Professional Documents
Culture Documents
9450 Promocoding Feature
9450 Promocoding Feature
Set the printer in the Production Settings Factory after the firmware installation, (or if done
later on, printer has to be shut down to validate the setting modification).
Note 1: this selection case allows the operator to use the promotion coding in stand-alone mode. If
not activated, the promotion coding can be used in V24 mode.
Note 2: when this feature is activated, the non-double printing option is automatically activated as
well. (Could be de-activated in case of regular print job)
Message creation
Create a message in order to use the feature “Unique coding standalone” following
instruction here below:
Same name has to be used for the job/message and data files:
Message name = file name.X (For eg: BOND.mim = Bond.1)
On the user interface, a new icon allows the operator to insert a unique variable code. The max
length is 20 characters and only one unique code can be inserted in the message.
Running method
1. Plug the USB key in the printer.
2. Once the USB key is connected, a logo appears on the display screen and the message can
be selected to be in production.
3. The printer automatically stores data into the queue and these data are pulled one at a time
like a FIFO at each Dtop signal.
4. Once the file is completed, the file is deleted and a new one will be used to transfer data in
the queue.
If the printer is put in pause mode, data are saved and are still in the queue.
If the printer is stopped (still on the main), data are saved and are still in the queue.
This is printing correctly with trigger from trig sensor and not with Test print.
The 1St line called “ExtVar21” is case sensitive. It is necessary to respect each character case.