Professional Documents
Culture Documents
NQ-CL4L - ユーザーズマニュアル(CC-Link編)-pages-7-12 en-GB
NQ-CL4L - ユーザーズマニュアル(CC-Link編)-pages-7-12 en-GB
NQ-CL4L - ユーザーズマニュアル(CC-Link編)-pages-7-12 en-GB
1
Before use 1
Before use
This section describes what you need to know before using the product, including an overview of the bundled
products and the NQ series.
The NQ-CL8L/CL4L/CL4A i s an IO-Link master module that acts as a remote device station for CC-Link systems and
temperature
Degree and analogue input module.
1
Before use
The NQ series is equipped with two power ports and two CC-Link BUS ports, allowing each module to be daisy-chained. In
addition, input/output modules are available for connecting general-purpose input/output devices, enabling data utilisation through reduced wiring and
communication while allowing existing devices to be used without modification.
refere IO-Link is a fieldbus-independent communication interface for sensors and actuators in accordance with the international
nce standard IEC 61131-9. IO-Link communicates one-to-one with sensors and actuators using the same conventionally
used 3-wire cable. IO-Link is a fieldbus-independent communication interface used for sensors and actuators.
Max 20 m
*3
OP-88458.
Power cable CC-Link cable IO-Link communication (cable length - max. 20 m) Sensor cable
*1 This restriction is based on the connector cable lengths in our line-up. When via terminal blocks, it depends on the number of connection units and current.
*2 Restriction due to the connector cable lengths in our line-up, in accordance with CC-Link specifications.
*3 Extendable distances depend on the individual device.
Before use
unit x 1 (Set of 10) unit x 1 (Set of 4)
(Separately for the power port OUT and CC-Link BUS OUT (Separately for the power port OUT and CC-Link BUS OUT
port. port.
(M12 waterproof cap fitted) (M12 waterproof cap fitted)
(Separately for the power port OUT and CC-Link BUS OUT
port.
(M12 waterproof cap fitted)
Power cable
1 NQ-CL8L NQ-CL8L
Before use
NQ-CL4L NQ-CL4L
NQ-CL4A NQ-CL4A
A B
CC-Link cable
NQ-CL8L NQ-CL8L
CC-Link master
NQ-CL4L NQ-CL4L
NQ-CL4A NQ-CL4A
CC-Link
rose rose
wire wire
M12 M12 Male M12 Female M12
Female Male.
A B C
no
D te
(s
up
pl
sym nam type length
e mate
m
bol e of en
rial
prod ta prop
ry
uct inf ertie
or
s
m
OP-88582. 2m
ati
A M12 f e m a l e (A-code, straight) - discrete wires on
OP-88583. 10m.
)
sy
OP-88584. 0.3m
m
bo
1-4 NQ Series User's Manual (CC-Link Edition) l
B M12 female (A-code, straight) - M12 male OP-88585. 2m
(A-code, straight). OP-88586. 10m. PVC
OP-88580. 2m
C M12 M a l e (A-code, straight) - Discrete wire
OP-88581. 10m.
D CC-Link M12 termination connector OP-88587. -
IO port cable
M12 (4-pin) connector sensor 1
Before use
When the cable is extended
NQ-CL8L
M12 male M12 female to M12 M12 female to M12 NQ-CL4L
male male
NQ-CL4A
A A
B A
C A
sensor
NQ- NQ-CL8L
NQ-CL4L
IL8P.
M12 female to M12
M12 female to M12
male
male
A A
Link master.
Other.
1 ◼ M12 Y-shaped branch connector OP-88458
Before use