Download as pdf or txt
Download as pdf or txt
You are on page 1of 4

QUALITY, HEALTH, SAFETY & ENVIRONMENT

ENHANCING RESILIENCY
DELIVERING COMPLIANCE

OMMS Resiliency Consultancy Services, is a business established


for all clientele whether it’s Micro, Small, Medium, Large or Multi-
National business conglomerates. Its main goal is to help businesses
comply with Quality, Health, Safety and Environmental (QHSE)
requirements in a form of Consultancy, Training, Assessment, Audit
and assistance on Testing with affiliated laboratories.
HEALTH & SAFETY EHS PROJECTS CONSULTANCY COMPLIANCE
AUDIT & INSPECTION SITE MANAGEMENT QUALITY QHSE SET-UP
• CONSTRUCTION AUDIT • EHS CONSTRUCTION SITE • ISO 9001:2015 – QMS • OSH DOLE REQUIEMENT –
• LEGAL COMPLIANCE OSH MANAGEMENT • ISO 14001:2015 – EMS COMPLIANCE & DUE
AUDIT • EXISTING SITE EHS • ISO 45001:2018 – OHSMS DILLIGENCE
• HAZARD OPERABILITY MANAGEMENT • ISO 31001:2018 – Risk • QHSE SYSTEM
STUDY (HAZOP) Management Adoption CONSULTANCY FROM GAP
• ISO 22301:2019 – BCM TO ESTABLISHMENT TO
• ISO 17025:2017 – Testing IMPLEMENTATION
and Calibration • OSH LAW (RA 11058)
• Others SYSTEM IMPLEMENTATION

ASSESSMENT & AUDITS PERMITTING TEST & MEASUREMENTS TRAININGS


ADVANCE LEARNING

• FIRE RISK ASSESSMENT • PERMIT TO OPERATE • WORK ENVIRONMENT • ISO 9001:2015 AWARENESS
• ASBESTOS RISK ASSESSMENT ASSISTANTCE (E.G MEASUREMENT – DOLE • ISO 14001:2015 AWARENESS
• LEGIONELLA RISK PRESSURE VESSEL, ACCREDITTED (SOON) • ISO 45001:2018 AWARENESS
ASSESSMENT INTERNAL COMBUSTION • INDOOR AIR QUALITY • ISO INTERNAL AUDIT
• WORKPLACE NOISE & OTHER ENGINE, ELEVATOR, • FIT TESTING COMPLIANCE • ISO 31000:2018 COURSE
INDUSTRIAL HYGIENE MANLIFT, DUMBWAITER, • POTABLE WATER TESTING • ERGONOMICS
PARAMETER MAPPING HOIST & BOILERS) • WASTE WATER TESTING • HIRADC & JHA TRAINING
• ENVIRONMENTAL IMPACT • ENVIRONMENTAL • ASBESTOS AWARENESS
ASSESSMENT (EIA) PERMITTING • DO 13: 8 HOURS
• ENVIRONMENTAL SITE REQUIREMENTS SUCH AS: CONSTRUCTION SAFETY
ASSESSMENT (PHASE I AND  DENR permit to operate WORK AT HEIGHT
PHASE II)  DENR discharge permit • CONFINED SPACE
• ENVIRONMENTAL  Environmental Compliance • INDUSTRIAL HYGIENE
COMPLIANCE AUDIT Certificate (ECC) • MESH – RA 11058
• ENVIRONMENTAL DUE  Certificate of Non-Coverage • BOSH – thru partner STO
DILIGENCE  Preparation of Self-Monitoring • COSH – thru partner STO
• ENERGY AUDIT – DOE Report (SMR) • LCM – thru partner STO
Requirement  Preparation of Compliance • OFFICE SAFETY
• INTERNAL ISO AUDITS Monitoring Report (CMR) • LABORATORY SAFETY
• MANAGEMENT REVIEW • HOT WORKS
• LIFTING INSPECTION • PERMIT TO WORK SYSTEM
• CUSTOMIZED TRAININGS

CONTACT U
CONTACT US
Orville Mancilla (QHSE Consultant)
Traville18@gmail.com
0991 215 5620
LATEST UPDATE ON THE NEWEST &
TRENDING LEGAL REQUIREMENTS
TOP 1: ENERGY AUDIT REQUIREMENT BY RA 11285
 Type 1 designated establishments are those with an annual energy consumption of 500,000
kilowatt-hours (kWh) to 4,000,000 kWh for the previous year; and
 Type 2 designated establishments are those with an annual energy consumption of more than
4,000,000 kWh for the previous year.

Requirement: “Pursuant to item III – 6 of MC2020-05-0001, all Type 1 and Type 2 DEs shall
conduct an energy audit once every three (3) years by engaging a Certified Energy Auditor (CEA)
or an Energy Service Company (ESCO) and Submit the Energy Audit Report to the DOE upon
completion of the energy audit.

TOP 2: COMPLIANCE TO RA 11058 OSH LAW


Critical Requirements:
 DOLE Registration (Rule 1020)
 Submission of OSH Program
 Submission of Monthly Minutes of the Meeting (Quarterly Submission)
 Appointment of Safety Officers, First Aider, and Occupational Health Practitioner
 Incident Report, Report of Safety Committee and Medical Report Submission
 Periodic conduct of Mandatory Eight Hours Training for Workers (MESH)
 Annual Conduct of Work Environment Measurement
 Others

OMMS will be your trusted consulting partner that will guide and assist you in every moment
toward sustainability and achieving compliance for your organization. Contact us..
LATEST UPDATE ON THE NEWEST &
TRENDING LEGAL REQUIREMENTS
TOP 3: FIRE RISK ASSESSMENT (FRA)
A Fire Risk Assessment is a tool to identify potential fire hazards and enable actions to be taken to
remove or reduce these hazards to as low a level as practically possible and then decide what physical
fire precautions and management arrangements are necessary to ensure people's safety. This service is a
usual requirement for multinational companies with a wide spectrum of clients to ensure that fire risk are
within the As Low As Reasonably Practicable (ALARP) status.

Prerequisite: With the recent revision for the Republic Act 9514:2008 The Fire Code of the Philippines,
the Fire Risk Assessment is a methods the review most of the fire safety installation and how the
establishment implement its protocol which is mostly a requirement of Fire Safety Maintenance Report
(FSMR). FRA can help in facilitating the FSMR.

TOP 4: 3rd PARTY CONSTRUCTION & HEAVY LIFTING INSPECTION


Critical Requirements:
 Technical Inspection & Load Testing of construction Heavy Equipment & Industrial Lifting Equipment
for land, sea and air industries in the Philippines is a compliance to DOLE Occupational Safety &
Health Standards, OSHS Rule 1220. The DOLE Department Order # 13 known as the “Guidelines
Governing Occupational Safety and Health in The Construction Industry” Section 10 of Department
Order No. 13, series of 1998, mandates that: “All heavy equipment must be tested and certified in
accordance with the standards prepared by DOLE or its recognized organization/s prior to
commissioning of said equipment”.

OMMS will be your trusted consulting partner that will guide and assist you in every moment
toward sustainability and achieving compliance for your organization. Contact us..

You might also like