Professional Documents
Culture Documents
Format Mini Project - I B.tech 3rd Sem
Format Mini Project - I B.tech 3rd Sem
on
TITLE OF PROJECT
Under Guidance of :
Name of Supervisor
I/ we the undersigned solemnly declare that the project report titled <Title of the Report> is based
on our own work carried out during the course of our study under the supervision of <Name of the
supervisor/s>.
I/we assert that the statements made and conclusions drawn are an outcome of our work. We
further certify that
i. The work contained in the report is original and has been done by us under the general
supervision of oursupervisor(s).
ii. I/ we have followed the guidelines provided by the University in writing the report.
iii. Whenever I/we have used materials (data, theoretical analysis, and text) from other sources,
I/ we have given due credit to them by citing them in the text of the report and giving their
details in the references.
This is to certify that the work incorporated in the project report entitled <Title of the Report> is a
record of work carried out by <Name of the student> bearing Enrollment No.: ……….. , under
my/our guidance and supervision as a fulfillment of a curriculum of autonomous course in B.Tech
3rd semester in the Faculty of Department of Electrical Engineering of Bhilai Institute of
Technology, Durg (CG).
This is to certify that the project report entitled <Title of the Report> which is submitted by
1. <Name of the students>, Roll No.: <Roll no. of the students>, Enrollment No.:<
Enrollment Nos.>
2. <Name of the students>, Roll No.: <Roll no. of the students>, Enrollment No.:<
Enrollment Nos.>
3. <Name of the students>, Roll No.: <Roll no. of the students>, Enrollment No.:<
Enrollment Nos.>
4. <Name of the students>, Roll No.: <Roll no. of the students>, Enrollment No.:<
Enrollment Nos.>
has been examined by the undersigned as a part of the examination for the fulfillment of a
curriculum of autonomous course in B.Tech 3rd semester in the faculty of Department of Electrical
Engineering of Bhilai Institute of Technology, Durg (CG).
The exclusivity of this project cannot be claimed as a singular effort, for several persons have
contributed to the accomplishment of this project report. We heavily offer our profound regard to
all, as without their generous guidance this work, would never have been completed. As it is
impossible to include all, some of the prominent names are mentioned at appropriate places.
We express our deepest regard to Dr. Arun Arora, Director BIT Durg, Dr. Mohan Gupta,
Principal BIT Durg, Dr. (Mrs.) Manisha Sharma,Vice-Principal BIT Durg and Dr. S.P. Shukla,
HOD Electrical Engineering BIT Durg for providing us necessary permission and creating an
excellent facility to carry out our team project during B.Tech (3rd Semester). We are equally
grateful to our project guide <Name of Supervisor>(<Designation>), Department of Electrical
Engg.) for extending his support. Our deepest sense of gratitude to our department for their support
and guidance. We also take this opportunity to thank our institution, entire faculty member and
entire supporting staffs for their kind help and support without whom this project would haven’t
been possible.
Chapter -1 Introduction 1- 8
1.1 Introduction ……………1
1.2 Objective ……………7
Chapter-2 Methodology 9-12
2.1 Principle ……………9
2.2 Flow chart ……………12
Chapter -3 Implementation 13-20
3.1 Circuit diagram ……………13
3.2 Explanation of each components ……………14
3.2.1 Resistor ……………14
3.2.2 Transformer ……………16
3.3 Working ……………18
Chapter -4 Result 21-23
4.1 Observation ……………21
4.2 Result ……………22
Chapter-5 Conclusion 24-25
5.1 Conclusion ……………24
5.2 Future scope ……………24
Reference 26-30
List of Tables
Introduction
Table 1.1 List of Components ( Font size 10)
Table 1.1
In labelling 1 before decimal point indicate chapter number and 1
after decimal point indicates table number so labeling all figure of
chapter 1 will be like Table 1.1 , Table 1.2, Table 1.3 …..
Figure1.1
In labelling 1before decimal point indicate chapter number and 1
after decimal point indicates figure number so labeling all figure
of chapter 1 will be like Figure1.1 , Figure1.2, Figure1.3 …..
Page Number will begin from Chapter 1 where Introduction
begins and must be mentioned at Right -bottom
Chapter-2
Methodology
Chapter-3
Implementation
Chapter-4
Result
Chapter-5
Conclusion
References
Books
Electronics Devices and Circuits by Sallivahanan , Chapter -2 ,Semiconductors ,page 43-49
Research Paper
M. Thomas (2019), “ review of semiconductors devices for rectifiers” in International journal of
Advance Engineeringand technology ,
Website
www.electronicsforyou.com