Professional Documents
Culture Documents
ECB AII0182 - C1 Mk3 To Mk4 Retrofit Kits - Overview
ECB AII0182 - C1 Mk3 To Mk4 Retrofit Kits - Overview
1. Subject
During the TSC 2003/2004 we have presented an overview of the different available retrofit kits.
Today a few things are updated resulting in next actual status.
Industrial Air division (AII) has released three kits for A, B and C controller.
Oil free Air division (AIF) has released one kit for D controller. This means for ZT37VSD you’ll have
to use the AIF kit.
The price is specially kept low to promote conversion of Mk3 units to Mk4 for integration in
compressor (CAN) networks. In generally a retrofit is more economical feasible then installing a
COMbox.
2. Actual kits
AII AIF
GA55-90C SF6-15
GA5-55C GAVSD ZR45-55 Z VSD
(except GA90VSD
<AII492000) ZT18-55
From Mk3: LRR HRRS HRRE HRRE
To Mk4: Mk4 II/A Mk4 II/B Mk4 III/C Mk4 III/D
Retrofit kit: 2902 0096 01 2902 0096 11* 2902 0096 21*** 2906 0595 01**
Installation
9820 4217 00 9820 4218 00 9820 4219 00 2946 0456 00
Guide:
FDP database: 1900 0712 26 1900 0712 26 1900 0712 26 1900 0712 26
* Note:
• Unfortunately, for GA90 VSD with serial nr < AII 492000 (SIMOVERT P) today there is no
retrofit possible because of the RS232 interface between Mk3 and the converter. (Mk4
uses RS485)
Our marketing and engineering are aware of this situation and are looking for a solution.
• For water cooled versions or if energy recovery installed, order extra expansion module
AIE1 1900 0710 41 together with one of next cables:
**Note:
***Note:
• For SF6-15, replace original temperature switch by temperature sensor (one per element)
5. Introduction date
Already effective.