ffi<tsrmrr:srr<.

lrrtrrgffi &
RW o't^?
BAN *,rED
F*:.il*:*?*nn31krs,,',
ISO 9001 : 2015 CERTIFIED COMPANY
Manufacturer of Telecommunication Cables (Copper & Optical Fiber), HDPE Duct & Electircal Overhead Conductors & Cables
m

ICAL SPECI FICATION

TECH N
For
HDPE Silicon Gore DUCT (50/43 mm)

All Rights Reserved copyright @2021, Bangladesh cable Shilpa Limited

htto://www.bcsl. eov.bd
 Technical Specification of 50143 mm Size HDPE Silicon Core DUCT Pipe

No Parameter Specified Value for Bangladesh Railway

A Test on HDPE DUCT (Pipe) raw materials
0.2-0.9 g/10min
I Melt flow rate
190o C,5kg Load
2 Density test 0.942-0.958 g/cmr at 23+l-2oC
B Test on finished product (DUCT)
Visual &Dimension Plain inside & outside surface Free from blisters
a) Aooearance shrink hole, flaking, scratches & roughness
J b) Outer dia. in mm 50+/-0.4-0.0 mm
c)Wall thickness in mm 3.5mm+/-0.2 mm
d)Length (meters) 500+/-10 meters

4 Melt Flow Rate (MFR) of duct MFR of Duct Percent charge in MFR <30o/o

Density of Duct
5 Density of finished product
Difference < 0.003 g/cm3
6 Heat reversion test <3Yo
Environment Stress Crack Resistance
7 No cracking for 96 h @50" C
(ESCR)
No localized swelling, leakage or bursting at
8 Hydrostatic pressure test
80o C, 3.8 MPa for 48 hours
Deflection at 50 kg load for 1 minute <lUyo
9 Crush Resistance Test
Recovery <ZYo for 5 minutes
M n.20 N/mm2
10 Tensile Strength & Elongation Test
Min.500%
l1 Oxidation induction time > 30 minutes
12 Internal coeffi cient of friction < 0.06
13 Color fading No discoloration
t4 Operating pressure during blow >5bar
l5 Drum lengths 0.5-1.0 km
l6 Duct color Yellow

Installation and operating temperature of duct:

Storage temperature :-40 to +60oC;
I7 Temperature limit
Installation temperature:-40 to 70oC
Operating temperature:-40 to 7OoC

rMd. Saifur Rahman

Manager (R & D) alc
i:iangladesh Cable Shilpa Ltniiteo
Khulna-9206

All Rights Reserved Copyright @2021, Bangladesh Cable Shilpa Limited

http://www.bcsl. sov.bd