Professional Documents
Culture Documents
FWR-KAR-SX LOCATION-K-442 (KDN-16) - For Print
FWR-KAR-SX LOCATION-K-442 (KDN-16) - For Print
KDN-16 (K-442)
FINAL WELL REPORT
FINAL WELL REPORT KDN-16 (K-442)
APPROVED BY :
SAWASH SIDDEQ
FARHAD ABDULRAHAMN
JALAL AMIN
Table of Contents
Table of Contents ........................................................................................................... I
List of Figures ............................................................................................................. IV
List of Tables ................................................................................................................. V
1. Introduction ............................................................................................................... 1
1.1. Well Summary......................................................................................................................... 2
1.2. Well Location .......................................................................................................................... 3
1.3. General Well Data ................................................................................................................... 4
2. Geology Information Part ......................................................................................... 5
2.1. The Field Structure .................................................................................................................. 5
2.2. Formation Tops and Markers .................................................................................................. 7
2.3. Stratigraphy ............................................................................................................................. 8
2.3.1. Stratigraphy of Tertiary.................................................................................................... 8
2.4. Lithology Description ........................................................................................................... 10
2.5. Sample Manifest .................................................................................................................... 15
2.6. Well Tops Correlation ........................................................................................................... 17
2.7. Underground Condition......................................................................................................... 18
2.7.1. Oil Shows ....................................................................................................................... 18
2.7.2. Gas Shows ...................................................................................................................... 18
2.7.3. Core Sample ................................................................................................................... 19
2.8. Master Log ............................................................................................................................ 19
3. Drilling Information ............................................................................................... 20
3.1. Drilling Operation Summary:................................................................................................ 20
3.1.1. First hole 17 1/2" hole interval (000-410m RTKB) ....................................................... 20
3.1.2. Second hole 12 1/4" hole interval (410-887 m RTKB) ................................................. 20
3.1.3. Third hole 8 1/2" hole interval (887-1089 m RTKB) ...................................................... 20
3.2. Hole Problems and their remedies: ....................................................................................... 22
3.2.1. First hole 17 1/2’’ (000 m-410 m RTKB) ...................................................................... 22
3.2.2. Second hole 12 1/4" hole interval (410-887 m RTKB) ................................................. 22
3.2.3. Third hole 8 1/2" hole interval (887-1089 m RTKB) .................................................... 22
3.3. Drilling fluid Program: .......................................................................................................... 23
3.4. Mud losses & treatment: ....................................................................................................... 24
3.5. BHA Data: ............................................................................................................................. 25
3.5.1. BHA for hole size: 17 ½" (First Hole): ......................................................................... 25
3.5.2. BHA for hole size: 12 ¼" (Second Hole): ..................................................................... 25
3.5.3. BHA for hole size: 8 1/2" (Third Hole): ......................................................................... 26
I
3.6. Casing Data: .......................................................................................................................... 26
3.7. Casing and cementing jobs data: ........................................................................................... 27
3.8. Cement plug jobs:.................................................................................................................. 28
3.9. Casing Pressure Test: ............................................................................................................ 28
3.10. Bit Record: ......................................................................................................................... 29
3.11. Well Deviation Record: ..................................................................................................... 30
3.12. Wellhead and BOP’s Pressure Test: .................................................................................. 31
3.13. Drilling Progress Curve: .................................................................................................... 32
3.14. Drilling and Well Completion Time Analyses: ................................................................. 33
3.15. Wellhead and x-mass tree assembly Data: ........................................................................ 38
4. Formation Evaluation............................................................................................. 39
4.1. Introduction ........................................................................................................................... 39
4.2. Abbreviations of Wireline Logging Tools ............................................................................ 39
4.3. Wireline Logging Runs Summary......................................................................................... 39
4.3.1. Open Hole Section 12.25 IN .......................................................................................... 39
4.3.2. Casing Section 9.625 IN ................................................................................................ 40
4.3.3. Open Hole Section 8.5 IN .............................................................................................. 40
4.3.4. Casing Section 7 IN ....................................................................................................... 40
4.3.5. Casing Section 7 IN (Perforation Operation)................................................................. 40
4.4. Open Hole Logging Results and Discussion ......................................................................... 41
4.4.1. 1st Section 12.25" Openhole (Lower Fars):- ................................................................. 41
4.4.2. 2nd Section 8.5" Open hole (Tertiary Reservoir):- ........................................................ 41
4.5. Hydrocarbon / Fluid Contacts Indication .............................................................................. 41
4.6. Well Correlation/Log Data .................................................................................................... 42
4.7. Formation Evaluation ............................................................................................................ 45
4.8. Cement Bond Log Evaluation ............................................................................................... 45
4.8.1. Cased Hole 9.625 IN ...................................................................................................... 45
4.8.2. Cased Hole 7.0 IN .......................................................................................................... 45
5. Petroleum Engineering ........................................................................................... 46
5.1. Final Well Sketch .................................................................................................................. 46
5.2. Well Completion Diagram .................................................................................................... 47
5.3. Well Flowing Events ............................................................................................................. 48
5.4. Wellhead and XMT Diagram ................................................................................................ 50
5.5. Acidizing ............................................................................................................................... 51
5.6. Field Measurements .............................................................................................................. 52
5.7. Surface Well Testing Summary ............................................................................................ 53
6. Healthy Safety & environment ............................................................................... 54
II
6.1. About our duties: ................................................................................................................... 54
6.2. HSE equipment at well location: ........................................................................................... 54
6.3. Observation and Cases: ......................................................................................................... 55
6.4. Hygiene and environmental health:....................................................................................... 55
6.5. Confined spaces: ................................................................................................................... 55
6.6. Hazardous jobs: ..................................................................................................................... 56
6.7. Hazardous incidents: ............................................................................................................. 56
6.8. Safety drills and inductions: .................................................................................................. 56
7. Appendixes............................................................................................................... 57
7.1. Appendix P ............................................................................................................................ 57
7.1.1. 13.375 IN Casing tally ................................................................................................... 57
7.1.2. 9.625 IN Casing tally ..................................................................................................... 58
7.1.3. 7.0 IN Casing tally ......................................................................................................... 60
7.1.4. 4 1/2 IN Tubing tally...................................................................................................... 62
7.2. Appendix F ............................................................................................................................ 65
7.2.1. CPI for OH 8.5 IN .......................................................................................................... 65
7.3. Appendix G ........................................................................................................................... 66
7.3.1. Master Log ..................................................................................................................... 66
III
List of Figures
Figure 1-1: Illustrate Structural contour map of Avanah Dense ............................................................ 3
Figure 4- 1: Shows the location of well on the top of Avanah Dense formation Map ........................ 42
Figure 4- 2: Shows the vertical and horizontal cross section............................................................... 43
Figure 4- 3: Shows the horizontal correlation between wells (K-224, K-306, and K-153) ................. 44
IV
List of Tables
V
Table 4. 8: Shows the petro-physical property of the formations ........................................................ 45
Table 4. 9: Shows Wireline Logging Summary log evaluation for 9 5/8" (Cased Hole) Section ....... 45
Table 4. 10: Shows Wireline Logging Summary log evaluation for 7" (Cased Hole) Section ........... 45
VI
FINAL WELL REPORT
KAR COMPANY DRILLING NEW WELLS
KHURMALA DOME FIELD WELL NO: KDN-16 (K-442)
FIELD DIVISION WELL LOCATION (SX)
1. Introduction
Khurmala Dome (qubbat Khurmala) is one of three domes making up the super-giant oil-bearing
“Kirkuk” field (haql Kirkuk) in northern Iraq. The field has a clear surface expression, manifested by
a sinuous anticline about 105 km long and 3-5 km wide. The two main domes, Baba and Avanah are
located near Kirkuk, while the Khurmala dome is located near Erbil.
The Khurmala field is the northernmost of the three domes, although a fourth, smaller dome is present
further north: Zab dome, this is now confirmed by the recent (November 2013) discovery made by
Oryx Petroleum, Operator of the Hawler license area to the NE of Khurmala. The two main domes
(Baba and Avanah) are located in Kirkuk, while the third one (Khurmala) is located in Erbil. It has
been decided that Erbil will take the lead in managing and developing the Khurmala Dome. For that
purpose, Kar Group working with MNR, has been asked to operate and maintain the field.
The Khurmala Dome is located about 80 km to the north west of Kirkuk and 35 km west of Erbil, lies
fully on the territory of Erbil Governorate. The Khurmala Dome is about 22 km long and 3 km wide.
Hydrocarbons are produced from the Tertiary (main limestone) reservoir, a fold hydrocarbon trap
(Anticline fold) and rock type is Dolomitic limestone with reasonably good porosity and permeability,
which is characterized by natural fractures. The oil column thickness is thought to be about 60 m
sandwiched between a large gas cap and aquifer. The estimated Gas-Oil Contact is located at a depth
of 593 m MSL and Oil-Water Contact at a depth between 700 and 650 m MSL depending on location.
1
FINAL WELL REPORT
KAR COMPANY DRILLING NEW WELLS
KHURMALA DOME FIELD WELL NO: KDN-16 (K-442)
FIELD DIVISION WELL LOCATION (SX)
The well stimulated with 20% HCL acid and completion test confirm good well production potential,
producing 6900 bbl/day @ Choke 128".
2
FINAL WELL REPORT
KAR COMPANY DRILLING NEW WELLS
KHURMALA DOME FIELD WELL NO: KDN-16 (K-442)
FIELD DIVISION WELL LOCATION (SX)
Location Elevation,
Easting Northing
(Planned Well) m AMSL
3
FINAL WELL REPORT
KAR COMPANY DRILLING NEW WELLS
KHURMALA DOME FIELD WELL NO: KDN-16 (K-442)
FIELD DIVISION WELL LOCATION (SX)
Field Khurmala
Location SX
Datum RTKB
GL 344.42 m
RF 9m
RTKB 353.42 m
Wellhead and XMT 13 5/8” x 9 5/8” x 7” x 4.5 – 3000psi (H2S= %4 and CO2
Assemble %7)
4
FINAL WELL REPORT
KAR COMPANY DRILLING NEW WELLS
KHURMALA DOME FIELD WELL NO: KDN-16 (K-442)
FIELD DIVISION WELL LOCATION (SX)
5
FINAL WELL REPORT
KAR COMPANY DRILLING NEW WELLS
KHURMALA DOME FIELD WELL NO: KDN-16 (K-442)
FIELD DIVISION WELL LOCATION (SX)
6
FINAL WELL REPORT
KAR COMPANY DRILLING NEW WELLS
KHURMALA DOME FIELD WELL NO: KDN-16 (K-442)
FIELD DIVISION WELL LOCATION (SX)
7
FINAL WELL REPORT
KAR COMPANY DRILLING NEW WELLS
KHURMALA DOME FIELD WELL NO: KDN-16 (K-442)
FIELD DIVISION WELL LOCATION (SX)
2.3. Stratigraphy
The rocks exposed in the area have been subdivided into the Fars and Bakhtyari series (in NE flanks,
N Plunge near well k - 295), which are more or less lithological units, have their greatest influence in
evolution of the present-day topography. Generally, their exposures are confined to time anticline
belts. Whereas in the synclines alluvium and other recent deposits cover the most of the sequence. The
Stratigraphy sequences of the drilled wells encountered from the youngest to the oldest as described
below:
1. Upper/ Middle Fars formation: - (U. Miocene) (0 -632) m. Estimated true thickness: 632m.
The formation is predominantly of clastic one, it consists of an alternating series of Sandstone, reddish
brown, partly grey, fine to medium grains, inter bedded with Claystone, reddish to red brown, light
grey soft, slightly hard argillaceous, calcareous, semi plastic, show gradation into Marley to blue soft
plastic Calcareous and Argillaceous with Anhydrite nodules, increase towards the base of the
sequence. It found near tops of formation deposited of fresh water limestone white to buff in this well
not recovered due to taken of Samples intervals.
2. Lower Fars formation: - (M. Miocene). (632- 902) m. Estimated true thickness: 270 m.
The formation consists of alternation of Gypsum, Anhydrite, lagoonal Limestone markers, Marls, and
Siltstone with occasional rocks Salts. The top of the formation is marked by massive Anhydrite known
as (A0). The thickness of the formation in Khurmala dome
The unit consists of an alternating sequence of reddish – brown, fine Sandstone, red siltstone, molted
blue Marls, sporadic with thin bands of Limestone markers and Anhydrite.
8
FINAL WELL REPORT
KAR COMPANY DRILLING NEW WELLS
KHURMALA DOME FIELD WELL NO: KDN-16 (K-442)
FIELD DIVISION WELL LOCATION (SX)
This unit consists of thick bands of white crystalline Anhydrites, inter bedded with bands of reddish
or blue Marls & Siltstone with thin bands of limestone (B1 – B4).
This unit is variable in thickness due to salt tectonic. It consists of alternations of Anhydrite, Gypsum,
Halite, Marl, and rare band of limestone(S-1) marker, which is very useful marker, this marker was
recognized in k -442, KDN-16.
This unit consists of a succession of thick beds of Anhydrite with some Gypsum inter bedded with thin
bands of Limestone and Marls, in this sequence several marker horizons have been established over
Kirkuk field, namely (T1 - T5) Limestone.
3. Basal Fars Conglomerate: - (M. Miocene), (902 - 906) m, estimated true thickness is 5 m.
This is conglomeratic limestone which is on the whole white and having indications of gas and oils
staining. The section is full of miliolids, dendritina sp. and reworked nummulitesspp. The base
represented surface of Unconformity
4. Avanah Dense FM: - (Upper/Middle Eocene), (906–982) m,
Estimated true thickness is 76 m.
This is fairly variable formation, having predominately a recrystallized fore – reef type lithology but
with some marly. The rock is porous, vuggy, fractured and locally stylolitic. Fauna includes
nummulites spp. Discocyclina sp., miliolids, textularids, alveeolina spp. Orbitolites sp., shell
fragments, echinoid debris, and algae. The rock is frequently pyritic and contains abundant calcite
growths.
5. Avanah Porous FM: - (Upper/Middle Eocene), (982 - 1037) m,
Estimated true thickness is 55m.
The well entered the gas cap of the (Main limestone) pay on this dome (khurmala), passed through the
oil column and into the water zone.
9
FINAL WELL REPORT
KAR COMPANY DRILLING NEW WELLS
KHURMALA DOME FIELD WELL NO: KDN-16 (K-442)
FIELD DIVISION WELL LOCATION (SX)
Top of Lower Fars formation (Upper red bed) @ 632m RTKB (-277.5 BMSL).
R6 @ 636 m MD.
R7 @ 648 m MD.
R8 @ 656 m MD.
R9 @ 668 m MD.
10
FINAL WELL REPORT
KAR COMPANY DRILLING NEW WELLS
KHURMALA DOME FIELD WELL NO: KDN-16 (K-442)
FIELD DIVISION WELL LOCATION (SX)
11
FINAL WELL REPORT
KAR COMPANY DRILLING NEW WELLS
KHURMALA DOME FIELD WELL NO: KDN-16 (K-442)
FIELD DIVISION WELL LOCATION (SX)
Marl: Greenish gray, light gray, green, blocky to subblocky, moderately firm, occasionally sticky,
slightly calcareous.
From (810-858) m MD alternating of Salt, Silty Clay, Anhydrite, Marl and Limestone.
Salt (Halite): White to colorless, crystalline, transparent, translucent, slightly hard, pure.
SiltyClay: Gray to light gray, moderately hard to hard, amorphous, sub blocky to sub fissile,
argillaceous matrix, calcareous.
Anhydrite: White, buff, creamy, snowy, translucent, blocky to sub blocky, very compact, very hard
occasionally soft to firm.
Marl: Greenish gray, light gray, green, blocky to subblocky, moderately firm, occasionally sticky,
slightly calcareous.
S1or X-Limestone: Mudstone to wackestone, light grey to grey, puff in part, moderately hard , porous,
vuggy in part, marly in part.
From (887-902) m MD mainly limestone alternating with Silt clay with streaks of Silt clay, Marl
and Anhydrite
Limestone T4, T5: Wackestone to Packstone gray, creamy, light gray, brown, crypto to micro
crystalline, moderately hard to hard, oil staining, argillaceous, marly.
Silt clay: Gray to light gray, moderately hard to hard, amorphous, sub blocky to sub fissile,
argillaceous matrix, calcareous
12
FINAL WELL REPORT
KAR COMPANY DRILLING NEW WELLS
KHURMALA DOME FIELD WELL NO: KDN-16 (K-442)
FIELD DIVISION WELL LOCATION (SX)
Marl: Greenish gray, light gray, green, blocky to sub blocky, moderately firm, occasionally sticky,
slightly calcareous.
Anhydrite: White, buff, creamy, snowy, translucent, blocky to sub blocky, very compact, very hard
occasionally soft to firm.
Top of Avanah Dense E1 @ 906m RTKB (-551.5 BMSL) Typical lagonal Pilaspi Formation
Finger
From (906-924) m MD Mainly Limestone
Limestone: White to whittles, gray, moderately hard to hard, crypto crystalline, blocky, translucent,
slightly transparent, recrystallization, vuggy, chalky, marly in part, pyritic, dolomitic in part, with pure
calcite crystals nodules anhydrite with brawn siltstone, no visible porosity.
From (941-962) m MD No Return
Bad Return from 941m to 945m, No Samples at Shaker
Blind Drill with Water from Depth 945m to 962m.
2- Lithology description below from kick off point for side track @898m.
Top of Avanah Dense E1 @ 906m RTKB (-551.5 BMSL) Typical lagonal Pilaspi Formation
Finger
From (906-940) m MD Mainly Limestone
Limestone: White to whittles, gray, moderately hard to hard, crypto crystalline, blocky, translucent,
slightly transparent, recrystallization, vuggy, chalky, marly in part, pyritic, dolomitic in part, with pure
calcite crystals nodules anhydrite with brawn siltstone, no visible porosity.
13
FINAL WELL REPORT
KAR COMPANY DRILLING NEW WELLS
KHURMALA DOME FIELD WELL NO: KDN-16 (K-442)
FIELD DIVISION WELL LOCATION (SX)
14
FINAL WELL REPORT
KAR COMPANY DRILLING NEW WELLS
KHURMALA DOME FIELD WELL NO: KDN-16 (K-442)
FIELD DIVISION WELL LOCATION (SX)
15
FINAL WELL REPORT
KAR COMPANY DRILLING NEW WELLS
KHURMALA DOME FIELD WELL NO: KDN-16 (K-442)
FIELD DIVISION WELL LOCATION (SX)
12 ¼"
2m From 632m to 887m
Wet & Dry samples
8 ½"
2m From 886m to 962m
Wet & Dry samples
8 ½"
Wet & Dry samples 2m From 918m to 1089m
(Side track)
16
FINAL WELL REPORT
KAR COMPANY DRILLING NEW WELLS
KHURMALA DOME FIELD WELL NO: KDN-16 (K-442)
FIELD DIVISION WELL LOCATION (SX)
K-442
K-306 K-439
Formation
SS Formation SS Formation SS
tops
Formations MSL Tops MSL Tops MSL
GL: 345 m
(M) GL:354, (M) GL:332 (M)
RTKB:354.5
RTKB 359 RTKB: 338
m SS m SS
Rock Unit m RTKB m RTKB m RTKB m SS MSL
MSL MSL
17
FINAL WELL REPORT
KAR COMPANY DRILLING NEW WELLS
KHURMALA DOME FIELD WELL NO: KDN-16 (K-442)
FIELD DIVISION WELL LOCATION (SX)
885-887 0.009 82 - - - - - - - -
887-902 0.0069 287 39 10 Tr Tr - - - -
902-906 0.186 1504 159 56 28 19 14 18 - -
907-940 0.86 6074 493 155 54 41 19 27 - -
978-980 1.51 9618 781 261 83 69 29 40 - -
998-1000 17.2 85115 8725 2191 581 334 125 194 - -
1038-1047 0.067 23 - - - - - - - -
1065-1089 0.24 1025 100 33 21 17 15 20 - -
18
FINAL WELL REPORT
KAR COMPANY DRILLING NEW WELLS
KHURMALA DOME FIELD WELL NO: KDN-16 (K-442)
FIELD DIVISION WELL LOCATION (SX)
No core samples.
19
FINAL WELL REPORT
KAR COMPANY DRILLING NEW WELLS
KHURMALA DOME FIELD WELL NO: KDN-16 (K-442)
FIELD DIVISION WELL LOCATION (SX)
3. Drilling Information
3.1. Drilling Operation Summary:
3.1.1. First hole 17 1/2" hole interval (000-410m RTKB)
The hole was drilled from 12m to 410 m (RTKB) with 17 ½" bit to the middle Fars formation using
FWB mud density (1.02g/cc.-1.10 g/cc.) with problem of tight hole while new connection and tripping.
After reaming and conditioning mud 13 3/8" casing was run to the depth 407 m, and cemented to the
surface with one slurry successfully, by using bottom and top plugs and pumping 273 bbl class G
cement slurry with density 1.8 gm/cc, WOC and working on the well head (cutting & levelling of 13
3/8” casing) Installed 13 5/8" -5000 psi casing head housing thread type (BTC) Installed BOPs and
pressure tested with 2000 psi.
20
FINAL WELL REPORT
KAR COMPANY DRILLING NEW WELLS
KHURMALA DOME FIELD WELL NO: KDN-16 (K-442)
FIELD DIVISION WELL LOCATION (SX)
drilling with MWD tools. While side track drilling at depth 941 observed total loss tried with LCM
not succeed continued blind drilling to 1089m TD, after clean and circulate the hole performed wire
line logging then run in hole OEDP and performed three diesel bentonite plugs and two thixotropic
cement plugs to control the loss not succeed, finally 7’’ casing was run to 1085.5m
7’’ casing cemented with two slurries (lead and tail) using 64bbl of 1.8 g/cc with loss materials as lead
and 86bbl of 1.8 g/cc as tail. WOC, cut and levelled 7’’ casing then installed 11’’ 5000psi tubing head
spool on 13 5/8’’ 5000 psi casing head spool. Installed 13 5/8’’ BOPs and pressure tested with 2500
psi successfully, After RIH 6’’ bit and drilled out plugs performed scraping and wireline logging then
RIH final well completion and set the packer with 3500psi.
21
FINAL WELL REPORT
KAR COMPANY DRILLING NEW WELLS
KHURMALA DOME FIELD WELL NO: KDN-16 (K-442)
FIELD DIVISION WELL LOCATION (SX)
Observed tight hole (10-15 Ton) before new connections while drilling & tripping @ the interval
(477m-590m)(590m-630m)(762m-790m)(825m-847m) The tight hole was treated by continue
reaming pre any new connection & conditioning mud while reaming and before tripping.
22
FINAL WELL REPORT
KAR COMPANY DRILLING NEW WELLS
KHURMALA DOME FIELD WELL NO: KDN-16 (K-442)
FIELD DIVISION WELL LOCATION (SX)
Alkalinity 0.6 - -
Line, (Ib/bbl) - - -
Stability
- 20 1
(Volts)
Solid % 6 0.6 0
Sand % 0.3 80 98
Water % 93 0 0
Oil % 0 188000 -
Salinity (ppm) - - -
Ca++ (ppm) 800 0.5 0.3
Mud cake 1 2 0
23
FINAL WELL REPORT
KAR COMPANY DRILLING NEW WELLS
KHURMALA DOME FIELD WELL NO: KDN-16 (K-442)
FIELD DIVISION WELL LOCATION (SX)
24
FINAL WELL REPORT
KAR COMPANY DRILLING NEW WELLS
KHURMALA DOME FIELD WELL NO: KDN-16 (K-442)
FIELD DIVISION WELL LOCATION (SX)
25
FINAL WELL REPORT
KAR COMPANY DRILLING NEW WELLS
KHURMALA DOME FIELD WELL NO: KDN-16 (K-442)
FIELD DIVISION WELL LOCATION (SX)
Length
17 ½ 410 13 3/8 J-55 54.5 BTC 36 407 8 Float 407 Float 394.7
12 ¼ 887 9 5/8 J55/ L-80 43.5/ 40 BTC 77 884.5 10 Float 884 Float 872
26
FINAL WELL REPORT
KAR COMPANY
DRILLING NEW WELLS
KHURMALA DOME FIELD
WELL NO: KDN-16 (K-442)
FIELD DIVISION
WELL LOCATION (SX)
Additives
Casing depth
Pressure
Size (in)
Size (in)
Casing
Hole
(m)
Slurry Disp. Cement Cement Remark
Slurry Percentage Cement
Type Volume Sp.gr Volume Return, Top
(sp.gr) Sack (SX)
Bump
Press
Type By
Final
Plug
(bbl) (bbl) (bbl) (m) Initial
Weight/Vol Press
No loss while
17 ½ 13 3/8 407 Class G 1.8 273 Deformer 0.087 gal/bbl 1182 1.10 201 30 surface 190 1100 1600
cementing
Deformer
0.083 gal/bbl
No loss while
12 1/4 95/8 884 Class G 1.8 211 1.56 Ib/bbl 876 1.3 204 20 surface 200 1000 1400
Dispersant cementing
21.7 Ib/bbl
NACL salt
Deformer
0.095 gal/ bbl
Dispersant 6.278 Ib/bbl
FLAC 1.345Ib/bbl
Lead Spacer return
1.9 64 305 1.03 134 No 840 200 1200 1600
class G on shaker
Gas tight 9.542 gal/bbl
latex
8 1/2 7 1085 HCS Agent 0.954 gal/bbl
Deformer
0.097 gal/bbl
Tail Cement return
1.9 84 1.593 Ib/bbl 406 1.03 105 25 surface 100 1150 2200
class G Dispersant to surface
0.455 Ib/bbl
Retarder
27
FINAL WELL REPORT
KAR COMPANY
DRILLING NEW WELLS
KHURMALA DOME FIELD
WELL NO: KDN-16 (K-442)
FIELD DIVISION
WELL LOCATION (SX)
Slurry Slurry
No. Date Job Type Interval (m) Volume, Density, Cement Type Reason Remark
m3 gm/cc
Kick off To perform
1 17/08/2017 plug 873-907 14 1.9 Class G sidetrack -
(Back plug) drilling
Diesel+ To seal off
2 31/08/2017 926-934 40 1.7 - Not succeeded
Bentonite the lost zone
Thixotropic
To seal off
5 03/09/2017 cement 926-934 70 1.7 Class G Not succeeded
the lost zone
plug
Hole Depth
Casing Mud Pressure Time
Size Result Remarks
Size (in) Top Bottom sp.gr (psi) (min)
(in)
Tested
by
17 ½ 13 3/8 surface 407 1.10 1400 15 OK
cement
unit
Tested
by
12 ¼ 9 5/8 surface 884.5 1.32 2500 15 OK
cement
unit
Tested
by
8½ 7 surface 1089 1.01 2500 15 OK
cement
unit
28
FINAL WELL REPORT
KAR COMPANY
DRILLING NEW WELLS
KHURMALA DOME FIELD
WELL NO: KDN-16 (K-442)
FIELD DIVISION
WELL LOCATION (SX)
Flow
BHA BIT D.OUT METER SPP
BIT TYPE MADE BIT SIZE IADC JETS SN T.REV BIT hrs ROP Rate
RUN# NO (m) Drilled psi
L/Min
1 TCI Varco 1 17.5 415 4x18/32 D216959 18 410 N/A 108 4 2600 400
2 TCI ST 2 12.25 447 4x32 P44394 433 23 51947 10.06 2.29 496-583 129-358
4 PDC Reed 3 12.25 S222 6x15+1x14 E159678 887 454 375955 53 8.57 359-631 2561048
5 PDC NOV 4 8.5 437 3x16 D183177 Drill Cement
6 PDC NOV 4RR 8.5 437 3x16 D183177 Scraping
7 TCI NOV 6 8.5 437 Open D183177 Lost In Well @ 962m.
8 - - - - - - - Fishing
9 RB NOV 7 8.5 517 Open D174792 Tag and Clean Top of Fish
10 - - - - - - - 8" Magnet
11 - - - - - - - Take Imprint For Top of Fish
12 - - - - - - - Fishing
13 - - - - - - - Fishing
14 - - - - - - - Fishing
15 - - - - - - - Fishing
16 RB NOV 7RR 8.5 517 Open D174792 Drill Cement
17 RB NOV 7RR2 8.5 517 Open D174792 907 20 351758 51.25 0.54 326-613 631-940
535-
18 TCI NOV 8 8.5 M422 3x14+1x13 E206844 1089 182 418814 25.92 9.59 325-406
1001
19 TCI N/A 9 8.5 517 OPEN D174792 Clean Hole
20 TCI N/A 9RR 8.5 517 OPEN D174792 Clean Hole
21 TCI N/A 9RR2 8.5 517 OPEN D174792 Clean Hole
22 TCI N/A 10 6 PM1410 OPEN XR20TPS Drill DV
23 TCI N/A 10RR 6 PM1410 OPEN XR20TPS Scraping
29
FINAL WELL REPORT
KAR COMPANY
DRILLING NEW WELLS
KHURMALA DOME FIELD
WELL NO: KDN-16 (K-442)
FIELD DIVISION
WELL LOCATION (SX)
30
FINAL WELL REPORT
KAR COMPANY
DRILLING NEW WELLS
KHURMALA DOME FIELD
WELL NO: KDN-16 (K-442)
FIELD DIVISION
WELL LOCATION (SX)
Depth
Hole Mud Wellhead & Pressure
TD Time (Min) Result Remarks
Size (in) gm/cc Bop Stack (Psi.)
(m)
13 5/8" 10K
17 ½ 410 1.02 Annular 1500 15 OK Tested by water using rig pump
preventer
13 5/8" 10K Tested by water using cup type
17 ½ 410 1.02 1500 15 OK
Pipe Ram tester and rig pump
13 5/8" 10K Tested by water using rig pump
17 ½ 410 1.02 1500 15 OK
Blind Ram
11" 5K Casing OK Tested by water using small hand
12 ¼ 887 1.32 2000 15
Head Spool pump
12 ¼ 1.32 13 5/8" Annular OK Tested by water using rig pump
887 1500 15
preventer
12 ¼ 1.32 OK Tested by water using cup type
887 10K Pipe Ram 1500 15
tester and rig pump
12 ¼ 887 1.32 10K Blind Ram 1500 15 OK Tested by water using rig pump
11" 5K Tubing 15 OK Tested by water using small hand
8½ 1089 1.05 2000
Head spool pump
8½ 13 5/8’’ Annular 1500 15 OK Tested by water using rig pump
1089 1.05
preventer
8½ 1500 15 OK Tested by water using cup type
1089 1.03 10K Pipe Ram
tester and rig pump
8 ½’’ 1089 1.03 10K Blind Ram 1500 15 OK Tested by water using rig pump
31
FINAL WELL REPORT
KAR COMPANY
DRILLING NEW WELLS
KHURMALA DOME FIELD
WELL NO: KDN-16 (K-442)
FIELD DIVISION
WELL LOCATION (SX)
32
FINAL WELL REPORT
KAR COMPANY
DRILLING NEW WELLS
KHURMALA DOME FIELD
WELL NO: KDN-16 (K-442)
FIELD DIVISION
WELL LOCATION (SX)
Table 3.13: Drilling and Well Completion Time Analysis (Productive Time)
Drill. out Cement (csg) 2.5 6.5 3.25 12.25 0.510416667 0.66%
Test Bop´s & CSG shoe 7.25 12.75 23.5 43.5 1.8125 2.33%
Pick Up/Lay Down DP´S,
21.5 11.5 46.5 79.5 3.3125 4.26%
DCS , Kelly
Deviation Survey (TOTCO) 1 6.5 5 12.5 0.520833333 0.67%
33
FINAL WELL REPORT
KAR COMPANY
DRILLING NEW WELLS
KHURMALA DOME FIELD
WELL NO: KDN-16 (K-442)
FIELD DIVISION
WELL LOCATION (SX)
Table 3.14: Drilling and Well Completion Time Analysis (Non-Productive Time)
34
FINAL WELL REPORT
KAR COMPANY
DRILLING NEW WELLS
KHURMALA DOME FIELD
WELL NO: KDN-16 (K-442)
FIELD DIVISION
WELL LOCATION (SX)
35
FINAL WELL REPORT
KAR COMPANY
DRILLING NEW WELLS
KHURMALA DOME FIELD
WELL NO: KDN-16 (K-442)
FIELD DIVISION
WELL LOCATION (SX)
36
FINAL WELL REPORT
KAR COMPANY
DRILLING NEW WELLS
KHURMALA DOME FIELD
WELL NO: KDN-16 (K-442)
FIELD DIVISION
WELL LOCATION (SX)
37
FINAL WELL REPORT
KAR COMPANY
DRILLING NEW WELLS
KHURMALA DOME FIELD
WELL NO: KDN-16 (K-442)
FIELD DIVISION
WELL LOCATION (SX)
38
FINAL WELL REPORT
KAR COMPANY
DRILLING NEW WELLS
KHURMALA DOME FIELD
WELL NO: KDN-16 (K-442)
FIELD DIVISION
WELL LOCATION (SX)
4. Formation Evaluation
4.1. Introduction
Well K- 442 (KDN-16) is a vertical well drilled by GYP Company on behalf of KAR Group in
Khurmala Field. The objective of the well was to evaluate, test and complete the well as an Oil
producer from Tertiary reservoir.
The objective of the formation evaluation is to get following information:-
Petrophysical analyses.
Estimate formation tops.
Stratigraphic and Structural analyses.
Geometry and deviation of the well.
4.2. Abbreviations of Wireline Logging Tools
Table 4.2: Wireline Logging Summary for 12 1/4" (Open Hole) Section
39
FINAL WELL REPORT
KAR COMPANY
DRILLING NEW WELLS
KHURMALA DOME FIELD
WELL NO: KDN-16 (K-442)
FIELD DIVISION
WELL LOCATION (SX)
4.3.2. Casing Section 9 5/8"
Table 4.3: Wireline Logging Summary for 9 5/8" (Cased Hole) Section
Table 4.4: Wireline Logging Summary for 8.5" (Open Hole) Section
Table 4.5: Wireline Logging Summary for 7" (Cased Hole) Section
41
FINAL WELL REPORT
KAR COMPANY
DRILLING NEW WELLS
KHURMALA DOME FIELD
WELL NO: KDN-16 (K-442)
FIELD DIVISION
WELL LOCATION (SX)
Figure 4.1: location of SX well on the top of Avanah Dense formation Map
42
FINAL WELL REPORT
KAR COMPANY
DRILLING NEW WELLS
KHURMALA DOME FIELD
WELL NO: KDN-16 (K-442)
FIELD DIVISION
WELL LOCATION (SX)
43
FINAL WELL REPORT
KAR COMPANY
DRILLING NEW WELLS
KHURMALA DOME FIELD
WELL NO: KDN-16 (K-442)
FIELD DIVISION
WELL LOCATION (SX)
Figure 4.3: horizontal correlation between wells (K-442, K-306 and K-153)
44
FINAL WELL REPORT
KAR COMPANY
DRILLING NEW WELLS
KHURMALA DOME FIELD
WELL NO: KDN-16 (K-442)
FIELD DIVISION
WELL LOCATION (SX)
Avanah Losses
Dense
0.1 0.46 Limestone
zone
Avanah Limestone, Vugs and
Porous
0.22 0.18
dolomite fractures
Vugs and
Khurmala A 0.27 0.28 Massive dolomite
fractures
Table 4.9: Wireline Logging Summary log evaluation for 9 5/8" (Cased Hole)
Section
Wireline Logging Summary log evaluation for 9 5/8" (Cased Hole) Section
Log Type Date Survey Interval (m) Quality of the log
Bad cement
40-95
Good cement
95-210
GR, CCL, & Medium cement
7-AUG-2017 210-280
CBL/VDL Good to medium
280-875
cement
Table 4.10: Wireline Logging Summary log evaluation for 7" (Cased Hole) Section
Wireline Logging Summary log evaluation for 7" (Cased Hole) Section
45
FINAL WELL REPORT
KAR COMPANY
DRILLING NEW WELLS
KHURMALA DOME FIELD
WELL NO: KDN-16 (K-442)
FIELD DIVISION
WELL LOCATION (SX)
5. Petroleum Engineering
5.1. Final Well Sketch
46
FINAL WELL REPORT
KAR COMPANY
DRILLING NEW WELLS
KHURMALA DOME FIELD
WELL NO: KDN-16 (K-442)
FIELD DIVISION
WELL LOCATION (SX)
47
FINAL WELL REPORT
KAR COMPANY
DRILLING NEW WELLS
KHURMALA DOME FIELD
WELL NO: KDN-16 (K-442)
FIELD DIVISION
WELL LOCATION (SX)
48
FINAL WELL REPORT
KAR COMPANY
DRILLING NEW WELLS
KHURMALA DOME FIELD
WELL NO: KDN-16 (K-442)
FIELD DIVISION
WELL LOCATION (SX)
Changed choke to 64. Pressure on TBG 150 – 170 psi. cont. Take samples analyzed by KAR
(API = 33.9 , w = 0.1)
Changed choke to 48. Continue well cleaning .pressure on TBG 230 psi.
Choke @ 32 pressures 350psi.
Continue flowing the well .with choke size 64. Pressure on TBG160 psi.
49
FINAL WELL REPORT
KAR COMPANY
DRILLING NEW WELLS
KHURMALA DOME FIELD
WELL NO: KDN-16 (K-442)
FIELD DIVISION
WELL LOCATION (SX)
50
FINAL WELL REPORT
KAR COMPANY
DRILLING NEW WELLS
KHURMALA DOME FIELD
WELL NO: KDN-16 (K-442)
FIELD DIVISION
WELL LOCATION (SX)
5.5. Acidizing
Acid Job Data:
51
FINAL WELL REPORT
KAR COMPANY
DRILLING NEW WELLS
KHURMALA DOME FIELD
WELL NO: KDN-16 (K-442)
FIELD DIVISION
WELL LOCATION (SX)
K-442 (KDN-16)
01-02-03-04/11/2017
0 345 48.611
0 345 48.667
0 345 48.789
1163.80069 @ 1147.26 @ Datum
3198.78 975 345 630
Datum Level Level
WHCIP (psig ) WHFP (psig) WHCIP (barg) WHFP (barg) WHFT (°F) WHFT (°C) BHCIP (barg) BHFP ( Barg)
Well Head Data
378 309 26.07 22 109.43 43 80.3 79.12
52
FINAL WELL REPORT
KAR COMPANY
DRILLING NEW WELLS
KHURMALA DOME FIELD
WELL NO: KDN-16 (K-442)
FIELD DIVISION
WELL LOCATION (SX)
29-Oct-17 32 308.00 308.00 119.90 20 1461.50 388.37 294.6 3.1 6.90 0.00 32.70 0.971
30-Oct-17 48 300.00 300.00 172.90 12 2149.70 559.32 297 3.5 4.00 0.00 31.00 0.972
30-Oct-17 64 283.90 283.90 223.80 11 3901.10 757.16 242 5.4 5.90 0.00 31.30 0.974
31-Oct-17 96 258.40 258.40 235.70 12 6400.80 997.97 207 6.1 6.00 0.00 31.20 0.973
11+1:13/1/2017 128 264.00 264.00 252.40 11 6908.00 1015.00 203 7.0 7.30 0.00 31.30 0.975
53
FINAL WELL REPORT
KAR COMPANY
DRILLING NEW WELLS
KHURMALA DOME FIELD
WELL NO: KDN-16 (K-442)
FIELD DIVISION
WELL LOCATION (SX)
Monitoring the crew during work, and make sure they all wearing
PPE (coverall, safety helmets, safety boots and goggles, and coveralls, H2S personal
boot, helmet, safety detector should be held at the rig floor, cellar, and mud tank.
goggles, personal gas There was no special plastic coverall for chemical area.
detector, chemical No one was allowed to work at high areas without wearing body
1 mixing mask and Available harness to prevent falling injuries.
plastic coverall, Ear plugs should be worn near high voices areas, such as near
welding mask, body generators and pumps.
harness, gloves, ear KAR crew did not have proper night shift PPE, they should wear
plugs) reflective coveralls, that be visual at night and didn’t have H2S
Detector
54
FINAL WELL REPORT
KAR COMPANY
DRILLING NEW WELLS
KHURMALA DOME FIELD
WELL NO: KDN-16 (K-442)
FIELD DIVISION
WELL LOCATION (SX)
Recommendations:
Provide night shift reflective coveralls for KAR staff, to prevent accidents at night.
Schedule fire extinguishers check every 6 months, should be sent to an expert company.
Should provide enough breathing apparatuses, for all the staff.
H2S detector for the crew.
Should put more HSE warning signs around the location.
6.3. Observation and Cases:
H2S Unsolved There was no rescue team and lack of H2S drill
1
Water and mud pits, The pits were barricaded by a barricading tape,
2 were not properly Unsolved while it should have been barricaded by a suitable
barricaded fence, that protect the crew from falling into them
Not enough warning there were few warning signs, but they were not
3 Unsolved
signs enough
Each location need special pit for dumping waste
Dumping pit Unsolved
4 contaminated liquids
55
FINAL WELL REPORT
KAR COMPANY
DRILLING NEW WELLS
KHURMALA DOME FIELD
WELL NO: KDN-16 (K-442)
FIELD DIVISION
WELL LOCATION (SX)
56
FINAL WELL REPORT
KAR COMPANY
DRILLING NEW WELLS
KHURMALA DOME FIELD
WELL NO: KDN-16 (K-442)
FIELD DIVISION
WELL LOCATION (SX)
7. Appendices:
7.1. Appendix P (Casing Tallies)
13 3/8" J55-Casing (54.5 ppf) ID OF J55 (54.5 ppf) = 12.615 Capacity of J55 Casing (bbl/ft) = 0.15459
57
FINAL WELL REPORT
KAR COMPANY
DRILLING NEW WELLS
KHURMALA DOME FIELD
WELL NO: KDN-16 (K-442)
FIELD DIVISION
WELL LOCATION (SX)
7.1.2. 9 5/8" Casing Tally:
58
FINAL WELL REPORT
KAR COMPANY
DRILLING NEW WELLS
KHURMALA DOME FIELD
WELL NO: KDN-16 (K-442)
FIELD DIVISION
WELL LOCATION (SX)
33 33 L-80 11.66 0.122 11.54 375.65 508.85
34 34 L-80 11.51 0.122 11.39 387.04 497.46
35 35 L-80 11.46 0.122 11.34 398.38 486.12
36 36 L-80 11.67 0.122 11.55 409.93 474.57
37 37 L-80 11.73 0.122 11.61 421.54 462.96
38 38 J-55 11.71 0.122 11.59 433.12 451.38
39 39 J-55 11.69 0.122 11.57 444.69 439.81
40 40 J-55 11.62 0.122 11.50 456.19 428.31
41 41 J-55 11.69 0.122 11.57 467.76 416.74
42 42 J-55 11.69 0.122 11.57 479.33 405.17
43 43
© J-55 11.43 0.122 11.31 490.63 393.87
44 44 J-55 11.63 0.122 11.51 502.14 382.36
45 45 J-55 11.57 0.122 11.45 513.59 370.91
46 46 J-55 11.46 0.122 11.34 524.93 359.57
47 47 J-55 11.57 0.122 11.45 536.38 348.12
48 48 J-55 11.63 0.122 11.51 547.88 336.62
49 49 J-55 11.63 0.122 11.51 559.39 325.11
50 50 J-55 11.58 0.122 11.46 570.85 313.65
51 51 J-55 11.62 0.122 11.50 582.35 302.15
52 52
© J-55 11.63 0.122 11.51 593.86 290.64
53 53 J-55 11.52 0.122 11.40 605.25 279.25
54 54 J-55 11.62 0.122 11.50 616.75 267.75
55 78 J-55 11.72 0.122 11.60 628.35 256.15
56 56 J-55 11.56 0.122 11.44 639.79 244.71
57 57 J-55 11.51 0.122 11.39 651.18 233.32
58 58 J-55 11.43 0.122 11.31 662.48 222.02
59 59 J-55 11.40 0.122 11.28 673.76 210.74
60 60 J-55 11.55 0.122 11.43 685.19 199.31
61 61 J-55 11.62 0.122 11.50 696.69 187.81
62 62 J-55 11.10 0.122 10.98 707.67 176.83
63 63
© J-55 11.63 0.122 11.51 719.17 165.33
64 64 J-55 11.63 0.122 11.51 730.68 153.82
65 65 J-55 11.71 0.122 11.59 742.27 142.23
66 66 J-55 11.70 0.122 11.58 753.85 130.65
67 67 J-55 11.61 0.122 11.49 765.34 119.16
68 68 J-55 11.55 0.122 11.43 776.76 107.74
69 69
© J-55 11.57 0.122 11.45 788.21 96.29
70 70 J-55 11.64 0.122 11.52 799.73 84.77
71 71 J-55 11.62 0.122 11.50 811.23 73.27
72 72 J-55 11.53 0.122 11.41 822.64 61.86
73 73 J-55 11.54 0.122 11.42 834.05 50.45
74 74
© J-55 11.49 0.122 11.37 845.42 39.08
75 75 J-55 11.62 0.122 11.50 856.92 27.58
76 76
© J-55 11.40 0.122 11.28 868.20 16.30
77 77 J-55 11.73 0.122 11.61 879.81 4.69
78 Pup-Joint J-55 5.97 0.122 5.85 885.65 -1.15
59
FINAL WELL REPORT
KAR COMPANY
DRILLING NEW WELLS
KHURMALA DOME FIELD
WELL NO: KDN-16 (K-442)
FIELD DIVISION
WELL LOCATION (SX)
7.1.3. 7" Casing tally
60
FINAL WELL REPORT
KAR COMPANY
DRILLING NEW WELLS
KHURMALA DOME FIELD
WELL NO: KDN-16 (K-442)
FIELD DIVISION
WELL LOCATION (SX)
39 57 11.91 0.115 11.80 450.54 634.96
40 56 11.72 0.115 11.61 462.15 623.36
41 55 11.80 0.115 11.69 473.83 611.67
42 54 11.81 0.115 11.70 485.53 599.98
43 53 © 11.79 0.115 11.68 497.20 588.30
44 52 11.26 0.115 11.15 508.35 577.16
45 51 11.51 0.115 11.40 519.74 565.76
46 50 11.48 0.115 11.37 531.11 554.40
47 49 11.51 0.115 11.40 542.50 543.00
48 48 11.42 0.115 11.31 553.81 531.70
49 47 11.52 0.115 11.41 565.21 520.29
50 46 11.24 0.115 11.13 576.34 509.17
51 45 11.51 0.115 11.40 587.73 497.77
52 44 © 11.52 0.115 11.41 599.14 486.37
53 43 11.22 0.115 11.11 610.24 475.26
54 42 11.32 0.115 11.21 621.45 464.06
55 41 11.42 0.115 11.31 632.75 452.75
56 40 11.46 0.115 11.35 644.10 441.41
57 39 11.53 0.115 11.42 655.51 429.99
58 38 11.45 0.115 11.34 666.85 418.66
59 37 11.32 0.115 11.21 678.05 407.45
60 36 11.52 0.115 11.41 689.46 396.05
61 35 11.48 0.115 11.37 700.82 384.68
62 34 11.37 0.115 11.26 712.08 373.43
63 33 © 11.50 0.115 11.39 723.46 362.04
64 32 11.43 0.115 11.32 734.78 350.73
65 31 11.46 0.115 11.35 746.12 339.38
66 30 11.43 0.115 11.32 757.44 328.07
67 29 11.46 0.115 11.35 768.78 316.72
68 28 11.32 0.115 11.21 779.99 305.52
69 27 © 11.52 0.115 11.41 791.39 294.11
70 26 11.52 0.115 11.41 802.80 282.71
71 25 11.47 0.115 11.36 814.15 271.35
72 24 11.43 0.115 11.32 825.47 260.04
73 23 11.44 0.115 11.33 836.79 248.71
74 22 © 11.42 0.115 11.31 848.10 237.41
75 21 11.41 0.115 11.30 859.39 226.11
76 20 © 11.43 0.115 11.32 870.71 214.80
77 19 11.17 0.115 11.06 881.76 203.74
78 18 11.42 0.115 11.31 893.07 192.44
79 17 11.45 0.115 11.34 904.40 181.10
80 16 11.52 0.115 11.41 915.81 169.70
81 15 11.51 0.115 11.40 927.20 158.30
82 14 11.51 0.115 11.40 938.60 146.91
83 13 11.43 0.115 11.32 949.91 135.59
84 12 11.52 0.115 11.41 961.32 124.19
85 11 11.53 0.115 11.42 972.73 112.77
86 10 11.72 0.115 11.61 984.34 101.17
87 9 11.67 0.115 11.56 995.89 89.61
88 8 11.90 0.115 11.79 1007.68 77.82
89 7 11.47 0.115 11.36 1019.03 66.47
90 6 11.42 0.115 11.31 1030.34 55.16
91 5 11.46 0.115 11.35 1041.68 43.82
92 4 11.42 0.115 11.31 1052.99 32.51
93 3 11.52 0.115 11.41 1064.39 21.11
94 2 11.42 0.115 11.31 1075.70 9.80
95 1 11.32 0.115 11.21 1086.90 -1.40
(Stick Up)
61
FINAL WELL REPORT
KAR COMPANY
DRILLING NEW WELLS
KHURMALA DOME FIELD
WELL NO: KDN-16 (K-442)
FIELD DIVISION
WELL LOCATION (SX)
7.1.4. 4 1/2" TBG Tally
62
FINAL WELL REPORT
KAR COMPANY
DRILLING NEW WELLS
KHURMALA DOME FIELD
WELL NO: KDN-16 (K-442)
FIELD DIVISION
WELL LOCATION (SX)
38 4 1/2" Vam Top - L-80 , 11.6 Tubing Joint 26 9.07 733.000 251.060
39 4 1/2" Vam Top - L-80 , 11.6 Tubing Joint 27 9.13 723.870 260.190
40 4 1/2" Vam Top - L-80 , 11.6 Tubing Joint 28 9.18 714.690 269.370
41 4 1/2" Vam Top - L-80 , 11.6 Tubing Joint 29 8.92 705.770 278.290
42 4 1/2" Vam Top - L-80 , 11.6 Tubing Joint 30 8.82 696.950 287.110
43 4 1/2" Vam Top - L-80 , 11.6 Tubing Joint 31 8.73 688.220 295.840
44 4 1/2" Vam Top - L-80 , 11.6 Tubing Joint 32 9.17 679.050 305.010
45 4 1/2" Vam Top - L-80 , 11.6 Tubing Joint 33 8.94 670.110 313.950
46 4 1/2" Vam Top - L-80 , 11.6 Tubing Joint 34 9.09 661.020 323.040
47 4 1/2" Vam Top - L-80 , 11.6 Tubing Joint 35 8.69 652.330 331.730
48 4 1/2" Vam Top - L-80 , 11.6 Tubing Joint 36 9.07 643.260 340.800
49 4 1/2" Vam Top - L-80 , 11.6 Tubing Joint 37 8.93 634.330 349.730
50 4 1/2" Vam Top - L-80 , 11.6 Tubing Joint 38 9.18 625.150 358.910
51 4 1/2" Vam Top - L-80 , 11.6 Tubing Joint 39 9.09 616.060 368.000
52 4 1/2" Vam Top - L-80 , 11.6 Tubing Joint 40 9.06 607.000 377.060
53 4 1/2" Vam Top - L-80 , 11.6 Tubing Joint 41 9.25 597.750 386.310
54 4 1/2" Vam Top - L-80 , 11.6 Tubing Joint 42 9.17 588.580 395.480
55 4 1/2" Vam Top - L-80 , 11.6 Tubing Joint 43 9.08 579.500 404.560
56 4 1/2" Vam Top - L-80 , 11.6 Tubing Joint 44 9.13 570.370 413.690
57 4 1/2" Vam Top - L-80 , 11.6 Tubing Joint 45 8.94 561.430 422.630
58 4 1/2" Vam Top - L-80 , 11.6 Tubing Joint 46 9.15 552.280 431.780
59 4 1/2" Vam Top - L-80 , 11.6 Tubing Joint 47 9.1 543.180 440.880
60 4 1/2" Vam Top - L-80 , 11.6 Tubing Joint 48 8.57 534.610 449.450
61 4 1/2" Vam Top - L-80 , 11.6 Tubing Joint 49 8.95 525.660 458.400
62 4 1/2" Vam Top - L-80 , 11.6 Tubing Joint 50 8.91 516.750 467.310
63 4 1/2" Vam Top - L-80 , 11.6 Tubing Joint 51 9.11 507.640 476.420
64 4 1/2" Vam Top - L-80 , 11.6 Tubing Joint 52 9.01 498.630 485.430
65 4 1/2" Vam Top - L-80 , 11.6 Tubing Joint 53 9.02 489.610 494.450
66 4 1/2" Vam Top - L-80 , 11.6 Tubing Joint 54 8.9 480.710 503.350
67 4 1/2" Vam Top - L-80 , 11.6 Tubing Joint 55 8.93 471.780 512.280
68 4 1/2" Vam Top - L-80 , 11.6 Tubing Joint 56 8.94 462.840 521.220
69 4 1/2" Vam Top - L-80 , 11.6 Tubing Joint 57 9.1 453.740 530.320
70 4 1/2" Vam Top - L-80 , 11.6 Tubing Joint 58 9 444.740 539.320
71 4 1/2" Vam Top - L-80 , 11.6 Tubing Joint 59 8.98 435.760 548.300
72 4 1/2" Vam Top - L-80 , 11.6 Tubing Joint 60 8.97 426.790 557.270
73 4 1/2" Vam Top - L-80 , 11.6 Tubing Joint 61 8.98 417.810 566.250
74 4 1/2" Vam Top - L-80 , 11.6 Tubing Joint 62 8.96 408.850 575.210
75 4 1/2" Vam Top - L-80 , 11.6 Tubing Joint 63 8.65 400.200 583.860
76 4 1/2" Vam Top - L-80 , 11.6 Tubing Joint 64 9 391.200 592.860
77 4 1/2" Vam Top - L-80 , 11.6 Tubing Joint 65 8.93 382.270 601.790
78 4 1/2" Vam Top - L-80 , 11.6 Tubing Joint 66 8.94 373.330 610.730
79 4 1/2" Vam Top - L-80 , 11.6 Tubing Joint 67 9.02 364.310 619.750
80 4 1/2" Vam Top - L-80 , 11.6 Tubing Joint 68 8.94 355.370 628.690
81 4 1/2" Vam Top - L-80 , 11.6 Tubing Joint 69 9.05 346.320 637.740
82 4 1/2" Vam Top - L-80 , 11.6 Tubing Joint 70 9.08 337.240 646.820
83 4 1/2" Vam Top - L-80 , 11.6 Tubing Joint 71 9.05 328.190 655.870
84 4 1/2" Vam Top - L-80 , 11.6 Tubing Joint 72 8.96 319.230 664.830
85 4 1/2" Vam Top - L-80 , 11.6 Tubing Joint 73 9.17 310.060 674.000
63
FINAL WELL REPORT
KAR COMPANY
DRILLING NEW WELLS
KHURMALA DOME FIELD
WELL NO: KDN-16 (K-442)
FIELD DIVISION
WELL LOCATION (SX)
86 4 1/2" Vam Top - L-80 , 11.6 Tubing Joint 74 9.12 300.940 683.120
87 4 1/2" Vam Top - L-80 , 11.6 Tubing Joint 75 9.2 291.740 692.320
88 4 1/2" Vam Top - L-80 , 11.6 Tubing Joint 76 9.19 282.550 701.510
89 4 1/2" Vam Top - L-80 , 11.6 Tubing Joint 77 8.94 273.610 710.450
90 4 1/2" Vam Top - L-80 , 11.6 Tubing Joint 78 9.08 264.530 719.530
91 4 1/2" Vam Top - L-80 , 11.6 Tubing Joint 79 9.14 255.390 728.670
92 4 1/2" Vam Top - L-80 , 11.6 Tubing Joint 80 9.13 246.260 737.800
93 4 1/2" Vam Top - L-80 , 11.6 Tubing Joint 81 9.08 237.180 746.880
94 4 1/2" Vam Top - L-80 , 11.6 Tubing Joint 82 9.09 228.090 755.970
95 4 1/2" Vam Top - L-80 , 11.6 Tubing Joint 83 8.93 219.160 764.900
96 4 1/2" Vam Top - L-80 , 11.6 Tubing Joint 84 8.75 210.410 773.650
97 4 1/2" Vam Top - L-80 , 11.6 Tubing Joint 85 9.13 201.280 782.780
98 4 1/2" Vam Top - L-80 , 11.6 Tubing Joint 86 8.83 192.450 791.610
99 4 1/2" Vam Top - L-80 , 11.6 Tubing Joint 87 8.99 183.460 800.600
100 4 1/2" Vam Top - L-80 , 11.6 Tubing Joint 88 9.09 174.370 809.690
101 4 1/2" Vam Top - L-80 , 11.6 Tubing Joint 89 8.98 165.390 818.670
102 4 1/2" Vam Top - L-80 , 11.6 Tubing Joint 90 9.12 156.270 827.790
103 4 1/2" Vam Top - L-80 , 11.6 Tubing Joint 91 9.09 147.180 836.880
104 4 1/2" Vam Top - L-80 , 11.6 Tubing Joint 92 9.14 138.040 846.020
105 4 1/2" Vam Top - L-80 , 11.6 Tubing Joint 93 9.1 128.940 855.120
106 4 1/2" Vam Top - L-80 , 11.6 Tubing Joint 94 8.97 119.970 864.090
107 4 1/2" Vam Top - L-80 , 11.6 Tubing Joint 95 9.05 110.920 873.140
108 4 1/2" Vam Top - L-80 , 11.6 Tubing Joint 96 9 101.920 882.140
109 4 1/2" Vam Top - L-80 , 11.6 Tubing Joint 97 9.1 92.820 891.240
110 4 1/2" Vam Top - L-80 , 11.6 Tubing Joint 98 9.09 83.730 900.330
111 4 1/2" Vam Top - L-80 , 11.6 Tubing Joint 99 9 74.730 909.330
112 4 1/2" Vam Top - L-80 , 11.6 Tubing Joint 100 8.94 65.790 918.270
113 4 1/2" Vam Top - L-80 , 11.6 Tubing Joint 101 9.11 56.680 927.380
114 4 1/2" Vam Top - L-80 , 11.6 Tubing Joint 102 9.12 47.560 936.500
115 4 1/2" Vam Top - L-80 , 11.6 Tubing Joint 103 9.07 38.490 945.570
116 4 1/2" Vam Top - L-80 , 11.6 Tubing Joint 104 9.06 29.430 954.630
117 4 1/2" Vam Top - L-80 , 11.6 Tubing Joint 105 8.85 20.580 963.480
118 4 1/2" Vam Top - L-80 , 11.6 Tubing Joint 106 9.19 11.390 972.670
4 1/2" Vam Top - L-80 , 11.6 Tubing Pup
119 2.13 9.260 974.800
Joint
120 Tubing Hanger Body 9.260 974.800
121 RTKB To Tubing hanger fingers landing 9.26 0.000 984.060
64
FINAL WELL REPORT
KAR COMPANY
DRILLING NEW WELLS
KHURMALA DOME FIELD
WELL NO: KDN-16 (K-442)
FIELD DIVISION
WELL LOCATION (SX)
7.2. Appendix F
7.2.1. CPI for OH 8.5"
65
FINAL WELL REPORT
KAR COMPANY
DRILLING NEW WELLS
KHURMALA DOME FIELD
WELL NO: KDN-16 (K-442)
FIELD DIVISION
WELL LOCATION (SX)
7.3. Appendix G
7.3.1. Master Log
66
FINAL WELL REPORT
KAR COMPANY
DRILLING NEW WELLS
KHURMALA DOME FIELD
WELL NO: KDN-16 (K-442)
FIELD DIVISION
WELL LOCATION (SX)
67
FINAL WELL REPORT
KAR COMPANY
DRILLING NEW WELLS
KHURMALA DOME FIELD
WELL NO: KDN-16 (K-442)
FIELD DIVISION
WELL LOCATION (SX)
68
FINAL WELL REPORT
KAR COMPANY
DRILLING NEW WELLS
KHURMALA DOME FIELD
WELL NO: KDN-16 (K-442)
FIELD DIVISION
WELL LOCATION (SX)
69
FINAL WELL REPORT
KAR COMPANY
DRILLING NEW WELLS
KHURMALA DOME FIELD
WELL NO: KDN-16 (K-442)
FIELD DIVISION
WELL LOCATION (SX)
70
FINAL WELL REPORT
KAR COMPANY
DRILLING NEW WELLS
KHURMALA DOME FIELD
WELL NO: KDN-16 (K-442)
FIELD DIVISION
WELL LOCATION (SX)
71
FINAL WELL REPORT
KAR COMPANY
DRILLING NEW WELLS
KHURMALA DOME FIELD
WELL NO: KDN-16 (K-442)
FIELD DIVISION
WELL LOCATION (SX)
72