Professional Documents
Culture Documents
E1091 User Manual
E1091 User Manual
User Manual
Please read this manual before using and
save this manual for future reference
General
Power Requirement 14.4DC
Load Impedance 4ohm Precautions 2
Max Power Output 60W 4
Tone Control +/-8DdB(Bass100Hz,Treble 10KHz) Panel illustration 3
Dimension Approx,192 188 105mm(D W H)
Mounting Dimension Approx,169 178 100mm(D W H)
Main menu 5
Weight Approx.2.15kg
Media player 6
DVD Deck Section
Disc Played DVD/VCD/2.0/MP3/MP4(DIVX/CD/Picture-CD) Blue tooth 7
Video System PAL/AUTO/NTSC
AV IN 8
03.MAL.6950.001.04
28 1
This unit can play the following disc only: STANDARD CONNECT
Type of disc Label on the disc Recorded material Size of disc
Sound and moving
pictures
Sound only
Do not attempt to modify the unit. ----Do not use CD with paste residue
Unauthorised modification may or ink on the surface
damage the unit.
2 27
Problem Cause/solution
Note:If any of the problem persist, consult your nearest service dealer.
Never attempt to disassemble the unit by yourself.
26 3
Mode button
Mounting Example
Eject button
Press it to select source in the A. When there is no disc in the unit,
following order: press it and the front panel will
This mounting method is used for Japanese cars.
flip down to shown the disc slit in The actual mounting method should depend on
the main unit, Insert the disc into the types of the cars.
the CD slot, and the mechanism Notes: 1.Store small articles that are not accessible
wills automatically playback the to children.
Reset button 2.Install only with the supplied screws.
Disc. 3.Installation varies depending on the
Operating the unit for the first time or type of cars and unit installed by
after replacing the car battery, you qualified technician.
B. When there is a disc in the unit,
must reset the unit. Press this button press it, the front panel will
with a pointed object (such as a automatically flip down and eject
ballpoint pen) to set the unit to initial the disc, if you don t take the Bracket
status. disc away within 5 seconds, the
Note: When errors occur on the LCD mechanism will automatically slot
display ,you can also press RESET in the disc, lock the front panel and Existing parts supplied
select radio mode. with your car
button to clear the error, It will erase
the clock setting and some
memorized functions.
Power button Installing the front panel
A. Under sleeping mode, press it to
Touch screen turn the unit on, and the unit will
Press any place on the touch screen, automatically select radio mode.
the corresponding touch menu will B. Under working mode, press it to
display on the screen under different turn the unit off .
Mode, pleas refer to corresponding
Chapter below for operation in
details. Detaching the front panel
Precautions
Remote control sensor
Sensor for the card remote commander. Do not touch the front panel connection
(For remote control version only) on the unit body, since this may result in poor
electrical contact. If dirt or dust get on the
Note: This window is used with remote contacts, wipe them with c clean ,dry cloth.
control function. Without this
function,you should ignore the
operation contents about remote
control function.
4 25
Parts List(The numbers in the list are keyed to those in the instructions.)
Setup TV
24 5
5.Parameter display
After selecting the desired mode.
you can adjust its level by pressing
Area 5 , and the corresponding ZOOM KEY
Parameter will display in this area. To set the operating modes for Dolby
Digital decoder. --In DVD VCD playing mode,
press 25 (ZOOM) key once for
b. Dynamic Range 1.5x Mode, twice for 2 x Mode.
Third time for 3 x Mode, forth
Press it to select track upward, Press
time for 1/2 mode, fifth time for
and hold it for more than 3 seconds
1/3 mode, sixth time for 1/4 mode.
to fast forward the track.
Note: No ZOOM function CD/MP3 playing
. Mode.
7.MORE:
Press it to display more menu. To set dynamic range compression
1.PLAY/PAUSE key
Press it to pause the playback, and c. Dual Mono
press it again to resume to normal 8.MODE key
Playback. Press the button to return to main menu.
2.MUTE key
Press it to cut off the sound output, 9.TA key(optional)
And appears in the LCD; Traffic program/Traffic Announcement.
Press it again to cancel the MUTE TA function on/off.
To set the stereo mode.
function.
6 23
SPDIF/PCM: b. Contrast
When the player is connected with the 10.RPT key Bluetooth
2 channels, digital stereo amplifier, Repeat function. Press it to repeat the
please select this item when the current track/chapter; Press it
playing disc is recorded in Dolby Again to repeat the title; Press it
digital or MPEG. The analog or optical The third time to repeat all; Press it
output will be modulated to 2 channels The fourth time to cancel the repeat
output by PCM. function.
Note: This function is in invalid for this
model.
b. Key 11. RDM key
Press it to play the disc in random,
c. Hue Press is again to resume normal
Playback.
22 7
USB Player
Exit the touch menu.
The unit can be connected to a USB
7.Status bar device for playing MP3/MP4/JPG files C. AUDIO SETUP
Display status of the connection through the USB cable. SPDIF/OOF:
or phone number. All the touch keys keep the same Analog or optical output port has
functions and operate in the same a. OSD Language
no output signal at all.
way as other modes, For details of
this operation, please see main a. AUDIO Out
AV IN section in Media player chapter.
8 21
a. T V Type Setup
(4)CLK
Clock display on/off, the current
Time display on LCD when CLK ON.
(5)BEEP
Keypad tones setting on/off.
20 9
7.Back
Return to main menu
Note : This function is invalid for this model
10 19
Setting CD Playback Time Stop the Playback Radio(RDS is optional) 3.PTY key
--In VCD CD mode, press 18 --In DVD mode, press 20 Press PTY key to select program type:
(GOTO) key and set the time when button to suspend the playback
you begin to play the track, and and press Play to continue.
the television will display the Press it again to stop the playback.
time --:--. Enter your desired time
by pressing number button 14 Press touch area 12 to select
(0~10+).For example, enter: programme Contents as follows:
25:00, and press 6 (ENTER ) to (A) PTY MUSIC group:
confirm. It will automatically start MULTI-ANGLE KEY 1. POP M, ROCK M.
playing the track from the point of --In DVD playing mode, press 21 2. EASY M, LIGHT M.
twenty-fifth minutes in the disc. (ANGLE key to watch the DVD 3. CLASSICS, OTHER M.
Content from different angle. 4.JAZZ, COUNTRY.
--In DVD playing mode, press 18 5. NATION M, OLDIES.
(GOTO) key once and input a 6. FOLK M.
desired track number, Then press
6 (ENTER) key to play the DVD SLOW KEY
(B) PTY SPEECH group:
from the position corresponding to 1.NEWS, AFFAIRS, INFO.
the track number selected. --In DVD/VCD playback mode, press
2. SPORT, EDUCATE, DRAMA.
22 (SLOW) key once for / slow, twice
3. CULTURE, SCIENCE, VARIED.
--In DVD playback mode, press 18 for 1/3 slow, thrice for 1/3 slow, and
4.WEATHER, FINANCE, CHILDREN.
(GOTO) key once and input a so on. When the key is pressed the
5. SOCIAL, RELIGION, PHONE IN.
Desired time to play the DVD from seventh time, it will return to normal
6. TRAVEL, LEISURE, DOCUMENT.
the position corresponding to the Playback.
1.AF key The radio will start searching
time selected. For example, press Alternative frequency tracking, The corresponding PTY information and
Note : Not applicable in Mp3 and CD
18 (GOTO) key once and the playback. radio automatically selects the Is stops when the information isfound.
television will display the time--:--:-- alternative frequency of the same if there are no PTY information, it
Enter your desired time by pressing programme with the reception. automatically switches to normal
number button 14 (0~10+). And 4 When AF is on, AF in the LCD mode.
direction button, Then press 6 With be flashing, when AF is off,
(ENTER) button, it will automatically AF in the LCD disappear. 4. APS key.
start playing the track trom the point
of your desired time in the disc. 2.TA key Pres it to start automatic scanning of
Note: No time play function for Mp3. Traffic program/Traffivc Announcement. radio stations .The unit will automa-
When TA is on, TA in the LCD will -tically pick up the station and store in
display and 10 will appear TASEEK . to area 12 . A total of 18 FM stations
After TA information os searched, and 12 AM stations will be stored.
10 will display the corresponding After all the stations are stored
Mode Switch Frequency. If no TA information station. The unit will start playing the
--Press 19 (MODE) button to is searched, NO Ta will display first station stored till the last station
Switch to radio mode or playback in the LCD and it automatically stored
Mode. switches to normal mode.
18 11
12 17
10 TV OPERATION
Volume Increasing/Decreasing On-Screa Display 5.Parameter display
During CD VCD DVD mode, After selecting the desired mode,
--Press 7 (VOL+or VOL-) button press 10 (OSD ) button. The Y ou can adjust its level by pressing
to increase or decrease the volume display shows single track Area 5 , and the corresponding
level respectively.
elapsed time ,single track parameter will display in this area.
remaining or entire disc remaining,
and the track being played and the 6.
Tuning/Selecting Tracks Select the downward channel to
content of the whole disc .
/Fast Rewind/Forward watch.
--During radio mode, continuously
Note :During Mp3 mode, only single
press 88 ( or ) button to track elapsed time is displayed in 7.
manual search a station downward OSD mode. Select the upward channel to
or upward respectively; if press and watch.
hold 88 ( or ) button for more
than 3 seconds, the radio will VOL/BAS/TRE/BAL/FED 1.SEEK key 8.MODE key
Automatically search a station Selector Press it, the unit will search
downward or upward respectively Repeatedly press 11 (SEL) automatically form VHF. When Exit the TV mode and return
until it finds a station. button to select the desired mode all the 100 channels are searched to main menu.
in the following order: and stored or when the search is
--During playback mode, press completed, auto-search will stop.
and hold 88 ( or ) button After the auto-search is finished,
to fast rewind or fast forward to the unit will select the first
reach your desired track quickly. channel as default.
momentarily pressing 88 ( or Note: selecting your desired mode, you can
) button, you can select your adjust the current mode being displayed
desired track downward or upward by using (VOL+or VOL-) buttons. When
P-EQ made is activate, press SEL button 2.MUTE key
Respectively. to select the modes. And Bass/Treble Press it to cut off the sound output,
Mode are invalid (Show as below)
and will appear in the LCD.
Press it again to cancel the MUTE
Function.
Program Playing
--During CD VCD mode ,you 3.VOL/SEL key
can set the program order to play. This key has SEL function ,
You can follow the steps below: Repeat Playing /AMS Repeatedly press it to select mode
first, press 16 (PBC) button, and During DVD mode, first, press 12
then press 9 (PGM) button, and (AMS/RPT) to repeat the current
the television displays track being played; Press it again to
programming P00:00. You can set repeat playing All the tracks.
the program order to play by pressing Pressing it the third time will cancel
14 (0~10+)button, and then press 2 the repeating function. (LCD will
toPlay. display different designs) 4.TA key (optional)
Note: program doesn t function For details, please see Media
when playingMP3. Player chapter.
16 13
-- Press 4 to select
Your desired menu. Then press
1 Power Switch 13 Random Playing 6 (ENTER) or press the play
2 Pause/Play Button Button 2 ( ) to confirm.
14 Number Button
3 Mute Button 15 Audio-setting Note: This function works in main menu
3.Insert the Battery Holder into the mode only.
4 Selecting Menu Button
16 PBC Menu Remote Control.
5 Band/System Switch
17 Subtitle-Setting Band/System Switch
6 Enter Button 18 Playing Time-Setting
-- During radio mode, press 5
7 Volume control 19 Mode Switch (BAND/SYS) to switch receiving
8 Tuning/Selecting 20 Stop/Reverse Button Band. Press and hold it, open the
Tracks/F.F/REW LOUD function.
21 Angle-Setting
9 Program Playing -- During playback mode, press
22 Slow-motion Play 5 (BAND/SYS) button to swich
10 On-Screen Display to AUTO PAL or NTSC system,
23 Setup Menu Note: Some models are not equipped with
11 Setting the Sound Press and hold it to open the LOUD
remote control. you should ignore
Characteristics 24 Menu-Display The contents about remote control. function.
12 Re peat Playing 25 Zoom-Setting
14 15