Professional Documents
Culture Documents
Abloy Dc240 Data Sheet 1
Abloy Dc240 Data Sheet 1
com
ABLOY® DC240
Rack & pinion door closer for professional use
Product description
DC240 door closer can be used with height-adjustable sliding rail or standard arm.
Suitable for external and internal doors.
Overview of Advantages
• CE certified with sliding arm and standard arm
• Adjustable closing force size EN 1-4 (DC240DA: EN 2-4) with sliding arm according EN 1154
• Adjustable closing force size EN 2-6 with standard arm according EN 1154
• Back check (BC) as a standard feature
• Delayed action (DA) as an option
• Operating temperature range: -35°C...+45°C
• Adjustable latching and back check starting angle by grooved spindle
• Easy adjustment of arm height (14 mm)
• Two pressure relief valves to protect against overload
• Maximum door weight 120 kg and door width 1400 mm with standard arm installation
• Maximum door weight 80 kg and door width 1100 mm with sliding arm installation
• Easy to install
Sliding arm DC195 Standard arm DC190 Hold-open standard arm DC191
• With protective cover • Opening angle up to 180° • Hold-open angle adjustable up
• Concealed fastening • Detachable joint to 120°
screws Standard arm DC199 • Hold-open mode can be enabled
• 2 mm height • Can be used with fire doors and disabled as required
adjustment • Locked joint • Cannot be used with fire and
smoke protection doors
506 mm
Technical data
23 mm
DC240 variable adjustable closing force EN 2-6 (Standard arm)
111 - 125 mm EN 1-4 (Sliding rail)
71 mm DC240DA variable adjustable closing force EN 2-4 (Sliding rail)
66 mm
305 mm Door width up to (standard arm / sliding rail ) 1400mm / 1100mm
Fire and smoke protection Yes
Door swing directions Left/right handed
Mounting method (standard arm) Standard installation, hinge side and
frame installation, non-hinge side
Mounting method (sliding rail) Standard and frame installation, hinge
side and frame installation, non-hinge
side.
71 mm Closing speed Variable between 180°- 15°
Latching speed Variable between 15°-0°
305 mm 66 mm
Backcheck Variable above 75°
Delayed action Variable between 180°-70°
Opening angle, hinge side (standard arm and sli- ca. 180°
ding rail)
Opening angle, non-hinge side (standard arm) 120°-180°
Opening angle, non-hinge side (sliding rail) ca. 120°
Door closer weight 2.1kg
Certificate number (DC240) 0432-CPR-00008-03
Certificate number (DC240DA) 1121-CPR-AD5240
CE marking for building products Yes
Basic colours (door closer, arm) White (RAL 9016), Silver (EV1),
Painted brass, Brown (RAL 8014), Black
(RAL 9005), Customised finish
Metal covers Stainless steel
This content is protected by Intellectual Property Rights Laws. The title to the content shall not pass to you, and instead shall remain with Abloy Oy or a third party holding the title. Abloy develops
continuously the products and solutions offered. Therefore, the information contained in the document is subject to change without notice. ABLOY PROVIDES THIS CONTENT ON AN “AS IS” BASIS
WITHOUT ANY WARRANTIES OF ANY KIND, EXPRESS, IMPLIED, OR STATUTORY.”
Abloy Oy Wahlforssinkatu 20 P.O. Box 108 FI-80101 Joensuu, Finland | Tel. +358 20 599 2501 | abloy.com
ABLOY® DC240
Rack & pinion door closer for professional use
Accessories
Ø 6,5
6.5
25,4
58
M5
M5
Opening damber DC153
Mounting plate DC115 for sliding arms
485
4 8 5 15
1 5
Ø6 6
0 9
0 3
3 2
9
30
23
5
5 1 5
515
Ø 5.5
Parallel arm bracket for Angle bracket DC104 for sliding arms
DC190/DC191/DC199
5
30
5518
81 30
øØ 6.556 .
80
Installation
92
45 506
92-106
85
x. 15
ma
111-125
0
x. 1
ma
max. 100 (DC 190, DC 199)
max. 70 (DC 191)
506 11 92
111 -125
92 506
x. 3
ma
0
x. 6
ma
This content is protected by Intellectual Property Rights Laws. The title to the content shall not pass to you, and instead shall remain with Abloy Oy or a third party holding the title. Abloy develops
continuously the products and solutions offered. Therefore, the information contained in the document is subject to change without notice. ABLOY PROVIDES THIS CONTENT ON AN “AS IS” BASIS
WITHOUT ANY WARRANTIES OF ANY KIND, EXPRESS, IMPLIED, OR STATUTORY.”