Professional Documents
Culture Documents
Exam For Six Sigma Green Belt Certification - Phase 2 - Part 2 (Improve & Control)
Exam For Six Sigma Green Belt Certification - Phase 2 - Part 2 (Improve & Control)
Dashboard My courses SSGB-Ph2 Exam for Analyze - II Exam for Six Sigma Green Belt Certification - Phase 2 -
Part 2 (Improve & Control)
It is found that if we add bacterial stains of type A & B, with pre-treatments of 1 & 2; the resistance to
diseases can be optimized using the data in file 18-WaterResistance.MTW (click the link below for
opening this file)
https://www.ecourse.qultima.org/pluginfile.php/1/question/questiontext/15089/1/2923/18-
WaterResistance.MTW
The P-value of Stain in final reduced model for the design is
Select one:
a. 0.975
b. 0.020
c. None of the mentioned Options
d. 0.001
Question 2 Correct Mark 1.00 out of 1.00
k
The concentricity of fiber in coating depends on Viscosity, Pressure and Temperature. A 2 Full Factorial
DOE is designed and data is collected as per File "21-Concentricity-17.MTW" (Please click on link below)
https://www.ecourse.qultima.org/pluginfile.php/1/question/questiontext/15089/2/2900/21-
Concentricity-17.MTW
Please identify the P-value of Viscosity in the final Model.
Select one:
a. 0.002
b. 0.199
c. 0.012
d. 0.000
k
The concentricity of fiber in coating depends on Viscosity, Pressure and Temperature. A 2 Full Factorial
DOE is designed and data is collected as per File "21-Concentricity-17.MTW" (Please click on link below)
https://www.ecourse.qultima.org/pluginfile.php/1/question/questiontext/15089/3/2912/21-
Concentricity-17.MTW
What is the coefficient of the term Pressure*Temp (Coded Units) in the final Model?
Select one:
a. - 5.0
b. 11.5
c. 2.5
d. - 0.75
Question 4 Correct Mark 1.00 out of 1.00
It is found that if we add bacterial stains of type A & B, with pre-treatments of 1 & 2; the resistance to
diseases can be optimized using the data in file 18-WaterResistance.MTW (click the link below for
opening this file)
https://www.ecourse.qultima.org/pluginfile.php/1/question/questiontext/15089/4/2918/18-
WaterResistance.MTW
If the value of stain = B and Pretreatment = 1, then how much resistance is expected to be as per
the final reduced model for the design?
Select one:
a. 49.0667
b. 44.6333
c. 57.1667
d. 52.6333
It is found that if we add bacterial stains of type A & B, with pre-treatments of 1 & 2; the resistance to
diseases can be optimized using the data in file 18-WaterResistance.MTW (click the link below for
opening this file)
https://www.ecourse.qultima.org/pluginfile.php/1/question/questiontext/15089/5/2920/18-
WaterResistance.MTW
In the final reduced model for the design, which 2 standard run values seems to indicate large
residuals?
Select one:
a. 2, 4
b. 1, 3
c. No residuals are large
d. 4, 8
Question 6 Correct Mark 1.00 out of 1.00
k
The concentricity of fiber in coating depends on Viscosity, Pressure and Temperature. A 2 Full Factorial
DOE is designed and data is collected as per File "21-Concentricity-17.MTW" (Please click on link below)
https://www.ecourse.qultima.org/pluginfile.php/1/question/questiontext/15089/6/2902/21-
Concentricity-17.MTW
Please identify the P-value of Temp in the final Model.
Select one:
a. 0.000
b. 0.012
c. 0.002
d. 0.199
It is found that if we add bacterial stains of type A & B, with pre-treatments of 1 & 2; the resistance to
diseases can be optimized using the data in file 18-WaterResistance.MTW (click the link below for
opening this file)
https://www.ecourse.qultima.org/pluginfile.php/1/question/questiontext/15089/7/2917/18-
WaterResistance.MTW
If the value of stain = A and Pretreatment = 2, then how much resistance is expected to be as per
the final reduced model for the design?
Select one:
a. 52.6333
b. 44.6333
c. 57.1667
d. 49.0667
Question 8 Incorrect Mark 0.00 out of 1.00
It is found that if we add bacterial stains of type A & B, with pre-treatments of 1 & 2; the resistance to
diseases can be optimized using the data in file 18-WaterResistance.MTW (click the link below for
opening this file)
https://www.ecourse.qultima.org/pluginfile.php/1/question/questiontext/15089/8/2919/18-
WaterResistance.MTW
If the value of stain = B and Pretreatment = 2, then how much resistance is expected to be as per
the final reduced model for the design?
Select one:
a. 44.6333
b. 49.0667
c. 52.6333
d. 57.1667
It is found that if we add bacterial stains of type A & B, with pre-treatments of 1 & 2; the resistance to
diseases can be optimized using the data in file 18-WaterResistance.MTW (click the link below for
opening this file)
https://www.ecourse.qultima.org/pluginfile.php/1/question/questiontext/15089/9/2922/18-
WaterResistance.MTW
The final reduced model for the design has following terms
Select one:
a. Stain
b. Pretreatment
c. Stain * Pretreatment
Question 10 Correct Mark 1.00 out of 1.00
k
The concentricity of fiber in coating depends on Viscosity, Pressure and Temperature. A 2 Full Factorial
DOE is designed and data is collected as per File "21-Concentricity-17.MTW" (Please click on link below)
https://www.ecourse.qultima.org/pluginfile.php/1/question/questiontext/15089/10/2905/21-
Concentricity.MTW
What is the coefficient of the term Viscosity (Uncoded Units) in the final Model?
Select one:
a. 43.94
b. 0.05
c. 0.3767
d. - 0.022
k
The concentricity of fiber in coating depends on Viscosity, Pressure and Temperature. A 2 Full Factorial
DOE is designed and data is collected as per File "21-Concentricity-17.MTW" (Please click on link below)
https://www.ecourse.qultima.org/pluginfile.php/1/question/questiontext/15089/11/2904/21-
Concentricity-17.MTW
How much variation in concentricity is explained by the terms in the final Model?
Select one:
a. 99.11%
b. 81.25%
c. 97.30%
d. 99.87%
Question 12 Correct Mark 1.00 out of 1.00
k
The concentricity of fiber in coating depends on Viscosity, Pressure and Temperature. A 2 Full Factorial
DOE is designed and data is collected as per File "21-Concentricity-17.MTW" (Please click on link below)
https://www.ecourse.qultima.org/pluginfile.php/1/question/questiontext/15089/12/2910/21-
Concentricity-17.MTW
What is the coefficient of the term Pressure (Coded Units) in the final Model?
Select one:
a. 11.5
b. 2.5
c. - 5.0
d. - 0.75
k
The concentricity of fiber in coating depends on Viscosity, Pressure and Temperature. A 2 Full Factorial
DOE is designed and data is collected as per File "21-Concentricity-17.MTW" (Please click on link below)
https://www.ecourse.qultima.org/pluginfile.php/1/question/questiontext/15089/13/2909/21-
Concentricity-17.MTW
What is the coefficient of the term Viscosity (Coded Units) in the final Model?
Select one:
a. 2.5
b. - 5.0
c. - 0.75
d. 11.5
Question 14 Incorrect Mark 0.00 out of 1.00
k
The concentricity of fiber in coating depends on Viscosity, Pressure and Temperature. A 2 Full Factorial
DOE is designed and data is collected as per File "21-Concentricity-17.MTW" (Please click on link below)
https://www.ecourse.qultima.org/pluginfile.php/1/question/questiontext/15089/14/2897/21-
Concentricity-17.MTW
Please match the appropriate setting with response value based on the final Model.
The correct answer is: Viscosity = 500; Pressure = 12; Temperature = 2150 → 96, Viscosity = 600; Pressure =
12; Temperature = 2150 → 101, Viscosity = 545; Pressure = 12.5; Temperature = 2000 → 81.5, Viscosity = 600;
Pressure = 12; Temperature = 1900 → 78.7
k
The concentricity of fiber in coating depends on Viscosity, Pressure and Temperature. A 2 Full Factorial
DOE is designed and data is collected as per File "21-Concentricity-17.MTW" (Please click on link below)
https://www.ecourse.qultima.org/pluginfile.php/1/question/questiontext/15089/15/2907/21-
Concentricity-17.MTW
What is the coefficient of the term Temp (Uncoded Units) in the final Model?
Select one:
a. - 0.022
b. 43.94
c. 0.3767
d. 0.05
Question 16 Correct Mark 1.00 out of 1.00
Response is measured in terms of a customer measure called "response" (name changed for
confidentiality), along with the three factors which can influence it. The data collected is available in file
"17-NewTech.MTW" (please click on below link to open)
https://www.ecourse.qultima.org/pluginfile.php/1/question/questiontext/15089/16/2940/17-
NewTech.mtw
If a linear multiple regression model with only Main Effects into consideration is developed, the
minimum optimized value given by model is
Select one:
a. 0.3460
b. 0.2968
c. 0.3352
d. 0.3520
Response is measured in terms of a customer measure called "response" (name changed for
confidentiality), along with the three factors which can influence it. The data collected is available in file
"17-NewTech.MTW" (please click on below link to open)
https://www.ecourse.qultima.org/pluginfile.php/1/question/questiontext/15089/17/2933/17-
NewTech.mtw
If a linear multiple regression model with only Main Effects into consideration is developed, the p-
value of "Temp" is
Select one:
a. 0.011
b. 0.014
c. Can not be determined
d. 0.000
Question 18 Partially correct Mark 0.25 out of 1.00
Response is measured in terms of a customer measure called "response" (name changed for
confidentiality), along with the three factors which can influence it. The data collected is available in file
"17-NewTech.MTW" (please click on below link to open)
https://ecourse.leandigit.com/pluginfile.php/1/question/questiontext/1371/1/2086/17-NewTech.mtw
If a linear multiple regression model with only Main Effects into consideration is developed, match
the settings with response value
The correct answer is: Temp = 1576; Tension = 3.1110; Speed = 2445 → 0.3403, Temp = 1900; Tension =
1.9999; Speed = 2200 → 0.3392, Temp = 1650; Tension = 2.87; Speed = 2350 → 0.3399, Temp = 1833; Tension
= 2.34; Speed = 2325 → 0.3402
Response is measured in terms of a customer measure called "response" (name changed for
confidentiality), along with the three factors which can influence it. The data collected is available in file
"17-NewTech.MTW" (please click on below link to open)
https://www.ecourse.qultima.org/pluginfile.php/1/question/questiontext/15089/19/2936/17-
NewTech.mtw
If a linear multiple regression model with only Main Effects into consideration is developed, the
coefficient of "Temp" is
Select one:
a. 0.00352
b. 0.000012
c. 0.000005
d. 0.29865
Response is measured in terms of a customer measure called "response" (name changed for
confidentiality), along with the three factors which can influence it. The data collected is available in file
"17-NewTech.MTW" (please click on below link to open)
https://www.ecourse.qultima.org/pluginfile.php/1/question/questiontext/15089/20/2938/17-
NewTech.mtw
If a linear multiple regression model with only Main Effects into consideration is developed, the
coefficient of "Speed" is
Select one:
a. 0.000005
b. 0.000012
c. 0.29865
d. 0.00352
Response is measured in terms of a customer measure called "response" (name changed for
confidentiality), along with the three factors which can influence it. The data collected is available in file
"17-NewTech.MTW" (please click on below link to open)
https://www.ecourse.qultima.org/pluginfile.php/1/question/questiontext/15089/21/2932/17-
NewTech.mtw
2
Please suggest the R -adj of linear model having Tension as only factor under consideration.
Select one:
a. 95.9 %
b. 95.1 %
c. 93.0 %
d. 93.4 %
Question 22 Correct Mark 1.00 out of 1.00
Response is measured in terms of a customer measure called "response" (name changed for
confidentiality), along with the three factors which can influence it. The data collected is available in file
"17-NewTech.MTW" (please click on below link to open)
https://www.ecourse.qultima.org/pluginfile.php/1/question/questiontext/15089/22/2935/17-
NewTech.mtw
If a linear multiple regression model with only Main Effects into consideration is developed, the p-
value of "Speed" is
Select one:
a. 0.011
b. 0.014
c. Can not be determined
d. 0.000
Response is measured in terms of a customer measure called "response" (name changed for
confidentiality), along with the three factors which can influence it. The data collected is available in file
"17-NewTech.MTW" (please click on below link to open)
https://www.ecourse.qultima.org/pluginfile.php/1/question/questiontext/15089/23/2934/17-
NewTech.mtw
If a linear multiple regression model with only Main Effects into consideration is developed, the p-
value of "Tension" is
Select one:
a. 0.011
b. 0.014
c. 0.000
d. Can not be determined
Question 24 Correct Mark 1.00 out of 1.00
Response is measured in terms of a customer measure called "response" (name changed for
confidentiality), along with the three factors which can influence it. The data collected is available in file
"17-NewTech.MTW" (please click on below link to open)
https://www.ecourse.qultima.org/pluginfile.php/1/question/questiontext/15089/24/2931/17-
NewTech.mtw
2
Please suggest the R -adj of linear model having Temp as only factor under consideration.
Select one:
a. 93.0 %
b. 95.9 %
c. 93.4 %
d. 95.1 %
Response is measured in terms of a customer measure called "response" (name changed for
confidentiality), along with the three factors which can influence it. The data collected is available in file
"17-NewTech.MTW" (please click on below link to open)
https://www.ecourse.qultima.org/pluginfile.php/1/question/questiontext/15089/25/2941/17-
NewTech.mtw
If a linear multiple regression model with only Main Effects into consideration is developed, the
maximum optimized value given by model is
Select one:
a. 0.3520
b. 0.2968
c. 0.3352
d. 0.3460
Question 26 Correct Mark 1.00 out of 1.00
What should you do if a point occurs beyond Zone C, while plotting a control chart?
Question 28 Incorrect Mark 0.00 out of 1.00
a. Noise
b. Inputs
d. Outpurs
c. Specification Limits
d. Control Limits
When Process Capability is more than 1, control limits are inside specification
limits. An out of control
point, in
most cases will be within specification and appropriate action will bring
improve stability of process
without even referring to specifications. (Inaction expected)
In both the cases, specification limit is
non-relevant and their presence may lead to over-adjustment or
inaction.
Question 30 Correct Mark 1.00 out of 1.00
c. Type 2 SPC
d. Wall Paper
Samples are taken every hour from a punch line. The pieces are segregated into good and rejected. The
data is stored in File "23-VRejected.MTW" (Open file by clicking the link given below).
https://www.ecourse.qultima.org/pluginfile.php/1/question/questiontext/15089/31/2886/23-
VRejected.mtw
Please identify the sample indicating the special cause on control chart
Select one:
a. 7
b. 5
c. 4
d. 6
Question 32 Incorrect Mark 0.00 out of 1.00
Samples are taken every hour from a punch line. The defects on each piece were identified and
counted. The data is stored in File "25-VDefects.MTW" (Open file by clicking the link given below).
https://www.ecourse.qultima.org/pluginfile.php/1/question/questiontext/15089/32/2887/25-
VDefects.mtw
The Upper Control Limit of appropriate control chart is
Select one:
a. 0.2519
b. Variable as sample size varies
c. 0
d. 0.5530
Samples are taken every hour from a punch line. The pieces are segregated into good and rejected. The
data is stored in File "24-KRejected.MTW" (Open file by clicking the link given below).
https://www.ecourse.qultima.org/pluginfile.php/1/question/questiontext/15089/33/2882/24-
KRejected.mtw
The Special Cause due to Test 3 is evident in which sample of the control chart is
Select one:
a. 09:00 AM sample
b. 11:00 AM sample
c. 09:00 PM sample
Question 34 Incorrect Mark 0.00 out of 1.00
Samples are taken every hour from a punch line. The defects on each piece were identified and
counted. The data is stored in File "25-VDefects.MTW" (Open file by clicking the link given below).
https://www.ecourse.qultima.org/pluginfile.php/1/question/questiontext/15089/34/2891/25-
VDefects.mtw
The Test of Special Cause, which become evident at sample no. 28 of appropriate control chart is
Select one:
a. None of the mentioned Options
b. Both Test 3 & 5
c. Test 3
d. Test 5
It is Test 1 evidently.
Samples are taken every hour from a punch line. The defects on each piece were identified and
counted. The data is stored in File "25-VDefects.MTW" (Open file by clicking the link given below).
https://www.ecourse.qultima.org/pluginfile.php/1/question/questiontext/15089/35/2890/25-
VDefects.mtw
The Test(s) of Special Cause, which become evident at sample no. 12 of appropriate control chart is
Select one:
a. Test 5
b. Test 3
c. Both Test 3 & 5
d. None of the mentioned Options
Question 36 Correct Mark 1.00 out of 1.00
a. To institutionalize process
improvements.
a. 2-1-3-4
b. 4-2-1-3
c. 1-3-4-2
Question 38 Correct Mark 1.00 out of 1.00
Corrective flag is
Preventive Control, where the process stops as the cause of defect appears.
Select one:
True
False
Select one:
True
False
◄ Exam for Six Sigma Green Belt Certification - Phase 2 - Part 1 (Analyze-II)
Jump to...