Professional Documents
Culture Documents
Dvukhvintovye Nasosy Houttuin Serii 231.50 Prospekt Na Angliyskom Yazyke
Dvukhvintovye Nasosy Houttuin Serii 231.50 Prospekt Na Angliyskom Yazyke
PRODUCTS
WATER
SEAWATER
OILS
LIGHT PRODUCTS
CHEMICALS
LABELLING
CARGO PUMPS
TRANSFER PUMPS
BILGE/BALLAST PUMPS
STRIPPING PUMPS
TRIM PUMPS
FIREFIGHTING PUMPS
Principle Products
The Houttuin double entry twin screw pumps Water
series 231 are vertical rotating self priming Seawater
positive displacement pumps. Oils
Two inter-meshing screws rotating in a pump Heavy fuel oils
casing insert ensure high pumping efficiency Light products
with constant axial flow and unequalled Chemicals
suction power.
Labelling
Construction Cargo pumps
The spindles are supported and axially held in Transfer pumps
position by ball bearings. The transmission of Bilge/ballast pumps
torque from the driven spindle to the idler Stripping pumps
spindle is effected by oil lubricated timing Trim pumps
gears located outside of the pumping area in Cooling water pump
an attached gearbox. The ball bearings and Firefighting pumps
timing gears maintain a small clearance General service pumps
between the screws, thus preventing metal
to metal contact. Performance data
3
Capacity Q up to 535 m /h
Shaft sealing Viscosity range V 0,6 to 5000 cSt
In standard design the pump is fitted with Temperature of
o
single unbalanced mechanical seals, with pumped liquid t up to 140 C
fluid chamber if required. Inlet pressure ps up to 10 bar
Outlet pressure pd up to 16 bar
Overload protection Difference
For protection against overload a built-on pressure ∆p up to 16 bar
spring loaded relief valve can be supplied. Speed n up to 2900 rpm
Flanges according to DIN or ANSI
Applications
For pumping contaminated or slightly abrasive, A preliminary pump selection can be effected
lubricating and non-lubricating liquids of low by means of the performance graphs. For the
or high viscosity which do not chemically exact performance data as function of the
attack the pump materials ( corrosion proof viscosity of the liquid to be pumped and the
materials can be offered).In the chemical and pump speed, please refer to the individual
petro-chemical industry, soap and grease characteristics.
industry, paint and lacquer industry, food and
beverage industry, plastics industry, sugar
industry, environmental technology, in the
shipbuilding industry.
Screw shafts Casing insert Casing Covers Seal faces Springs ‘O’ -rings
- Carbon Steel - Cast Iron - Cast Iron - Cast Iron - Chrome Steel or - Stainless - Viton
- Carbon Steel - Nodular - Nodular - Cast Iron - Silicon Carbide Steel - Teflon
- Stainless Steel Cast Iron Cast Iron with coating against (Type 300)
(Type 400) - Ni-Resist - Ni-Resist - Carbon
- Stainless Steel - Bronze - Cast Iron
(Type 300) with coating
- Bronze
1
SERIES 231.50 PERFORMANCE GRAPHS
2
SERIES 231.50 CONSTRUCTION
3
SERIES 231.50 DIMENSIONS
Hole pattern of
pump foot Discharge- and
suction flange
HOUTTUIN B.V.
Sophialaan 4, 3542 AR Utrecht
The Netherlands
P.O. Box 76, 3500 AB Utrecht
The Netherlands
Phone 31 - (0)30 - 2484611
Telefax 31 - (0)30 - 2411845
Telex 47280
Internet http://www.allweiler.de