Professional Documents
Culture Documents
7393385a-Cec4 ZA Bentonite Grease EP 2 en-ZA
7393385a-Cec4 ZA Bentonite Grease EP 2 en-ZA
Description
Sasol Bentonite Grease EP 2 is an inorganic clay based grease for plain and rolling bearings operating at
temperatures higher than those conventional soap based greases can be used.
Application
This grease is mostly used for fans, plumber blades under ground mining, plastic injection moulder, etc.
Typical Characteristics
Property Units Typical ASTM IP
Worked Penetration 0,1 mm 280 D217 50
Drop Point °C, min Non-melt D566 132
NLGI 2
Timken O.K. Load, min kg >27
Colour, Visual Brown
Base Oil Properties (virgin):
Viscosity @ 40°C mm²/s 200 D445 71
Operating temperature °C -15 to +200
Page 1 of 2
Storage and Handling
Use PVC, nitrile or other product-resistant gloves and protective clothing in cases where frequent or prolonged skin
contact cannot be avoided.
Where eye contact is a potential hazard, goggles or face shields should be worn.
Respiratory protection is not normally required under normal conditions.
Avoid elevated temperatures (exceeding 100°C) and contact with water and other fluids.
Do not store in open containers.
Ambient temperatures and atmospheric pressures normally encountered within buildings are acceptable.
Pack Information
Product Code Pack Size
15 kg
180 kg
Page 2 of 2