Professional Documents
Culture Documents
Sprinkler Items (TPMC)
Sprinkler Items (TPMC)
9RUWH[LQKLELWRULVILWWHGDWWKHLQOHWRIVXFWLRQSLSHLQWKHVXFWLRQWDQN,WUHGXFHVYRUWLFHVDQGGHDGZDWHUDUHDPLQLPL]H
WKHDLUHQWUDLQPHQWLQWRWKHSXPSSLSHOLQHVRWRHQVXUHWKHSXPS WDQNZRUNLQJDWLWVPD[HIILFLHQF\
ā&HUWLILFDWH ,62
ā6WDQGDUG (11)3$*%
ā0DWHULDO 6666HWF
ā&RQQHFWLRQ )ODQJHGDV$16,%&ODVV
(131
ā7HPSHUDWXUH &WR&ZDWHU
ā:SUHVVXUH SVL
ā,QVWDOODWLRQ 8SDQGGRZQERWKDYDLODEOH
ā6XUIDFH 5RXJK66UHGSDLQWLQJ
$YDLODEOHVL]H
6L]H 'LPHQVLRQPP 0LQHႇHFWLYH :RUNLQJ
&RQQHFWLRQ 5HI1R
,QFK '1 ' + OHYHOPP SUHVVXUHSVL
&ODVV31 8
&ODVV31 8
&ODVV31 8
&ODVV31 8
&ODVV31 8
&ODVV31 8
&ODVV31 8
&ODVV31 8
&ODVV31 8
&ODVV31 8
&ODVV31 8
&ODVV31 8
1RWH
)RUÀDQJHGFRQQHFWLRQLWLVDYDLODEOHZLWK$16,%&ODVV%&ODVV(1313131HWF
2WKHUVL]HFRXOGEHVXSSOLHGDVFXVWRPL]HG
8
ZZZWSPFVWHHOFRP
Fire pump flowmeter
Fire pump flowmeter is used to measure linear, nonlinear, mass or volumetric flow rate of water through pump pipeline.
It features a single tube combined US GPM and L / min measurement, easy to read with safe installation.
44.4
DN
184
OD
57.7
Main parts and material
Nickel plated brass valves, borosilicate
Body Polyester coated steel, SS 316 orifice Indicator assembly glass flow tube and Viton seals
Meter colour coded hydraulic hoses
Indicator connector Nickel plated copper tube Hoses and SS hose clips
Available size
Size Pump capacity Test range
Connection Ref. No.
Inch DN (gpm) (gpm)
3" 80 200 100 - 400 Wafer FLG / GRV U3101
4" 100 250 150 - 500 Wafer FLG / GRV U3102
4" 100 300 150 - 600 Wafer FLG / GRV U3103
4" 100 450 250 - 900 Wafer FLG / GRV U3104
6" 150 500 250 - 1000 Wafer FLG / GRV U3105
6" 150 750 375 - 1500 Wafer FLG / GRV U3106
6" 150 1000 500 - 2000 Wafer FLG / GRV U3107
8" 200 1250 750 - 2500 Wafer FLG / GRV U3108
8" 200 1500 750 - 3000 Wafer FLG / GRV U3109
8" 200 2000 1000 - 4000 Wafer FLG / GRV U3110
8" 200 2500 1500 - 5000 GRV U3111
8" 200 3000 1500 - 6000 GRV U3112
U31
www.tpmcsteel.com
Breeching inlet
Breeching inlet (Inlet breeching) is normally located on the ground floor of building to enable the fire and rescue service
to connect hoses to supply water into dry riser, so that water can be pumped up to higher floors.
Available size
Drain valve Working
Way of inlet Inlet Outlet Ref. No.
outlet pressure (bar)
2-way (2) 2.5" BS336 Flanged DN 100 1", male BSPT 16 FE0601
4-way (4) 2.5" BS336 Flanged DN 150 1", male BSPT 16 FE0602
FE06
www.tpmcsteel.com
Remote float control valve
Remote float control valve is diaphragm type hydraulic control valve with adjustable parallel float, which maintains the
water surface at set position despite the fluctuation of flow rate.
· Certificate: CE
· Standard: API 598
· Connection: Flanged as ASME B16.1 Class 125,
EN 1092-2 PN16
· Temperature: 0°C to 80°C
· W. pressure: 300 psi / PN16
· Surface: FBE coating as AWWA C550
Available size
Size Dimension (mm) Working
pressure Ref. No.
Inch DN L H D D1
2" 50 206 170 152 120.5 300 psi / PN16 V7401
2-1/2" 65 211 195 178 139.5 300 psi / PN16 V7402
3" 80 249 215 191 152.5 300 psi / PN16 V7403
4" 100 320 255 229 190.5 300 psi / PN16 V7404
6" 150 414 360 279 241.5 300 psi / PN16 V7405
8" 200 500 450 343 298.5 300 psi / PN16 V7406
10" 250 605 550 406 362 300 psi / PN16 V7407
12" 300 724 645 483 432 300 psi / PN16 V7408
14" 350 734 700 533 476 300 psi / PN16 V7409
16" 400 991 700 597 540 300 psi / PN16 V7410
V74
www.tpmcsteel.com
Flanged angle type pressure relief valve
Pressure relief valve (Fire pump relief valve) is used in the discharge of fire pump to automatically relieve excessive
pressure, so to maintain constant pressure. It allows the fire pump to be stopped without causing surging.
H E
C
F
Main valve trim SS seat, SS stem Pilot control Cast bronze with SS trim
U13
www.tpmcsteel.com
Flanged angle type pressure relief valve
U13
www.tpmcsteel.com
Alarm check valve
Alarm check valve is mainly used in wet pipe fire protection system, which prevents the reverse flow and controls water
pressure. It automatically actuates alarm when water flows into the system upon fire sprinkler operation.
Standard Complete pipelines, including ball valve, Pre-assembly Retard chamber, water motor gong,
Accessories check valve, drain valve, strainer, etc. components alarm pressure switch, pressure gauge
V65
www.tpmcsteel.com
Alarm check valve
Available size (Source 2 with FM)
Size H Working
Connection pressure (psi) Ref. No.
Inch DN mm
2" 50 233 FxF, GxG, FxG 300 V6511 (FM)
2-1/2" 65 236 FxF, GxG, FxG 300 V6512 (FM)
3" 80 245 FxF, GxG, FxG 300 V6513 (FM)
4" 100 316 FxF, GxG, FxG 300 V6514 (FM)
5" 125 386 FxF, GxG, FxG 300 V6515 (FM)
6" 150 390 FxF, GxG, FxG 300 V6516 (FM)
8" 200 438 FxF, GxG, FxG 300 V6517 (FM)
10" 250 535 FxF, GxG, FxG 300 V6518 (FM)
12" 300 622 FxF, GxG, FxG 300 V6519 (FM)
Note: The flanged end connection is available with ANSI B16.5 Class 150, ANSI B16.42 Class 150, BS 4504 PN 16, or DIN 2532 PN 16.
Note: The flanged end connection is available with BS 4504 PN 16, or DIN 2532 PN 16.
V65
www.tpmcsteel.com
Zone control valve
Zone control valve (Floor control valve) is a combined unit of 4 parts: signal butterfly valve, waterflow indicator, pressure
gauge and test & drain valve.
They are assembled on fire pipeline to separates the fire area into small distribution zone for indication and control.
Because of fire sprinkler or test valve activation, the indicator detects water flow and transmits signal to control system.
After fire suppression, butterfly valve gets signal, to indicate manual shut down the water flow for recovering the system.
Waterflow detector
Component specification
Butterfly valve Test and drain valve Waterflow detector Fire sprinkler gauge
V70
www.tpmcsteel.com
Available size
Ref. No. V7020 V7025 V7030 V7040
DN50 (2") zone DN65 (2-1/2") zone DN80 (3") zone control DN100(4") zone control
Size control valve assembly control valve assembly valve assembly valve assembly
Wafer butterfly valve, Wafer butterfly valve, Wafer butterfly valve, Wafer butterfly valve,
DN50 (2"), UL/FM DN65 (2-1/2"), UL/FM DN80 (3"), UL/FM DN100 (4"), UL/FM
Water flow detector, Water flow detector, Water flow detector, Water flow detector,
Standard DN50 (2), UL/FM DN65 (2-1/2"), UL/FM DN80 (3"), UL/FM DN100 (4"), UL/FM
assembly
Test and drain valve, Test and drain valve, Test and drain valve, Test and drain valve,
DN25 (1"), UL/FM DN25 (1"), UL/FM DN25 (1"), UL/FM DN25 (1"), UL/FM
Flanged non-return valve, Flanged non-return valve, Flanged non-return valve, Flanged non-return valve,
DN50 (2"), UL/FM DN65 (2-1/2"), UL/FM DN80 (3"), UL/FM DN100 (4"), UL/FM
Optional Brass ball valve, Brass ball valve, Brass ball valve, Brass ball valve,
components DN15 (1/2"), UL/FM DN15 (1/2"), UL/FM DN15 (1/2"), UL/FM DN15 (1/2"), UL/FM
Optional Brass ball valve, Brass ball valve, Brass ball valve,
components DN15 (1/2"), UL/FM DN15 (1/2"), UL/FM DN15 (1/2"), UL/FM
Note: It is also available with other assembly type, such as grooved butterfly valve, grooved non-return valve, 2" test and drain valve, 1/4" ball valve, etc.
V70
www.tpmcsteel.com
$LUUHOHDVHYDOYH
$LUUHOHDVHYDOYHLVXVHGLQZHWSLSHVSULQNOHUV\VWHPVDQGRQFDVLQJRIKRUL]RQWDOVSOLWFDVHSXPSVRWRDXWRPDWLFDOO\
UHOHDVHVPDOOSRFNHWVRIDFFXPXODWHGDLUZKLOHWKHV\VWHPRSHUDWHVXQGHUSUHVVXUHH[FHHGLQJDWPRVSKHULFSUHVVXUH
ā&HUWLILFDWH 8//LVWHG)0$SSURYHG
ā6WDQGDUG 8/1)3$$::$&
ā&RQQHFWLRQ 7KUHDGHG137%637%633
ā)HDWXUH 6PDOORULILFHYHQWDLURQO\
ā7HPSHUDWXUH 0D[&ZDWHU
ā:SUHVVXUH SVL
ā6XUIDFH )%(FRDWLQJDV$::$&
:
+
0DLQSDUWVDQGPDWHULDO
%RG\ERQQHW 'XFWLOHLURQDV$670$ )ORDW 66
$YDLODEOHVL]H6RXUFHZLWK)0
'LPHQVLRQPP :RUNLQJ
,QOHW 2XWOHW 2UL¿FH 5HI1R
+ : SUHVVXUHSVL
137 137 8)0
137 137 8)0
137 137 8)0
137%637%633 137 8)0
137%637%633 137 8)0
137%637%633 137 8)0
8
ZZZWSPFVWHHOFRP
$LUUHOHDVHYDOYH
$YDLODEOHVL]H6RXUFHZLWK8/)0
'LPHQVLRQPP :RUNLQJ
,QOHW 2XWOHW 2UL¿FH 5HI1R
+ : SUHVVXUHSVL
137 137 88/)0
137 137 88/)0
137 137 88/)0
137 137 88/)0
137 137 88/)0
137 137 88/)0
8
ZZZWSPFVWHHOFRP
Flanged OS&Y gate valve
· Certificate: UL Listed / FM Approved
· Standard: BS EN 1074-2
· Connection: Flanged as EN 1092-2
· Indicator: Non / with supervisory switch
· Temperature: 0°C to 80°C
· W. pressure: PN 16
· Surface: FBE coating as AWWA C550
H
D
V01
www.tpmcsteel.com
Flanged OS&Y gate valve
Available size (With supervisory switch)
Size Dimension (mm) Working
pressure Ref. No.
Inch DN mm L H min H max
V01
www.tpmcsteel.com
Brass NRS gate valve
· Certificate: ISO
· Material: Brass
· Connection: Thread, BSPT / NPT
· Temperature: -20°C to 170°C
· W. pressure: PN 16 (1.6 MPa)
· Surface: Rough brass
Available size
Size Dimension (mm) Working
Connection pressure Ref. No.
Inch DN L H D
1/2" 15 45 71 55 BSPT / NPT PN 16 VC1101
3/4" 20 50 76 55 BSPT / NPT PN 16 VC1102
1" 25 55 83 60 BSPT / NPT PN 16 VC1103
1-1/4" 32 60 98 72 BSPT / NPT PN 16 VC1104
1-1/2" 40 63 109 72 BSPT / NPT PN 16 VC1105
2" 50 69 130 80 BSPT / NPT PN 16 VC1106
2-1/2" 65 88 164 100 BSPT / NPT PN 16 VC1107
3" 80 95 180 110 BSPT / NPT PN 16 VC1108
4" 100 114 235 130 BSPT / NPT PN 16 VC1109
Available size
Size Dimension (mm) Working
Connection pressure Ref. No.
Inch DN L H D
1/2" 15 46 60 60 BSPT / NPT PN 16 VC1201
3/4" 20 54 68 60 BSPT / NPT PN 16 VC1202
1" 25 67 75 70 BSPT / NPT PN 16 VC1203
1-1/4" 32 77 90 80 BSPT / NPT PN 16 VC1204
1-1/2" 40 83 100 80 BSPT / NPT PN 16 VC1205
2" 50 104 118 105 BSPT / NPT PN 16 VC1206
2-1/2" 65 171 197 179 BSPT / NPT PN 16 VC1207
3" 80 245 277 200 BSPT / NPT PN 16 VC1208
4" 100 271 316 218 BSPT / NPT PN 16 VC1209
VC11-12
www.tpmcsteel.com
Flanged swing check valve
· Certificate: UL Listed / FM Approved
· Standard: EN 1074-3
· Connection: Flanged as EN 1092-2
· Temperature: 0°C to 80°C
· W. pressure: PN 16 / PN 25
· Surface: FBE coating as AWWA C550
Seat ring Bronze Eye bolt Carbon steel zinc plated, for lifting size 4" and above
Available size
Size Dimension (mm) Working
pressure Ref. No.
Inch DN mm L H
2" 50 60.3 203 133 PN 16 / PN 25 V2101
2-1/2" 65 76.1 216 150 PN 16 / PN 25 V2102
3" 80 88.9 241 150 PN 16 / PN 25 V2103
4" 100 114.3 292 218 PN 16 / PN 25 V2104
5" 125 139.7 330 245 PN 16 / PN 25 V2105*
6" 150 165.1 356 290 PN 16 / PN 25 V2106
8" 200 219.1 495 330 / 355 PN 16 / PN 25 V2107
10" 250 273.0 622 350 PN 16 V2108
12" 300 323.9 698 376 PN 16 V2109
Note: * For size 5" with working pressure PN 16, it is only FM approved, not UL listed.
V21
www.tpmcsteel.com
K5.6 standard response horizontal sidewall sprinkler
K5.6 standard coverage standard response HSW sprinkler is usually used in light and ordinary hazard occupancies.
The deflector discharges most of the water in a horizontal plane onto adjacent walls and the protected area.
Frame Die cast brass Sealing assembly Beryllium nickel spring + Teflon tape
Note: As UL rule, it is used for ordinary hazard occupancies, and installed 4" to 12" below the ceiling.
S04
www.tpmcsteel.com
K5.6 standard response pendent sprinkler
K5.6 standard coverage standard response pendent sprinkler is usually used in all hazard occupancies. The deflector is
installed below the orifice, and the water spray is directed downwards against the deflector.
Frame Die cast brass Sealing assembly Beryllium nickel spring + Teflon tape
S02
www.tpmcsteel.com
K5.6 standard response pendent sprinkler
S02
www.tpmcsteel.com
Recessed escutcheon
· Certificate: UL Listed / FM Approved
· Standard: UL 199, NFPA 13
· Material: Carbon steel / SS
· Surface: Chromed plated / white paint
Available size
Sprinkler Overall
Type Material Adjustment Ref. No.
thread size diameter
Two-piece Carbon steel / SS 1/2" 3/4" (19.1 mm) 2-7/8" (73 mm) S9601 (UL/FM)
Two-piece Carbon steel / SS 3/4" 3/4" (19.1 mm) 2-7/8" (73 mm) S9602 (UL/FM)
Two-piece Carbon steel / SS 1/2" 1/2" (12.7 mm) 2-7/8" (73 mm) S9603 (UL/FM)
Two-piece Carbon steel / SS 3/4" 1/2" (12.7 mm) 2-7/8" (73 mm) S9604 (UL/FM)
Note: The escutcheon are certified for use with UL listed / FM approved sprinklers of different brands.
Flush escutcheon
· Certificate: ISO
· Standard: UL 199, NFPA 13
· Material: Carbon steel / plastic
· Surface: Chromed plated / white paint
Available size
Sprinkler Overall
Type Material Height Ref. No.
thread size diameter
One-piece Carbon steel / plastic 1/2" 1/2" (12.7 mm) 2-13/16" (71.4 mm) S9611 (ISO)
One-piece Carbon steel / plastic 3/4" 1/2" (12.7 mm) 2-13/16" (71.4 mm) S9612 (ISO)
One-piece Carbon steel / plastic 1/2" 1/4" (6.4 mm) 3" (76.2 mm) S9613 (ISO)
One-piece Carbon steel / plastic 3/4" 1/4" (6.4 mm) 3" (76.2 mm) S9614 (ISO)
S96
www.tpmcsteel.com