Professional Documents
Culture Documents
Hyundai 220LCR LONG - REACH 2
Hyundai 220LCR LONG - REACH 2
Hyundai 220LCR LONG - REACH 2
SAE
J1995 (gross) 167 HP (124 kW) / 1,950 rpm COOLANT & LUBRICANT CAPACITY
J1349 (net) 157 HP (117 kW) / 1,950 rpm
Refilling liter US gal UK gal
6271/1 (gross) 169 PS (124 kW) / 1,950 rpm
DIN Fuel tank 400 105.7 88.0
6271/1 (net) 159 PS (117 kW) / 1,950 rpm
Engine coolant 35 9.2 7.7
Max. torque 74.7 kgf.m (540 lbf.ft) / 1,500 rpm
Engine oil 23.7 6.3 5.2
Bore x stroke 107 mm x 124 mm (4.2” x 4.9”)
Swing device 6 1.6 1.3
Piston displacement 6,700 cc (409 in3)
Final drive (each) 6 1.6 1.3
Batteries 2 x 12 V x 100 AH
Hydraulic system (including tank) 275 72.6 60.5
Starting motor 24 V; 4.8 kW
Hydraulic tank 160 42.3 35.2
Alternator 24 V, 95 Amp
* This engine meets the EPA (Tier 4 interim) / EU (Stage III-B) Emission regulation.
UNDERCARRIAGE
The X-leg type center frame is integrally welded with reinforced box-section track
HYDRAULIC SYSTEM frames. The undercarriage includes lubricated rollers, idlers, track adjusters with shock
absorbing springs and sprockets, and a track chain with double or triple grouser shoes.
MAIN PUMP
Type Two variable displacement axial piston pumps Center frame X - leg type
Max. flow 2 x 228.2 ℓ/min (60.3 US gpm/50.2 UK gpm) Track frame Pentagonal box type
Sub-pump for pilot circuit Gear pump No. of shoes on each side 49
Cross-sensing and fuel saving pump system No. of carrier rollers on each side 2
HYDRAULIC MOTORS No. of track rollers on each side 9
1
BUCKETS R220LC-9A / R220LC-9A LR / R220LC-9A H/W
All buckets are welded with high-strength steel.
0.51 (0.67) 0.80 (1.05) 1.10 (1.44) 1.34 (1.75) 0.74 (0.97) 0.87 (1.14) 0.75 (0.98) 0.52 (0.68)
0.92 (1.20) 1.20 (1.57) 0.90 (1.18) 1.20 (1.57)
SAE heaped m3 (yd3) 1.05 (1.37)
Recommendation m (ft.in)
Capacity m3 (yd3) Width mm (in)
Weight
5.68 (18’ 8”) Boom 8.2 (26’ 11”) Boom
Without With kg (lb)
SAE heaped CECE heaped
side cutters side cutters 2.0 (6’ 7”) Arm 2.4 (7’ 10”) Arm 2.92 (9’ 7”) Arm 3.9 (12’ 10”) Arm 6.3 (20’ 8”) Arm
0.51 (0.67) 0.45 (0.59) 700 (27.6) 820 (32.3) 570 (1,260)
0.80 (1.05) 0.70 (0.92) 1,000 (39.4) 1,120 (44.1) 700 (1,540)
0.92 (1.20) 0.80 (1.05) 1,150 (45.3) 1,270 (50.0) 770 (1,700)
1.10 (1.44) 0.96 (1.26) 1,320 (52.0) 1,440 (56.7) 830 (1,830)
1.20 (1.57) 1.00 (1.31) 1,400 (55.1) 1,520 (59.8) 850 (1,870)
1.34 (1.75) 1.15 (1.50) 1,550 (61.0) 1,670 (65.7) 920 (2,030)
0.74 (0.97) 0.65 (0.85) 985 (38.8) - 770 (1,700)
0.90 (1.18) 0.80 (1.05) 1,070 (42.1) - 810 (1,790)
1.05 (1.37) 0.92 (1.20) 1,290 (50.8) - 890 (1,960)
0.87 (1.14) 0.75 (0.98) 1,140 (44.9) - 900 (1,980)
1.20 (1.57) 1.00 (1.31) 1,410 (55.5) - 1,030 (2,270)
0.75 (0.98) 0.65 (0.85) 1,790 (70.5) - 880 (1,940)
0.52 (0.68) 0.45 (0.59) 935 (36.8) 1,035 (40.7) 460 (1,010)
Heavy-duty bucket Slope finishing bucket Applicable for materials with density of 2,000 kg/m3 (3,370 lb/yd3) or less
Heavy duty Rock-bucket Long reach bucket Applicable for materials with density of 1,600 kg/m3 (2,700 lb/yd3) or less
Applicable for materials with density of 1,100 kg/m3 (1,850 lb/yd3) or less
2
BUCKETS R220NLC-9A
All buckets are welded with high-strength steel.
0.51 (0.67) 0.80 (1.05) 1.10 (1.44) 1.34 (1.75) 0.74 (0.97) 0.87 (1.14) 0.75 (0.98)
0.87 (1.14) 1.20 (1.57) 0.90 (1.18)
0.92 (1.20) 1.05 (1.37)
SAE heaped m3 (yd3)
Recommendation m (ft.in)
Capacity m3 (yd3) Width mm (in)
Weight
5.65 (18’ 6”) Mono boom 5.65 (18’ 6”) Hydraulic adjustable boom
Without With kg (lb)
SAE heaped CECE heaped
side cutters side cutters 2.00 (6’ 7”) Arm 2.40 (7’ 10”) Arm 2.92 (9’ 7”) Arm 2.00 (6’ 7”) Arm 2.40 (7’ 10”) Arm
0.51 (0.67) 0.45 (0.59) 700 (27.6) 820 (32.3) 570 (1,260)
0.80 (1.05) 0.70 (0.92) 1,000 (39.4) 1,120 (44.1) 700 (1,540)
0.87 (1.14) 0.75 (0.98) 1,090 (42.9) 1,210 (47.6) 740 (1,630)
0.92 (1.20) 0.80 (1.05) 1,150 (45.3) 1,270 (50.0) 770 (1,700)
1.10 (1.44) 0.96 (1.26) 1,320 (52.0) 1,440 (56.7) 830 (1,830)
1.20 (1.57) 1.00 (1.31) 1,400 (55.1) 1,520 (59.8) 850 (1,870)
1.34 (1.75) 1.15 (1.50) 1,550 (61.0) 1,670 (65.7) 920 (2,030)
0.74 (0.97) 0.65 (0.85) 985 (38.8) - 770 (1,700)
0.90 (1.18) 0.80 (1.05) 1,070 (42.0) - 810 (1,790)
1.05 (1.37) 0.92 (1.20) 1,290 (50.8) - 890 (1,960)
0.87 (1.14) 0.75 (0.98) 1,140 (44.9) - 900 (1,980)
0.75 (0.98) 0.65 (0.85) 1,790 (70.5) - 880 (1,940)
Heavy-duty bucket : Applicable for materials with density of 2,000 kg/m3 (3,370 lb/yd3) or less
Heavy duty Rock-bucket : Applicable for materials with density of 1,600 kg/m3 (2,700 lb/yd3) or less
Slope finishing bucket : Applicable for materials with density of 1,100 kg/m3 (1,850 lb/yd3) or less
ATTACHMENT R220NLC-9A
Booms and arms are welded, a low-stress, full-box section design.
5.65 m (18’ 6”) mono boom, 5.65 m (18’ 6”) hydraulic adjustable boom and 2.00 m (6’ 7”); 2.40 m (7’ 10”) and 2.92 m (9’ 7”) arms are available.
3
Dimensions & Working Ranges
DIMENSIONS R220LC-9A / R220LC-9A LR
D Tail swing radius 2,840 (9’ 4”) 9,650 9,570 9,530 9,520 12,030
I Overall length
(31’ 8”) (31’ 5”) (31’ 3”) (31’ 3”) (39’ 6”)
D’ Rear-end length 2,770 (9’ 1”)
Overall height 3,200 3,110 3,030 3,480 3,280
J
E Overall width of upperstructure 2,740 (8’ 12”) of boom (10’ 6”) (10’ 2”) (9’ 11”) (11’ 5”) (10’ 9”)
F Overall height of cab 2,920 (9’ 7”) 600 700 800 900
K Track shoe width
480 (1’ 7”) (24”) (28”) (32”) (36”)
G Min. ground clearance
2,990 3,090 3,190 3,290
H Track gauge 2,390 (7’ 10”) L Overall width
(9’ 10”) (10’ 2”) (10’ 6”) (10’ 10”)
4
Dimensions & Working Ranges
DIMENSIONS R220NLC-9A
D (D') E
J F
C
G
A H
B K
I L
A Tumbler distance 3,650 (12’ 0”) Boom length 5,650 (18’ 6”)
B Overall length of crawler 4,440 (14’ 7”)
2,000 2,400 2,920
Arm length
C Ground clearance of counterweight 1,060 (3’ 6”) (6’ 7”) (7’ 10”) (9’ 7”)
9,650 9,570 9,510
D Tail swing radius 2,800 (9’ 2”) I Overall length
(31’ 8”) (31’ 5”) (31’ 2”)
D’ Rear-end length 2,770 (9’ 1”) Overall height 3,250 3,170 3,100
J of boom (10’ 8”) (10’ 5”) (10’ 2”)
E Overall width of upperstructure 2,530 (8’ 4”)
5
Dimensions & Working Ranges
DIMENSIONS R220NLC-9A - HYDRAULIC ADJUSTABLE BOOM
D (D') E
J
F
C
G
A H
B K
I L
mm (ft . in) mm (ft · in)
A Tumbler distance 3,650 (12’ 0”) Boom length 5,650 (18’ 6”)
B Overall length of crawler 4,440 (14’ 7”)
2,000 2,400
Arm length
C Ground clearance of counterweight 1,060 (3’ 6”) (6’ 7”) (7’ 10”)
9,620 9,550
D Tail swing radius 2,800 (9’ 2”) I Overall length
(31’ 7”) (31’ 4”)
D’ Rear-end length 2,770 (9’ 1”) Overall height 3,050 3,000
J of boom (10’ 0”) (9’ 10”)
E Overall width of upperstructure 2,530 (8’ 4”)
2,000 2,400
Arm length
(6’ 7”) (7’ 10”)
9,120 9,530
A Max. digging reach
(29’ 11”) (31’ 3”)
Max. digging 8,940 9,360
A’
reach on ground (29’ 4”) (30’ 9”)
5,480 5,890
B Max. digging depth
(17’ 12”) (19’ 4”)
Max. digging 5,360 5,770
B’
depth (8’ level) (17’ 7”) (18’ 11”)
Max. vertical wall 4,560 4,990
C
digging depth (14’ 12”) (16’ 4”)
10,300 10,670
D Max. digging height
(33’ 10”) (35’ 0”)
7,390 7,740
E Max. dumping height
(24’ 3”) (25’ 5”)
2,870 2,670
F Min. front swing radius
(9’ 5”) (8’ 9”)
6
Dimensions & Working Ranges
DIMENSIONS R220LC-9A HIGH WALKER
D Tail swing radius 2,840 (9’ 4”) 9,650 9,550 9,470 9,560
I Overall length
(31’ 8”) (31’ 4”) (31’ 1”) (31’ 4”)
D’ Rear-end length 2,770 (9’ 1”)
Overall height 3,290 3,170 3,060 3,450
J
E Overall width of upperstructure 2,740 (8’ 12”) of boom (10’ 10”) (10’ 5”) (10’ 0”) (11’ 4”)
F Overall height of cab 3,100 (10’ 2”) Type Triple grouser Double grouser
K Track shoe width
G Min. ground clearance 660 (2’ 2”) Width 600 (24”) 700 (28”) 800 (32”) 710 (28”)
3,395 3,495 3,595 3,505
H Track gauge 2,790 (9’ 2”) L Overall width
(11’ 2”) (11’ 6”) (11’ 10”) (11’ 6”)
7
Lifting Capacities
R220LC-9A Rating over-front Rating over-side or 360 degrees
Boom : 5.68 m (18’ 8”) / Arm : 2.0 m (6’ 7”) / Bucket : 0.92 m (1.20 yd ) SAE heaped / Shoe : 600 mm (24”) triple grouser
3 3
Ground
Line
Boom : 5.68 m (18’ 8”) / Arm : 2.40 m (7’ 10”) / Bucket : 0.92 m3 (1.20 yd3) SAE heaped / Shoe : 600 mm (24”) triple grouser
Load radius At max. reach
Load point
Capacity Reach
height
m (ft)
Ground
Line
Boom : 5.68 m (18’ 8”) / Arm : 2.92 m (9’ 7”) / Bucket : 0.92 m3 (1.20 yd3) SAE heaped / Shoe : 600 mm (24”) triple grouser
Load radius At max. reach
Load point
Capacity Reach
height
m (ft)
Ground
Line
1. Lifting capacity is based on SAE J1097, ISO 10567. 3. The load point is a hook located on the back of the bucket.
2. Lifting capacity of the Robex Series does not exceed 75% of the tipping load with 4. (*) indicates the load limited by hydraulic capacity.
the machine on firm, level ground or 87% of full hydraulic capacity.
8
Lifting Capacities
R220LC-9A Rating over-front Rating over-side or 360 degrees
Boom : 5.68 m (18’ 8”) / Arm : 3.90 m (12’ 10”) / Bucket : 0.92 m (1.20 yd ) SAE heaped / Shoe : 600 mm (24”) triple grouser
3 3
Ground
Line
Ground
Line
Boom : 5.68 m (18’ 8”) / Arm : 2.92 m (9’ 7”) / Bucket : 0.92 m3 (1.20 yd3) SAE heaped / Shoe : 600 mm (24”) triple grouser
Load radius At max. reach
Load point
Capacity Reach
height
m (ft)
Ground
Line
9
Lifting Capacities
R220LC-9A HIGH WALKER Rating over-front Rating over-side or 360 degrees
Boom : 5.68 m (18’ 8”) / Arm : 3.90 m (12’ 10”) / Bucket : 0.92 m (1.20 yd ) SAE heaped / Shoe : 600 mm (24”) triple grouser
3 3
Ground
Line
Boom : 5.68 m (18’ 8”) / Arm : 2.40 m (7’ 10”) / Bucket : 0.92 m3 (1.20 yd3) SAE heaped / Shoe : 800 mm (32”) triple grouser
Load radius At max. reach
Load point
Capacity Reach
height
m (ft)
Ground
Line
Boom : 5.68 m (18’ 8”) / Arm : 2.92 m (9’ 7”) / Bucket : 0.92 m3 (1.20 yd3) SAE heaped / Shoe : 800 mm (32”) triple grouser
Load radius At max. reach
Load point
Capacity Reach
height
m (ft)
Ground
Line
10
Lifting Capacities
R220LC-9A HIGH WALKER Rating over-front Rating over-side or 360 degrees
Boom : 5.68 m (18’ 8”) / Arm : 3.90 m (12’ 10”) / Bucket : 0.92 m (1.20 yd ) SAE heaped / Shoe : 600 mm (24”) triple grouser
3 3
Ground
Line
Ground
Line
1. Lifting capacity is based on SAE J1097, ISO 10567. 3. The load point is a hook located on the back of the bucket.
2. Lifting capacity of the Robex Series does not exceed 75% of the tipping load with 4. (*) indicates the load limited by hydraulic capacity.
the machine on firm, level ground or 87% of full hydraulic capacity.
11
Lifting Capacities
R220NLC-9A MONO BOOM Rating over-front Rating over-side or 360 degrees
Boom : 5.65 m (18’ 6”) / Arm : 2.00 m (6’ 7”) / Bucket : 0.87 m (1.14 yd ) SAE heaped / Shoe : 500 mm (20”) triple grouser
3 3
Ground
Line
Boom : 5.65 m (18’ 6”) / Arm : 2.40 m (7’ 10”) / Bucket : 0.87 m3 (1.14 yd3) SAE heaped / Shoe : 500 mm (20”) triple grouser
Load radius At max. reach
Load point
Capacity Reach
height
m (ft)
Ground
Line
Boom : 5.65 m (18’ 6”) / Arm : 2.92 m (9’ 7”) / Bucket : 0.87 m3 (1.14 yd3) SAE heaped / Shoe : 500 mm (20”) triple grouser
Load radius At max. reach
Load point
Capacity Reach
height
m (ft)
Ground
Line
1. Lifting capacity is based on SAE J1097, ISO 10567. 3. The load point is a hook located on the back of the bucket.
2. Lifting capacity of the Robex Series does not exceed 75% of the tipping load with 4. (*) indicates the load limited by hydraulic capacity.
the machine on firm, level ground or 87% of full hydraulic capacity.
12
Lifting Capacities
R220NLC-9A / HYDRAULIC ADJUSTABLE BOOM Rating over-front Rating over-side or 360 degrees
Boom : 5.65 m (18’ 6”) / Arm : 2.00 m (6’ 7”) / Bucket : 0.87 m (1.14 yd ) SAE heaped / Shoe : 500 mm (20”) triple grouser
3 3
Ground
Line
Boom : 5.65 m (18’ 6”) / Arm : 2.40 m (7’ 10”) / Bucket : 0.87 m3 (1.14 yd3) SAE heaped / Shoe : 500 mm (20”) triple grouser
Load radius At max. reach
Load point
Capacity Reach
height
m (ft)
Ground
Line
1. Lifting capacity is based on SAE J1097, ISO 10567. 3. The load point is a hook located on the back of the bucket.
2. Lifting capacity of the Robex Series does not exceed 75% of the tipping load with 4. (*) indicates the load limited by hydraulic capacity.
the machine on firm, level ground or 87% of full hydraulic capacity.
13
STANDARD EQUIPMENT R220LC-9A / R220NLC-9A
ISO Standard cabin Boom
All-weather steel cab with 360° visibility 5.68 m; 18’ 8”
Safety glass windows Arm
Rise-up type windshield wiper 2.92 m; 9’ 7”
Sliding fold-in front window Cabin ROPS (ISO 12117-2)
Sliding side window (LH) ROPS (Roll Over Protective Structure)
One key fits all lockable doors Hi-mate (Remote Management System)
Hot & cool box
Storage compartment & Ashtray
Radio / MP3 Player with remote control and USB-input
Handsfree mobile phone system with USB-charging device
Transparent cabin roof-cover
OPTIONAL EQUIPMENT R220LC-9A / R220NLC-9A
12 volt power outlet (24V DC to 12V DC converter) Beacon lamp
Sun visor Safety lock valve for arm cylinder
Rain guard - front window
Single-acting piping kit (breaker, etc.)
Computer aided power optimization (CAPO) system
Quick coupler
3-power modes, 2-work modes, User mode
Boom - R220LC-9A
Auto & one-touch deceleration system
Auto warm-up system 5.68 m; 18’ 8” - Heavy duty
Overheat prevention system 8.2 m; 26’ 11” - Long reach
Automatic temperature control Boom - R220NLC-9A
Air conditioner & heater 5.65 m; 18’ 6”
Defroster 5.65 m; 18’ 6” - hydraulic adjustable
Self-diagnostics system Arm - R220LC-9A
Starting Aid (air grid heater) for cold weather 2.0 m; 6’ 7”
2.4 m; 7’ 10”
Centralized monitoring
2.92 m; 9’ 7” Heavy duty
LCD display
3.9 m; 12’ 10”
Engine speed or Trip meter
6.3 m, 20’ 8” Long reach
Clock
Arm - R220NLC-9A
Gauges
2.0 m; 6’ 7”
- Fuel level gauge
2.4 m; 7’ 10”
- Engine coolant temperature gauge
2.92 m; 9’ 7” - not for hydraulic adjustable boom
- Hyd. oil temperature gauge
Cabin FOPS/FOG (ISO/DIS 10262 Level II)
Warning lamps
- Engine warning FOPS (Falling Object Protective Structure)
- Overload FOG (Falling Object Guard)
- Communication error Cabin guard front
- Low battery Wire net
- Air filter clogging Fine net
Indicators Cabin roof-steel cover
- Max power Cabin lights
- Low speed/High speed Track shoes - R220LC-9A
- Fuel warmer Triple grousers shoe (700 mm; 28”)
- Auto deceleration Triple grousers shoe (800 mm; 32”)
Rearview camera Triple grousers shoe (900 mm; 36”)
Door and cab locks, one key Double grousers shoe (700 mm; 28”)
Three outside rearview mirrors Full track rail guard (High walker only)
Mechanical suspension seat with heater Track shoes - R220NLC-9A
Adjustable joysticks Triple grousers shoe (500 mm; 20” )
Console box tilting system Triple grousers shoe (600 mm; 25” )
Four front working lights Triple grousers shoe (700 mm; 28” )
Additional lower frame - reinforced under cover
Electric horn
Seat
Batteries (2 x 12V x 100 AH)
Adjustable air suspension seat
Battery master switch
Adjustable air suspension seat with heater
Removable clean-out screen for coolers
Mechanical suspension seat
Automatic swing brake Pattern change valve (2 patterns)
Fuel pre-filter with fuel warmer Air compressor
Boom holding system
Arm holding system
Track shoes (600 mm; 24”)
Track rail guard
Accumulator for lowering work equipment
Lower frame under cover
Viscous fan clutch * Standard and optional equipment may vary. Contact your Hyundai dealer for more
Fuel filler pump (50 ℓ/min) information. The machine may vary according to international standards.
Safety lock valve for boom cylinder with overload warning device * The photos may include attachments and optional equipment that are not available
Double-acting piping kit (clamshell, etc.) in your area.
* Materials and specifications are subject to change without advance notice.
Travel alarm
* All imperial measurements rounded off to the nearest pound or inch.
PLEASE CONTACT