This document provides calibration data for an injection assortment used on a specific engine model. It includes:
1) Information on the direction of rotation, beginning of delivery, injection order, tolerance zones, and angular divisions for the injection assortment.
2) Specifications for the injection nozzles, injectors, opening pressure, high pressure pipes, overpressure valve, and temperature of the testing liquid.
3) A table with adjustment operations listing revolutions/minutes, number of strokes, delivery quantity range, difference allowed, and notices for items like fuel delivery maximum, beginning of stopping, idle-speed delivery stop check, and operation number 1 check and stop.
This document provides calibration data for an injection assortment used on a specific engine model. It includes:
1) Information on the direction of rotation, beginning of delivery, injection order, tolerance zones, and angular divisions for the injection assortment.
2) Specifications for the injection nozzles, injectors, opening pressure, high pressure pipes, overpressure valve, and temperature of the testing liquid.
3) A table with adjustment operations listing revolutions/minutes, number of strokes, delivery quantity range, difference allowed, and notices for items like fuel delivery maximum, beginning of stopping, idle-speed delivery stop check, and operation number 1 check and stop.
This document provides calibration data for an injection assortment used on a specific engine model. It includes:
1) Information on the direction of rotation, beginning of delivery, injection order, tolerance zones, and angular divisions for the injection assortment.
2) Specifications for the injection nozzles, injectors, opening pressure, high pressure pipes, overpressure valve, and temperature of the testing liquid.
3) A table with adjustment operations listing revolutions/minutes, number of strokes, delivery quantity range, difference allowed, and notices for items like fuel delivery maximum, beginning of stopping, idle-speed delivery stop check, and operation number 1 check and stop.
FOR ENGINE: F6L914 The mentioned values are for MOTORPAL Test Equipment only 29/05/2023 A: 1. Direction of rotation RIGHT Adjusting pictures: S507 2. Beginning of delivery 5,0 +- 0,05 mm od/from DMP 3. Injection order 1-5-3-6-2-4 The locking device set at TBD position of 6. element. Testing liquid ISO 4113 (Shell S.9365). 4. Tolerance zone +-30' 5. Angular division 0°-60°-120°-180°-240°-300°
B: 1. Injection nozzles 0,6 mm
2. Injectors 1688901101 3. Opening pressure 20,7 MPa 4. High pressure pipes 6x2x600 mm 5. Overpressure valve 160-200 kPa 6. Temp. of test. liquid ISO 4113 (Shell) 40 °C