Professional Documents
Culture Documents
MR419X6188A000
MR419X6188A000
WIRING
88A
V1 Edition Anglaise
"The repair procedures given by the manufacturer in this document are based on the All rights reserved by Renault s.a.s.
technical specifications current when it was prepared.
Copying or translating, in part or in full, of this document or use of the service part
The procedures may be modified as a result of changes introduced by the reference numbering system is forbidden without the prior written authority of
manufacturer in the production of the various component units and accessories from Renault s.a.s.
which his vehicles are constructed."
MR-419-X61-88A000$010.mif
V1
88A-2
WIRING
Fault finding – Fault finding chart 88A
ALP1 No communication from the diagnostic socket
Use a multimeter on the ohmmeter setting to check the resistance between connections 133C and 133B
of component 225. To carry out this test, the vehicle must be in hibernation mode.
Is the resistance measured ≈ 60 Ω?
YES NO
Use a test light to check for + 12 V between connection BP32 of component 225 and a chassis earth.
YES NO
Use a test light to check for + 12 V between Carry out a continuity test on connection BP32
connection AP43 of component 225 and a between component 225 and fuse F21 (15A)
chassis earth. of component 260.
.
YES NO YES NO
NO YES NO YES
MR-419-X61-88A000$020.mif
V1
88A-3
WIRING
Fault finding – Fault finding chart 88A
ALP1
CONTINUED 1
NO YES
MR-419-X61-88A000$020.mif
V1
88A-4
WIRING
Fault finding – Fault finding chart 88A
ALP1
CONTINUED 2
Use a multimeter on the ohmmeter setting, to check the resistance between connections 133C and 133B
of component 1337.
To carry out this test, the vehicle must be in hibernation mode.
YES NO
YES NO YES NO
Fault on connection
Use a multimeter in the Use a multimeter in the 133C or 133B, if there is
ohmmeter setting, and ohmmeter setting, to a repair procedure,
check the resistance check the resistance repair the wiring
Replace the Protection between connections between connections (see Technical Note
and Switching Unit. 3SN and 3SM 133C and 133B 6015A, Repairing
of component 120. of component 645. electrical wiring,
To carry out this test, To carry out this test, Wiring: Precautions
the vehicle must be in the vehicle must be in for repair), otherwise
hibernation mode. hibernation mode. replace the wiring.
YES NO YES NO
Fault on connection
Fault on connection
133C or 133B, if there is
3SN or 3SM, if there is
a repair procedure
a repair procedure
(see Technical Note
(see Technical Note Replace
6015A, Repairing Replace the passenger
6015A, Repairing the injection
electrical wiring, compartment computer.
electrical wiring, Wiring: computer.
Wiring: Precautions
Precautions for repair),
for repair), repair the
repair the wiring, otherwise
wiring, otherwise
replace the wiring.
replace the wiring.
MR-419-X61-88A000$020.mif
V1
88A-5
WIRING
Fault finding – Fault finding chart 88A
ALP2 No dialogue with the PASSENGER COMPARTMENT COMPUTER
Carry out a continuity test on connection 133C between components 645 and 1337.
YES NO
YES NO
YES NO
YES NO
MR-419-X61-88A000$020.mif
V1
88A-6
WIRING
Fault finding – Fault finding chart 88A
ALP3 No communication with the instrument panel
Carry out a continuity test on connection 133H between components 645 and 247.
YES NO
YES NO
YES NO
YES NO
MR-419-X61-88A000$020.mif
V1
88A-7
WIRING
Fault finding – Fault finding chart 88A
ALP4 No communication with the air conditioning control unit
Carry out a continuity test on connection 133C between components 419 and 1337.
YES NO
YES NO
YES NO
YES NO
MR-419-X61-88A000$020.mif
V1
88A-8
WIRING
Fault finding – Fault finding chart 88A
ALP5 No communication with the airbag / pretensioner COMPUTER
Carry out a continuity test on connection 133B between components 756 and 1337.
YES NO
YES NO
YES NO
YES NO
MR-419-X61-88A000$020.mif
V1
88A-9
WIRING
Fault finding – Fault finding chart 88A
No communication with the additional special vehicle
ALP6
conversion unit
Carry out a continuity test on connection 133B between components 1664 and 1337.
YES NO
YES NO
YES NO
YES NO
MR-419-X61-88A000$020.mif
V1
88A-10
WIRING
Fault finding – Fault finding chart 88A
ALP7 No communication with the multiplex interface unit
Carry out a continuity test on connection 133B between components 1337 and 1714.
YES NO
YES NO
YES NO
YES NO
MR-419-X61-88A000$020.mif
V1
88A-11
WIRING
Fault finding – Fault finding chart 88A
ALP8 No communication with the wheel speed computer
Carry out a continuity test on connection 133B between components 1337 and 953.
YES NO
YES NO
YES NO
YES NO
MR-419-X61-88A000$020.mif
V1
88A-12
WIRING
Fault finding – Fault finding chart 88A
ALP9 No communication with electric power-assisted steering system
Carry out a continuity test on connection 133B between components 1337 and 1232.
YES NO
YES NO
YES NO
YES NO
MR-419-X61-88A000$020.mif
V1
88A-13
WIRING
Fault finding – Fault finding chart 88A
ALP10 No communication with the Gearbox computer
Carry out a continuity test on connection 3MT between components 1337 and 119.
YES NO
YES NO
YES NO
YES NO
If sequential gearbox, see 21B, Fault on connection 3MS, if there is a repair procedure
Sequential gearbox. (see Technical Note 6015A, Repairing electrical wiring, Wiring:
If automatic transmission, see 23A, Precautions for repair), repair the wiring, otherwise
Automatic Transmission. replace the wiring.
MR-419-X61-88A000$020.mif
V1
88A-14
WIRING
Fault finding – Fault finding chart 88A
ALP11 No dialogue with the Injection computer
Carry out a continuity test on connection 3SM between components 1337 and 120.
YES NO
YES NO
YES NO
YES NO
MR-419-X61-88A000$020.mif
V1
88A-15
WIRING
Fault finding – Fault finding chart 88A
ALP12 No dialogue with the ABS computer
Carry out a continuity test on connection 4DN between components 1337 and 118.
YES NO
YES NO
YES NO
YES NO
MR-419-X61-88A000$020.mif
V1
88A-16
WIRING
Fault finding – Fault finding chart 88A
ALP13 No dialogue with the ABS computer
Carry out a continuity test on connection 4DN between components 1337 and 1094.
YES NO
YES NO
YES NO
YES NO
MR-419-X61-88A000$020.mif
V1
88A-17
WIRING
Fault finding – Fault finding chart 88A
ALP14 No communication with the yaw sensor
Carry out a continuity test on connection 4CV between components 1175 and 1094.
YES NO
YES NO
YES NO
YES NO
MR-419-X61-88A000$020.mif
V1
88A-18
WIRING
Fault finding – Fault finding chart 88A
ALP15 Communication fault with the MULTIMEDIA MULTIPLEX LINE
Carry out a continuity test on connection 107X between components 225 and 1714.
YES NO
YES NO
YES NO
YES NO
A B
MR-419-X61-88A000$020.mif
V1
88A-19
WIRING
Fault finding – Fault finding chart 88A
A B
YES NO
YES NO
YES NO
MR-419-X61-88A000$020.mif
V1
88A-20
WIRING
Fault finding – Fault finding chart 88A
ALP15
CONTINUED
YES NO
YES NO
YES NO
YES NO
D E
MR-419-X61-88A000$020.mif
V1
88A-21
WIRING
Fault finding – Fault finding chart 88A
D E
YES NO
YES NO
MR-419-X61-88A000$020.mif
V1
88A-22