Professional Documents
Culture Documents
Arkifloor AW
Arkifloor AW
1/2
ARKIFLOOR AW
Single component, water based, modified acrylic resin floor coating
system
Mix the base and water as specified, for both standard Tools must be cleaned immediately after use with SKK
and slip prevention application. Content mixed must be Thinner.
homogenous so that there should be no hard lumps or
uneven color. Dilution with water ranges between 5-10% SAFETY PRECAUTIONS
weight ratio and may vary depending on the humidity This product contains volatile and inflammable solvents
and temperature. and must not be used near flame or welding operations.
Avoid contact with skin or eye. Any skin or eye
contamination should be washed immediately with
APPLICATION plenty of water and seek medical treatment. If
swallowed, do not induce vomiting. Contact a physician
Stain Resistance Mix immediately.
Apply two coats of Arkifloor AW over the clean The technical information given herein is of a general nature
and correct to the best of our knowledge based on laboratory
substrate by roller or brush. Prevention of material tests and professional experiences. It shall not to be construed
ponding is recommended. After admixing, Arkifloor AW as implying any guarantee of performance. Due to
should be used within its pot life or within 4 hours at unforeseeable conditions and constraints, we will not assume
20oC and 65% RH. liability for the unsuccessful use of this product. We reserve the
right to alter or modify any data given without prior notice.
Coverage When in doubt, please consult our technical department for
further information.
Per Coat 0.15 - 0.2kg/m2
Overcoating Interval 3 hrs
No. of Coats 2
Coverage
0.30-0.50kg/m2 (1st coat)
Per Coat
0.50-0.75kg/m2 (2nd coat)
Overcoating Interval 3 hrs
No. of Coats 2
PACKING STYLE
Arkifloor EH (20 kg/can)
Arkifloor AW 20 kg can
2/2