Professional Documents
Culture Documents
Spesifikasi HCR1200-DSIII
Spesifikasi HCR1200-DSIII
Spesifikasi HCR1200-DSIII
ISO9001 ISO14001
Takasaki, Yoshii Works
Certified Management System
HCR1200-DSⅢ-E1202-F1
Printed in Japan
The ultimate combination or
performance and economy.
1 2
Drilling performer, HCR1200-DSⅢ
High-produ ctivity & Durability
Drill faster and straighter with our patented HD712 drifter.
Dual damper
3 4
Maximizes operator performance with
the ultimate in drilling technology.
Newly designed economy mode
By using power-saving switch, fuel consumption is reduced during “light”
work conditions. (Maximum 30 % reduction on previous models.)
While drilling, Engine speed can be adjusted lower than power mode.
Engine speed can be selected from one of following speed.
“Light” work 1,600 min-1
1,800 min-1 New economy mode
( Have a choice from 3 types of power )
According to
rock condition 2,000 min-1
stage-3 emission control. It gives full control for easy drilling. Field proven rod changer system Rod changing lever
Thanks to advanced hydraulic and pneumatic technology,
Low-emission engine output energy can be transferred to each component with
The hydro-mechanical In-line-1 design rod changer with rotator is ①
field proven. Rod change speed is extremely fast.
minimum power loss. These systems support high
productivity.
②
①
Engine throttle control Roller rotation /
Roller slide
CAUTION Adjust the engine speed.
The diesel fuel quality greatly affects the performance and Position Ⅰ: 1,250 min-1
life of the engine. Use only clean, high quality fuel. Position Ⅱ: 1,600 min-1 ②
Position Ⅲ: 1,800 min-1 Carrier Swing in or out /
Position Ⅳ: 2,000 min-1 Rod adding or
CATERPILLAR and CAT are registered trademarks of Caterpillar Inc. Position Ⅴ: 2,200 min-1 Rod collection
5 6
Easy operation and improved – reliability
Control deck
HCR1200-DSⅢ is provided with operator
① ③
proven “triple plus one” drill control design.
② ④ FRD experienced operators will perform
their skill level from day one, with triple
hydraulic drill control and one air control
lever layout. No learning time is required.
■ Control panel ①~④
① Flushing lever
② Rotation lever
③ Feed lever
④ Percussion lever
■ Drilling Switch panel ⑤~⑪
⑤ Feed pressure control dial
⑥ Dust collector switch
⑦ Hood & Centralizer switch
⑤ ⑥ ⑦ ⑧ ⑨ ⑩ ⑪ ⑧ Anti-jamming pilot lamp
⑨ Anti-jamming switch
⑩ Mode selector switch
⑪ Grease lubrication switch
Dust collector
Slidable
suction cap
7 8
Combining performance and economy
New design comfort cab Comfortable control levers Tilt type control deck
New design cab provides large windows at the front and on the right side to maximize operator visibility.
③ ⑦
Cab is air conditioned and pressurized with air filters to keep out dust. ⑤
② ④
Air Conditioner Ventilation duct
Control panel for air conditioner
① ⑥ ③ ① Mode selector switch ⑥
② Temperature control switch
③ Internal/External air selector
switch
④ Fan switch
② ⑤ ④ ⑤ OFF switch ①
⑥ Air conditioning switch
Tilt lock release pedal.
(B) Mutual design lever for easy control.
(A)
① Oscillating lock lever
② Guide slide & Oscillating ⑧
(C)
③ Guide tilt& Guide swing Switch Panel
④ Boom lift & Boom swing ① Engine start switch
⑤ Rod changer(2 levers) ② ③ ② Engine throttle control
New design cab (Photo:Standard cab) ⑥ Horn switch ③ FM/AM Radio
Front blow Front/Rear blow Foot blow ⑦ Traveling levers ④ Air-conditioner control
⑧ Drink holder ④ panel
ROPS/FOPS Cab (Option) Operator's seat Pressure gauge installed ① ⑤ Compressor switch
⑥ Front Light switch
Hi-back operator's seat with to center pillar. ② ① ⑦ Rear Light switch
ROPS:Roll-Over Protective Structures
FOPS:Falling-Object Protective Structures fabric upholstery and arm rest, Easily checkable from ⑤⑥⑦ ⑧ ⑨ ⑧ Front window wiper
sitting position. ③ and washer switch
holds the operator in an
⑨ Upper window wiper
optimum position all day. ① Impact pressure gauge ④ and washer switch
② Feed pressure gauge ⑩
③ Rotation pressure gauge ⑩ Speaker
④ Flashing air pressure gauge
9 10
Easy Maintenance & Safety Functions.
Accessibility Walk-around, ground-level maintenance provides fast, easy upkeep or ■ For Easy maintenance & Safety equipment
For Maintenance repair. Hinged service doors provide easy access to required areas. Synthetic hose reels Wear Plate Pre cleaner for engine Air conditioner filter
Pressure gauge ports Water separator for engine Drifter lubricating oil Air filter
Access to the right side cover Hose connections Easy check and adjust for drilling
performance with centrised
The primary fuel filter separates
water mixed with fuel to prevent
This machine is equipped with an
automatic oiling type lubricator for
The air filter is separate and
removes moisture and dust from the
pressure gauge ports. trouble due to water. lubricating drifter front section. air circuit.
Access to receiver tank, hand
pump, auto grease, drilling Fan guards Travel lock plates Head guards Fire extinguisher
valve unit, pressure gauge
ports, and drains.
Access to the rear cover Folding catwalk Tool box Side door mirror Guide swing angle indicator Additional lights (70Wx2)
by pendulum
Access to engine and
compressor related filters.
Improved rearward visibility.
① ②
CAUTION
When you leave the machine, lock
2 dimensional electric angle Water tank for water injection Rear view monitoring camera Heavy duty under cover Emergency shut down
it to prevent theft or tampering. indicator system system
① Guide swing angle
② Guide tilt angle
11 12
■ Standard & Option equipment ■ Specifications
Model
Drifter
HCR1200‐DSⅢ Model
Weight & Dimensions
HCR1200‐DSⅢ
■ Dimensions
HD712 Standard Operating weight(Standard Cab) 11,900 kg
Dual damper system Standard Operating weight(ROPS/FOPS ) 11,940 kg
Reveres percussion Option Overall length 9,210 mm
Guide shell Overall width 3,355 mm
Hydraulic centralize Standard Overall width(Transportation) 2,400 mm
Sliding suction cap Standard Overall height 3,010 mm
Synthetic wear plate for carriage Option Overall height (Transportation) 2,860 mm
Synthetic hose reel Standard Drifter
Rod changer Model HD712
Rod length 12ft Standard Weight 220 kg
32H, 38R(T38) Select Number of percussion 2,300 ~ 2,500 min-1
Rod size
38H, 45R(T45) Select Number of rotation 0 ~ 190 min-1
32H, 38R(T38) Select Undercarriage
MM/MF rod
38H, 38R(T38) Select Track length 3,159 mm
Starter rod 14ft Standard Ground contact length 2,395 mm
Rotator Standard Width of shoe 330 mm
Boom Ground clearance 585 mm
Fix boom Standard Oscillating angle ±7.5°
Undercarriage
Traveling speed 0 ~ 3.2 km/h
Single shoe Standard
Gradability 57.7 % (30°)
Sprocket guard Standard
Engine
Lifting eyes for transportation Optional
Model C7
Dust collector
Type Water-cooled, Direct injection,6-cylinders,
Pre-cleaner Optional Air to air after cooled, turbo-charged, diesel
Folding bracket for pre-cleaner Optional Maker CATERPILLAR®
Exhaust shutter Optional Output 168 kW / 2,200 min-1
Sinter-lamellar filter Optional Fuel tank capacity 330 liter
Cab
Hydraulic pump
Steel cab Standard
Variable displacement piston 2
ROPS/FOPS cab Optional
Gear pump 3
Air conditioner Standard
Hydraulic oil capacity 170 liter
High-backed seat Standard
Compressor
Seat belt Optional
Model PDS265-S35C(AIRMAN)
FM/AM radio Standard
Type Screw 1-stage forced oil lubrication
Rotating light (Yellow)
Leveler
Optional
Optional
Free air delivery 7.1 m3/min ■ Drilling Coverage(mm)
Working air pressure 1.03 MPa
Side door mirror Optional
Additional lights(70Wx2) Optional
Boom ■ Horizontal drilling coverage ■ Vertical drilling coverage
Model JF325 2223
Catwalk Standard Oscillating angle : up 7.5° Boom lift angle : up 7.5°
Type Fixed boom 1739 Oscillating angle : down 7.5°
Fire extinguisher Standard 174
Boom lift angle Up 54°・ Down 20°
Evacuation hammer Optional 55 5
250
Boom lift angle : 0°
Boom swing angle Right 45°・ Left 10° 27
Control Oscillating angle : 0°
Guide shell
Pull to drill, drill control Standard
R32
Model GH831
R3
Direct boom control Standard
97
21
Anti-jamming system Standard Length 7,825 mm
1
Feed length 4,736 mm (4,561 mm)
1854
2-Lever rod-changer control Standard
Guide slide length 1,500 mm 605
2522
Track oscillation lock Standard
2518
Back-up buzzer Standard Guide swing angle Right 30°・ Left 90°
Engine throttle dial Standard Guide tilt angle 180°
R210
3889
Max.rod pull force 31.4 kN 4
Auto throttle control for percussion and air flow Standard
Feed type Hydraulically operated chain drive
664
Others
Power saving mode selector Standard Dust collector
305
Tilt guide angle indicator Standard Suction capacity 26 m3/min
275
Swing guide angle indicator Optional Number of filter 5
1371
2dimentional electric angle indicator Optional Rod arrangement Boom lift angle : up 54.1°
Oscillating angle : 0°
Emergency shut down system Optional Number of rod 4
Hour meter for engine Standard Control lever 2 Boom lift angle : up 51.6°
Oscillating angle : up 7.5°
Hour meter for drifter Optional Bit & rod 744 575 Machine center
Tool box Optional Recommended bit diameter 76 mm ~ 102 mm
Heavy duty under cover Optional Type of bit Cross, Button, Ballistic, Conical
Water separator for engine Standard Size of rod 45R
Winter package Optional Length of rod 3,660 mm (12 ft)
High capacity battery Optional Starter rod (M) 4,000 mm (14 ft)
13 14