Professional Documents
Culture Documents
BLK31 Ne BP Im Imr 0031
BLK31 Ne BP Im Imr 0031
PSVM
To facilitate the design of the Actuator Retrieval Tool (ART) can Contractor please provide Company
with preferred dimensions as indicated in the attached sketch:
Preferred guide post centres relative to the centreline of the torque Bucket.
Preferred distance between the two landing pads (for the back legs on tool) relative to the centreline of the
torque Bucket
20080320090540.pdf
Printed by: Tijn, van Dokkum. 15-Sep-2008 12:30, (ID=1874). Concept By Omega AS. Page 1 of 3
Responding Party Interface Eng: Accepted Date: Accepted Date:
VerDult, Cor 20 Mar 2008
BP Additional BP Additional
HMC:
Find attached our present proposal. Info on the actuators and valves is required to progress the checks for
this design of the actuator removal frame. Best regards, Folkert
Please re-submit adding dimensions between the four off guide posts
Please find attached preliminary information.
To assist in the above request, please find attached PROVISIONAL 3D file of the Actuator retrieval Tool (ART).
Please be advised that this tool may change subject to detailed design.
32095302-110602-SK-0001_00.pdf
Printed by: Tijn, van Dokkum. 15-Sep-2008 12:30, (ID=1874). Concept By Omega AS. Page 2 of 3
Requesting Party Initiator: Accepted: Date:
Spence, Rob 01 Sep 2008
BP Additional: Acknowledged: Date:
Printed by: Tijn, van Dokkum. 15-Sep-2008 12:30, (ID=1874). Concept By Omega AS. Page 3 of 3