Professional Documents
Culture Documents
MITSUBISHI OUTLANDER Back Warning System Tow Mode
MITSUBISHI OUTLANDER Back Warning System Tow Mode
SENSOR SYSTEM
Shift the gear to the "R" (reverse) position and press and hold the sonar switch for 3
seconds. The standard mode can, therefore, be switched to the towing bar mode.
BUZZER DURATION
The buzzer sound of the corner sensor/back sensors is the same. The buzzer in the
corner sensor/back sensor-ECU sounds based on the closer alarm cycle having a
higher priority.
Distance between back sensor and Buzzer duration
obstacles The standard The towing bar
mode mode
Less than approximately 40 cm Buzzer: OFF
Approximately 40 to 60 cm
Approximately 60 to 80 cm
Approximately 80 to 100 cm
Approximately 25 to 40 cm
Approximately 40 to 50 cm
FAIL-SAFE FUNCTION
1. When the ultrasonic noise is received, the bass toned buzzer sound
continuously. When the ultrasonic noise stops, the normal operation will be
resumed immediately.
2. When the abnormality such as the open circuit of a sensor occurs, the sensor
turns OFF and the high toned buzzer sounds for 5 seconds. When the normal
signal is received, the normal state will be resumed.
3. When an abnormality occurs in the system, the reversing sensor indicator
keeps flashing with 0.8-second interval until the system returns to the normal
condition. However, if the system is turned OFF by using the switch, the
indicator stops its flashing.