Professional Documents
Culture Documents
Connection Establishment
Connection Establishment
Contents
1 Library Information
1.1 Library Overview
1.2 Library Changes
1 Library Information
Library Overview
This section describes the descriptions and intended audience of all the documents in the
library. It also defines the intended audience.
Library Changes
This document describes the changes in the library.
This section describes the descriptions and intended audience of all the documents in the library. It
also defines the intended audience.
Library Structure
Huawei
equipment.
Description DBS3900 LTE TDD Product Description This document System engine
describes the
DBS3900 LTE
TDD in terms
of benefits,
architecture,
installation
scenarios,
operation and
maintenance,
typical
configurations,
and technical
specifications.
eNodeB and
the following
information
about the
eNodeB: the
position on the
network,
functions,
system logical
structure,
system
monitoring
schemes, clock
synchronization
modes,
operation and
maintenance,
reliability,
topologies and
typical
hardware
configurations.
System
engineer
Site
maintena
engineer
APM30H & TMC11H & IBBS200D & IBBS200T This document eNodeB
(Ver.C) Product Description describes the installatio
configurations, engineer
functions, and
System
specifications
engineer
of the boards
Site
and modules in
maintena
APM30H
engineer
Ver.C,
TMC11H
Ver.C,
IBBS200D
Ver.C, and
IBBS200T
Ver.C. It also
describes the
classification of
cables,
specifications
of connectors,
and installation
positions of
cables.
Site
maintena
engineer
APM30H & TMC11H & IBBS200D & IBBS200T This document eNodeB
(Ver.B) User Guide describes the installatio
functions, engineer
specifications,
System
hardware, and
engineer
cables of the
APM30H,
TMC11H,
Table 1 Introduction to the library structure
also describes
optional
sensors.
software,
downloading
the data
configuration
file, checking
the hardware
status, and the
running status
of the eNodeB.
Operation and General eNodeB LMT User Guide This document Network
Maintenance describes the planning
installation and engineer
operation of the
Field
eNodeB LMT in
engineer
terms of
System
software
engineer
applications,
installation, Network
of the
meanings,
value ranges,
and calculation
methods.
causes, and
the
troubleshooting
procedure of
eNodeB event
alarms.
Table 1 Introduction to the library structure
DBS3900 base
stations.
Intended Audience
Network The network planners fall into three categories: MOM User Guide
planning
Radio network planning engineers are MO Reference
engineers
responsible for network planning according to MML Reference
network requirements, geographical
Alarm Reference
conditions, and RF environment, for
Counter Reference
Table 2 Definition of the intended audience
Field Field engineers are responsible for commissioning LMT User Guide
engineers the software of the base stations, for configuring
Commissioning Guide
the initial data of the base stations and for
Initial Configuration
checking the functions of the base stations.
MOM User Guide
MO Reference
MML Reference
Alarm Reference
Communication Matrix
Alarm Reference
Counter Reference
Parameter Reference
Performance Monitoring
Reference
Communication Matrix
Network Network shifts are responsible for routing jobs such LMT User Guide
shifts as monitoring alarms, collecting KPI data, checking
MO Reference
partition and space on hard disks, monitoring logs,
MOM User Guide
and backing up daily data. Upon any unsolvable
faults, they inform the related personnel for MML Reference
Network Network operators are responsible for the system LMT User Guide
operators reconfiguration process according to data collected
Communication Matrix
from network planning and network performance
analysis.
Draft A (2011-07-15)
Compared with issue 04 of V100R003C00 (2011-06-10), the draft incorporates the following
documents:
Document Description
LTE TDD RRU Description This document describes the LTE TDD RRU in
terms of exterior, ports, and technical
specifications.
APM30H & TMC11H & IBBS200D & IBBS200T This document describes the configurations,
(Ver.C) Product Description functions, and specifications of the boards and
modules in APM30H Ver.C, TMC11H Ver.C,
IBBS200D Ver.C, and IBBS200T Ver.C. It also
describes the classification of cables,
specifications of connectors, and installation
positions of cables.
DBS3900 (Ver.C) Installation Guide This document describes the procedure for
installing a DBS3900 (Ver.C).
Modified documents
Compared with issue 04 of V100R003C00 (2011-06-10), this documentation incorporates certain
changes. For details on the change in each document, see the corresponding change document.
Deleted documents
Compared with issue 04 of V100R003C00 (2011-06-10), the draft deletes the following documents:
APM30H & TMC11H & IBBS200D & IBBS200T (Ver.B) Installation Guide