially suitable for various flotation processes,
and it is an ideal product for conveying foam slurry.
www.kingslurrypump.com
ZF/QV Foam Slurry Pump
Structural Features
1. This type of pump is used in SP, SPR, PNL type bearing assemblies.
which can be directly driven or indirectly driven, and the pulley can be
easily replaced to change the speed of the pump to meet the Working conditions change.
2. The material box is made of steel structure or stainless steel, steel lined with rubber, etc.
It is equipped with a tangential feeding port and an overflow box. The overflow
box can easily send the excess incoming material back to the material pool,
and the tangential inlet can make the material quickly into the pump and
to the different conveying medium, the flow parts can be made of metal, rubber, or other non-metallic materials.
www.kingslurrypump.com
ZF/QV Vertical Foam Pump
Anatomical drawing
1.Frame Plate
2.Cover Plate
3.Cover Plate Liner Insert
4.Volute Liner
5.Impeller
6.Frame Plate Liner
7.Tank
8.Shaft
9.Bearing Box
www.kingslurrypump.com
ZJ Slurry Pump
Product Features
Structure type
ZJ/ZJL type slurry pump is a single-stage single-suction centrifugal slurry pump, inside and outside
the double shell structure, the pump shell vertical in open type, the outlet position can be rotated
by 45 degrees interval 8 different angle installation use.
Transported material
It is suitable for hydraulic ash removal in hydropower plants, metallurgical beneficiation slurry
transportation, coal slurry and heavy medium transportation in coal washing plants, etc.
Application
Widely used in metallurgy, coal, electric power, building materials and other industries.
Lining material
Abrasion resistant metal liners Abrasion resistant metal cross-flow parts
Drive type
Direct drive
www.kingslurrypump.com
ZJ Slurry Pump
Technical parameters
Outlet diameter (mm) 40~350
Head (H)
9.10~133.70
www.kingslurrypump.com
ZGB/ZGB(P) Slurry Pump
Product characteristics
Structure type
ZGBP/ZGB(P) type slurry pump is a horizontal, single-stage, single-suction, cantilever
centrifugal slurry pump
Conveying material
Containing corrosive or corrosive slurry, especially suitable for power plant ash slurry
conveying
Application scope
Metallurgy, mineral processing, mining, electric power, coal, building materials,
chemical industry, etc.
www.kingslurrypump.com
ZGB/ZGB(P) Slurry Pump
Lining material
Anti-abrasive metal lining Anti-abrasive metal overflow parts
Transmission mode
Direct transmission
Technical parameters
Pump outlet diameter (mm) 65~300
Flow rate (Q) 37.80~1631.90
Head (H) 25.40~95.50
www.kingslurrypump.com
IS series single-stage single-suction Centrifugal Water Pump
Performance parameters:
Suction diameter (mm): 50-300
Discharge diameter (mm): 32-250
Flow range (m³/h): 3.4-1200
Lift range (m): 3.7-133
With power (KW): 0.55-132
www.kingslurrypump.com
Double Suction Water Pump
Production type: SH
Application: Double suction pumps are used for pump stations.
Model meaning:
Model meaning: e.g.
10SH-13A(B)
10: The suction diameter is multiplied by 25 (that is, the suction diameter is 250mm)
SH: single stage double suction centrifugal pump
13: The specific revolution is multiplied by 10 (that is, the specific revolution is 130)
A: The first cut of the outer diameter of the impeller
B: The second cutting of the outer diameter of the impeller
Performance parameters:
Suction diameter (mm): 150-1200
Flow range (m³/h): 112-14400
Lift range (m): 6-140
With power (KW): 22-3450
www.kingslurrypump.com
Submersible Sewage Pump
Conveying material:
1. Urban sewage, industrial sewage, waste water, mixed water.
2. Surface water, raw water (river water containing solid and fibrous substances).
3. Untreated mud water, active sediment, industrial sediment.
4. Purified water
Application areas:
1. Drainage of buildings, ditches, dams, tunnels and land.
2. Pumping and discharging of raw water, mixed water, natural sewage and mud water.
3. Treatment and extraction of sewage sediment recycling fluid and garbage.
4. Pumping, irrigation and drainage, surface treatment, water source protection, water level
control in open-pit mining.
www.kingslurrypump.com
Submersible Sewage Pump
Performance parameters:
Discharge diameter (mm): 40-500
Flow (m³/h): 7-3000
Head (m): 5.6-46
With power (KW): 0.75-200
www.kingslurrypump.com
Submersible Slurry Pump
Applications:
This product is suitable for conveying slurry containing abrasive particles such as sand,cinder,tailings,etc. It is
mainly used in metallurgy, mining, electric power, chemical industry,environmental protection, river dredging,
sand pumping, municipal engineering and other industries. This product is easy to install and move, has high
slag extraction efficiency,and can run for a long time under harsh working conditions.
www.kingslurrypump.com
Submersible Slurry Pump
Applicable Conditions:
1. Power supply 380V, 50HZ (voltage and frequency can be customized according to requirements).
2. The temperature of the medium generally does not exceed 60℃, the PH value is 4-10, and the weight of the
medium is ≤1300kg/m³.
3. Suitable for medium with strong abrasive solid particles and mildly corrosive sewage slurry.
4. The diameter of the solids in the medium should not be larger than 80% of the minimum flow channel size
of the pump.
Performance parameters:
Discharge diameter (mm): 80-500
Flow (m³/h): 35-3000
Head (m): 5.7-44.5
With power (KW): 4-220
www.kingslurrypump.com
Pictures of Common Accessories
www.kingslurrypump.com
Pictures of Common Accessories
www.kingslurrypump.com
Pictures of Common Accessories
www.kingslurrypump.com
Pictures of Common Accessories
www.kingslurrypump.com
Pictures of Common Accessories
www.kingslurrypump.com
Pictures of Common Accessories
www.kingslurrypump.com
Pictures of Common Accessories
www.kingslurrypump.com
ZKing Workshop Pictures
www.kingslurrypump.com
Zking Industrial Pump Installation Pictures
www.kingslurrypump.com
www.kingslurrypump.com
Contact Us
+86-13903116635
Email
sales11@kingslurrypump.com
Web.
www.kingslurrypump.com
Add.
Northeast of Lingshou Economic Development
Zone,Shijiazhuang,Hebei,China
www.kingslurrypump.com
Thanks!
www.kingslurrypump.com