Professional Documents
Culture Documents
SE-04-030 Loat Test Procedure For Freefall Davit
SE-04-030 Loat Test Procedure For Freefall Davit
SE-04-030 Loat Test Procedure For Freefall Davit
No: SE-04-030
Doc.Type: Work Description
Page: 1 of 3
Author (sign): OKR Rev. date: 16.05.2011
Load test procedure for freefall
Approved (sign): EEI Rev. no: 1
Verified (sign): SFL Davit First publ.date: 21.04.2011
1 PROCESS FLOW
3 DEFINITIONS
SOLAS – Safety Of Life At Sea
LSA – Lifesaving Appliances
SE – Service Engineer
SP – Service Partner
SWL – Safe Working Load
4 RESPONSIBILITY
Service engineer /
- (“A”) Who is Accountable for the activity or decision (Owner)
Service Partner
Only one accountable per activity
Norsafe Sub
Customer /
- (“R”) Who is Responsible (Doer)
Role / area
Contractor
- (“C”) Who must be Consulted
- (“I”) Who must be Informed
Activity
load testing of LSA AR
Test equipment (water bag, steel/concrete weights, load cell etc.) to be
AR
supplied
5 WORK METHOD
1.1 Winch dynamic brake test – using water bag
TL can now be attached to the winch falls using water bag or steel/concrete weight.
Davit S.W.L x 1.1 = TL and hang the testing equipment from the fall/hook and proceed to release the brake enough so
that the TL can pass through approximately 1.5m and apply the brake.
Please bare the following in mind, when this type of load test is done it is expected that the main brake is completely
released and after the set distance has been covered it should be applied abruptly as to bring the test load to an
immediate still stand.
6 SAFETY INITIATIVE
Standard Service Engineer PPE or according to SJA, if additional risk are present.
7 REFERENCES
A list of other QHSE documents
QHSE Title
doc.no
QA-04-008 Safe Job Analysis (SJA)