Professional Documents
Culture Documents
Installation Mannual DM500 Remote Video Interface
Installation Mannual DM500 Remote Video Interface
Installation Mannual DM500 Remote Video Interface
Revision record
Version Date Description
1.0 September 2006 Original issue of document
1.1 April 2007 Minor revision
Contents
3 INSTALLATION........................................................................................................6
3.1 RVI ............................................................................................................................6
3.2 Dimensions ...............................................................................................................6
3.3 Earth stud..................................................................................................................6
3.4 Power requirements ..................................................................................................6
3.5 Video interface ..........................................................................................................7
3.5.1 Signal levels.......................................................................................................7
4 CONFIGURATION....................................................................................................8
1.1 References
9200238 Installation manual for DM300 S-VDR and DM500 VDR
9200327 Installation manual for DM500 VDR Sensor Interface Unit
9200328 Operators Manual for DM300 S-VDR and DM500 VDR
9200331 Installation manual for DM300 and DM500 Remote Video Interface
9200343 Inspectors and Authorities Manual for DM300 S-VDR and DM500 VDR
2 System overview
RS-422 DAU
BAU Power
Firewire
STP CAT5 Capsule
BMU
BMU
BMU
BMU
BMU
BMU Ethernet STP CAT5
6 x BMU
SIU
(2) x Radar
3 Installation
3.1 RVI
The SIU must be installed on a bulkhead or surface, which can easily carry the weight (2,0Kg / 4
lbs) of the RVI. The RVI must be protected from rain and seawater and direct sunlight. Consult
“Appendix A Installation drawing for RVI” for details.
Warning: Do not install the RVI in a small compartment with insufficient ventilation
3.2 Dimensions
W x H x D 180 x 82 x 270mm
Weight 2,0Kg / 4 lbs
See also “Appendix A Installation drawing for RVI”.
The video interface is compatible with the VGA/VESA family. Separate sync (5-way) and sync on
green (composite) are supported.
4 Configuration
The two video inputs on the RVI are configured the same way as the video inputs on the DPU/DAU