Download as pdf or txt
Download as pdf or txt
You are on page 1of 80

A318/A319/A320/A321

SERVICE BULLETIN

CONF ALL
AIRBUS
2, ROND POINT EMILE DEWOITINE
31700 BLAGNAC
FRANCE
 
The content of this document is the property of Airbus. All rights including copyrights are reserved.
It is supplied in confidence and commercial security on its contents must be maintained.
It must not be used for any purpose other than that for which it is supplied, nor may information
contained in it be disclosed to unauthorized persons.
It must not be reproduced in whole or in part without permission in writing from the owners of the
copyright. Requests for reproduction of any data in this document and the media authorized for it must
be addressed to Airbus.

MANDATORY MANDATORY MANDATORY


ATA SYSTEM: 29

TITLE: HYDRAULIC POWER - MAIN HYDRAULIC POWER - GENERAL - PYLON/


ENGINE INTERFACE ROD END INSPECTION
MODIFICATION No.:
None

REV 00 May 31/21 A320-29-1192


REV 01 Nov 29/22 Page 1
A318/A319/A320/A321
SERVICE BULLETIN
REVISION TRANSMITTAL SHEET
ATA SYSTEM: 29

TITLE: HYDRAULIC POWER - MAIN HYDRAULIC POWER - GENERAL - PYLON/


ENGINE INTERFACE ROD END INSPECTION
REVISION TRANSMITTAL SHEET
This page transmits Revision No. 01 of Service Bulletin No. A320-29-1192.
A. ADDITIONAL WORK
No additional work is required by this revision.
B. REASON
Revision No. 01 issued to:

- Update the Service Bulletin applicability


- Revise the illustration to correct the fastener orientation during interface rod
installation
- Create the new configuration (CONF 002), for the aircraft which MOD No.
171159P22169 embodied or Service Bulletin No. A320-54-1053 accomplished.

NOTE: This revision satisfies the requirements of the subsequent Repair and Design
Approval Form (RDAF) and/or Technical Adaptation (TA) issued for the related
Manufacturer Serial Number (MSN)s.

TA/RDAF MSNs
81121468/006/2022 10940
81059224/035/2022 10437, 10467, 10974
81104143/003/2022 11023
81093730/003/2022 10922, 10929, 10959, 10993
81093730/024/2022 10985, 10989, 10995, 11016, 11017, 11018,
11066
C. CHANGES
CONF 001

SUMMARY
APPLICABILITY Operator updated.
PLANNING INFORMATION
APPLICABILITY
Configuration definition Applicability updated.
COMPLIANCE
Accomplishment Timescale Accomplishment timescale updated.
MANPOWER
Task set A320-A-29-XX-1192- Manpower updated.
01000-93BA-A Inspection
REFERENCES
Task set A320-A-29-XX-1192- Reference SB A320-54-1053 added.
01000-93BA-A Inspection
INDUSTRY SUPPORT INFORMATION Industry support information updated.

REV 00 May 31/21 A320-29-1192


REV 01 Nov 29/22 Page 2
A318/A319/A320/A321
SERVICE BULLETIN
REVISION TRANSMITTAL SHEET
ACCOMPLISHMENT INSTRUCTIONS
Task set A320-A-29-XX-1192-01000-93BA-A Inspection
PROCEDURE Procedure steps are rearranged.
A320-A-29-XX-1192- Procedure updated.
01001-311A-A Do a
Detailed Inspection of the
Pylon/Engine Interface
Rod Ends, Rod Attachment
Fittings, Interface Plate
and Front and Upper
Support Brackets, LH side
Fig.FA Sol.AA Flowchart Flowchart corrected.
A320-A-29-XX-1192- Procedure updated.
02001-311A-A Do a
Detailed Inspection of the
Pylon/Engine Interface
Rod Ends, Rod Attachment
Fittings, Interface Plate
and Front and Upper
Support Brackets, RH side
Fig.FA Sol.AA Flowchart Flowchart corrected.
Task set A320-A-29-XX-1192-01000-93CA-A Depending on the Inspection Result, Replace
the Pylon/Engine Interface Rod
PROCEDURE Procedure steps are rearranged.
Task A320-A-29-XX-1192-01001-920A-A Replace the Pylon/Engine Interface Lower
Rod (Depending on the Inspection Result), LH side
Fig.BC Sol.AA Replacement Orientation of the fasteners corrected.
of the LH Pylon/Engine
Interface Lower Rod
Task A320-A-29-XX-1192-02001-920A-A Replace the Pylon/Engine Interface Upper
Rod (Depending on the Inspection Result), LH side
Fig.BD Sol.AA Orientation of the fasteners corrected.
Replacement of the LH
Pylon/Engine Interface
Upper Rod
Task A320-A-29-XX-1192-03001-920A-A Replace the Pylon/Engine Interface Lower
Rod (Depending on the Inspection Result), RH side
Fig.BE Sol.AA Replacement Orientation of the fasteners corrected.
of the RH Pylon/Engine
Interface Lower Rod
Task A320-A-29-XX-1192-04001-920A-A Replace the Pylon/Engine Interface Upper
Rod (Depending on the Inspection Result), RH side
Fig.BF Sol.AA Replacement Orientation of the fasteners corrected.
of the RH Pylon/Engine
Interface Upper Rod
CONF 002

PLANNING INFORMATION
APPLICABILITY
Configuration definition New CONF created.

REV 00 May 31/21 A320-29-1192


REV 01 Nov 29/22 Page 3
A318/A319/A320/A321
SERVICE BULLETIN
REVISION TRANSMITTAL SHEET
COMPLIANCE
Accomplishment Timescale Accomplishment Timescale added.
MANPOWER
Task set A320-A-29-XX-1192- Manpower updated.
01000-93BA-A Inspection
REFERENCES
Task set A320-A-29-XX-1192- Reference SB A320-54-1053 added.
01000-93BA-A Inspection
INDUSTRY SUPPORT INFORMATION Standard sentence updated and commercial policy
added.
ACCOMPLISHMENT INSTRUCTIONS
Task set A320-A-29-XX-1192-01000-93BA-A Inspection
PROCEDURE New task created.
Task set A320-A-29-XX-1192-01000-93CA-A Depending on the Inspection Result, Replace
the Pylon/Engine Interface Rod
PROCEDURE Procedure steps are rearranged.
CONF ALL
D. FILING INSTRUCTIONS
This Service Bulletin has been generated electronically and is reissued as a complete
document. Replace the complete document.
Put this Revision Transmittal Sheet in front of the Service Bulletin.
E. HISTORY OF PREVIOUS REVISIONS
No previous revision
F. REVISION SEQUENCE
ORIGINAL: May 31/21
REVISION No. : 01 - Nov 29/22

REV 00 May 31/21 A320-29-1192


REV 01 Nov 29/22 Page 4
A318/A319/A320/A321
SERVICE BULLETIN
SUMMARY
ATA SYSTEM: 29

TITLE: HYDRAULIC POWER - MAIN HYDRAULIC POWER - GENERAL - PYLON/


ENGINE INTERFACE ROD END INSPECTION
SUMMARY
This summary is for information only and is not approved for modification of the aircraft.
A. MODIFICATIONS
CONF 001

MODIFICATION CLASSIFICATION
MAJOR None
MINOR None

NOTE: As per EASA IR 21, a minor change is one that has no appreciable effect on the
mass, balance, structural strength, reliability, operational characteristics affecting
the airworthiness of the product. All other changes are major changes.

CONF 002

MODIFICATION CLASSIFICATION
MAJOR None
MINOR None

NOTE: As per EASA IR 21, a minor change is one that has no appreciable effect on the
mass, balance, structural strength, reliability, operational characteristics affecting
the airworthiness of the product. All other changes are major changes.

CONF ALL
B. REASON

(1) History
Hydraulic and fuel pipes from engine are connected to the pylon through a pylon /
engine interface plate. This interface plate is secured to the pylon structure with a set
of two rods and brackets. There is the same installation and parts on both Left Hand
(LH) and Right Hand (RH) pylons.
Some airlines have reported, few cases of new rods damaged ref: Part Number (PN)
D0003107000400 and D0003107000600: rod eye-end of both rods and spherical
bearing with abnormal wear and play. The main root cause for the post mod rod
damages observed in-service is the high amplitude of vibrations, during take-off and
climb flight phases, generated by Engine Driven Pump (EDP) hydraulic pulsation and
potential resonance effects due to coupling of installation with excitation frequency.
(2) Objective/Action
The accomplishment of this Inspection Service Bulletin (ISB) will identify any early
spherical bearing damage to rod end eyes and rod end body.
(3) Advantages
The accomplishment of this Service Bulletin will avoid support rod chafing at adjoining
interfaces.
(4) Operational/Maintenance Consequences
None

REV 00 May 31/21 A320-29-1192


REV 01 Nov 29/22 Page 5
A318/A319/A320/A321
SERVICE BULLETIN
SUMMARY
C. GENERAL EVALUATION

EVALUATION TABLE
COMPLIANCE MANDATORY COST SAVING NO
A/C OPERATION NO VENDOR SB NO
AFFECTED
CANCELS INSPECTION SB NO ETOPS AFFECTED NO
PAX COMFORT AFFECTED NO POTENTIAL AD YES
RELIABILITY AFFECTED NO STRUCTURAL LIFE EXTENSION NO
LIFE LIMIT NO LINE MAINTENANCE AFFECTED NO

NOTE: Service Bulletin must be accomplished.

D. MAINTENANCE CONFIGURATION
CONF 001
No specific aircraft maintenance configuration required.
CONF 002
No specific aircraft maintenance configuration required.
CONF ALL
E. MATERIAL PRICE INFORMATION
CONF 001
(1) Inspection
(a) Task set A320-A-29-XX-1192-01000-93BA-A Inspection
No material
(2) Depending on the Inspection Result, Replace the Pylon/Engine Interface Rod
(a) Task set A320-A-29-XX-1192-01000-93CA-A Depending on the Inspection Result,
Replace the Pylon/Engine Interface Rod

MATERIAL PRICE INFORMATION TABLE


QTY
MATERIAL SET PRICE PER A/C MAIN PARTS
PER A/C
Components See SB See Note Rods

NOTE: Price information to be obtained from the given supplier.

CONF 002
(1) Inspection
(a) Task set A320-A-29-XX-1192-01000-93BA-A Inspection
No material
(2) Depending on the Inspection Result, Replace the Pylon/Engine Interface Rod

REV 00 May 31/21 A320-29-1192


REV 01 Nov 29/22 Page 6
A318/A319/A320/A321
SERVICE BULLETIN
SUMMARY
(a) Task set A320-A-29-XX-1192-01000-93CA-A Depending on the Inspection Result,
Replace the Pylon/Engine Interface Rod

MATERIAL PRICE INFORMATION TABLE


QTY
MATERIAL SET PRICE PER A/C MAIN PARTS
PER A/C
Components See SB See Note Rods

NOTE: Price information to be obtained from the given supplier.

CONF ALL
F. APPLICABILITY
This Service Bulletin is applicable to this (these) operator(s):
34H 82W 87Z 96U ACI AEE AHY AMU ANA ANZ AUA CAL CCA CEB CHB CSC CSN CSZ DAL
DKH DLH FFT GCR GOW HAL HKE HVN HXA IBE IGO ITY JAT JBU KAL KZR LAN MEA NKS PAL
QDA SBI SWR TAM TGW THY TSC TTW UAL VIV VJC VLG VOI WAZ WMT WZZ
G. CONCURRENT REQUIREMENTS
None
H. NATURE OF THE WORK
CONF 001
(1) Inspection
(a) Task set A320-A-29-XX-1192-01000-93BA-A Inspection

AIRCRAFT YES
EQUIPMENT NO
(2) Depending on the Inspection Result, Replace the Pylon/Engine Interface Rod
(a) Task set A320-A-29-XX-1192-01000-93CA-A Depending on the Inspection Result,
Replace the Pylon/Engine Interface Rod

AIRCRAFT YES
EQUIPMENT NO
CONF 002
(1) Inspection
(a) Task set A320-A-29-XX-1192-01000-93BA-A Inspection

AIRCRAFT YES
EQUIPMENT NO
(2) Depending on the Inspection Result, Replace the Pylon/Engine Interface Rod
(a) Task set A320-A-29-XX-1192-01000-93CA-A Depending on the Inspection Result,
Replace the Pylon/Engine Interface Rod

AIRCRAFT YES
EQUIPMENT NO
CONF ALL
I. MANPOWER
CONF 001

REV 00 May 31/21 A320-29-1192


REV 01 Nov 29/22 Page 7
A318/A319/A320/A321
SERVICE BULLETIN
SUMMARY
(1) Inspection
(a) Task set A320-A-29-XX-1192-01000-93BA-A Inspection

MANPOWER
TOTAL MAN-HOURS 6.25 h
ELAPSED TIME (HOURS) 2.50 h
(2) Depending on the Inspection Result, Replace the Pylon/Engine Interface Rod
(a) Task set A320-A-29-XX-1192-01000-93CA-A Depending on the Inspection Result,
Replace the Pylon/Engine Interface Rod

MANPOWER
TOTAL MAN-HOURS 8.50 h
ELAPSED TIME (HOURS) 3.50 h
CONF 002
(1) Inspection
(a) Task set A320-A-29-XX-1192-01000-93BA-A Inspection

MANPOWER
TOTAL MAN-HOURS 6.25 h
ELAPSED TIME (HOURS) 2.50 h
(2) Depending on the Inspection Result, Replace the Pylon/Engine Interface Rod
(a) Task set A320-A-29-XX-1192-01000-93CA-A Depending on the Inspection Result,
Replace the Pylon/Engine Interface Rod

MANPOWER
TOTAL MAN-HOURS 8.50 h
ELAPSED TIME (HOURS) 3.50 h

REV 00 May 31/21 A320-29-1192


REV 01 Nov 29/22 Page 8
A318/A319/A320/A321
SERVICE BULLETIN
SUMMARY
CONF ALL
J. GENERAL OVERVIEW
CONF ALL

Z480

Z470

A
B

LH SHOWN
A RH IDENTICAL
DO A DETAILED INSPECTION OF:
- THE PYLON/ENGINE INTERFACE UPPER AND LOWER RODS ENDS
- THE ROD ATTACHMENT FITTINGS
- THE INTERFACE PLATE
- THE UPPER SUPPORT BRACKET
- THE FRONT SUPPORT BRACKET

B
TYPICAL ICN-A320-A-29XX1192-A-FAPE3-023W2-A-006-01

Figure ICN-A320-A-29XX1192-A-FAPE3-023W2-A-006-01 Fig.SA Sol.AA SHEET 1/1


REV 00 May 31/21 A320-29-1192
General Overview
REV 01 Nov 29/22 Page 9
A318/A319/A320/A321
SERVICE BULLETIN

ATA SYSTEM: 29

TITLE: HYDRAULIC POWER - MAIN HYDRAULIC POWER - GENERAL - PYLON/


ENGINE INTERFACE ROD END INSPECTION
1. PLANNING INFORMATION
A. APPLICABILITY

NOTE: This Service Bulletin is only applicable to aircraft on which MOD No. 163348 P20807
(Service Bulletin No. Ref. SB A320-29-1189) is embodied.

(1) Models
ON A/C 06286, 06720, 06744, 06772, 06799, 06801, 06819, 06829, 06833, 06849, 06860,
06864, 06868, 06904, 06907, 06914, 06920, 06946, 06952, 06967, 06975, 07001, 07011,
07033, 07047, 07051, 07053, 07060, 07074, 07078, 07083, 07094, 07102, 07103, 07107,
07124, 07126, 07129, 07172, 07192, 07205, 07209, 07252, 07269, 07273, 07329-07331,
07333, 07334, 07343, 07391, 07396, 07401, 07449, 07470, 07477, 07483, 07495, 07504,
07507, 07510, 07512, 07517, 07533, 07540, 07547, 07553, 07554, 07563, 07571, 07577,
07579, 07588, 07594, 07598, 07618, 07626, 07629, 07648, 07671, 07688, 07710, 07721,
07731, 07735, 07737, 07744, 07751, 07753, 07757, 07788, 07795, 07804, 07811-07813,
07842, 07844, 07848, 07849, 07851, 07858, 07859, 07862, 07864, 07871, 07892, 07899,
07912, 07914, 07931, 07961, 08000, 08038, 08077, 08098, 08101, 08121, 08140, 08142,
08146, 08152, 08158, 08166, 08168, 08172, 08175, 08181, 08196, 08206, 08208, 08209,
08218, 08228, 08249, 08253, 08255, 08259, 08273, 08275, 08284, 08310, 08335, 08345,
08351, 08364, 08366, 08367, 08371, 08373, 08382, 08383, 08387, 08392, 08397, 08413,
08414, 08416, 08417, 08426, 08430, 08432, 08440, 08441, 08445, 08451, 08453, 08455,
08456, 08458-08460, 08464, 08465, 08467, 08468, 08472, 08474, 08476, 08478, 08482,
08483, 08490-08492, 08498, 08503, 08507, 08510-08512, 08527, 08528, 08540, 08541,
08546, 08554, 08556, 08558, 08559, 08563, 08565, 08570, 08576, 08583, 08584, 08586,
08588, 08594, 08601, 08607, 08613, 08618, 08621, 08622, 08624, 08627, 08628, 08630,
08633, 08643, 08645, 08648, 08650, 08654, 08656, 08658, 08661, 08665, 08668, 08674,
08683, 08688, 08702, 08708, 08715, 08720, 08723, 08725, 08728, 08736, 08737, 08741,
08743, 08752, 08757, 08771, 08775, 08777, 08782, 08785, 08787, 08789, 08793, 08803,
08818, 08820, 08832, 08833, 08836, 08843, 08844, 08846, 08848, 08850, 08852, 08860,
08864, 08865, 08867, 08870, 08873, 08877, 08885, 08890, 08894, 08896, 08899, 08901,
08905, 08922, 08927-08929, 08932, 08935, 08945, 08948, 08959, 08961, 08967, 08969,
08978, 08981, 08987, 08988, 08990, 09001, 09013, 09015, 09019, 09021, 09029, 09031,
09039, 09045, 09050, 09053, 09061, 09071, 09072, 09075, 09078, 09079, 09084, 09085,
09091, 09093, 09094, 09096, 09097, 09107, 09113, 09118, 09140, 09141, 09144, 09148,
09152, 09155, 09166, 09167, 09175, 09179, 09181, 09184, 09189, 09192-09194, 09200-
09202, 09206, 09207, 09212, 09213, 09215, 09216, 09218, 09220, 09229, 09244, 09246,
09251-09253, 09259, 09264, 09272, 09273, 09283, 09287, 09290, 09291, 09309, 09328,
09332, 09339, 09341-09343, 09346, 09351, 09353, 09356, 09358, 09369, 09375, 09379,
09385, 09387, 09388, 09390, 09391, 09395, 09400, 09402, 09405, 09407, 09410, 09412,
09414, 09416, 09420, 09423, 09430, 09435, 09437, 09442, 09447, 09450, 09453, 09459,
09461, 09463, 09467, 09469, 09471, 09474-09476, 09479, 09482, 09483, 09486, 09489,
09493, 09494, 09497, 09500, 09502, 09506, 09508, 09511, 09514, 09523, 09529, 09530,
09542, 09546, 09548, 09555, 09557-09559, 09562, 09563, 09569, 09570, 09573, 09574,
09577, 09578, 09580, 09581, 09583, 09586, 09590-09594, 09596-09598, 10005, 10008,
10011, 10014, 10016, 10021-10024, 10027, 10035, 10043, 10044, 10046, 10047, 10049,
10052, 10057, 10062, 10063, 10069, 10073, 10076, 10078, 10090, 10092, 10093, 10098,
10103, 10107, 10108, 10112, 10113, 10127, 10129, 10138, 10139, 10148, 10160, 10164,
10165, 10175, 10188, 10192, 10194, 10200, 10202, 10208, 10209, 10212, 10215, 10219,
10241, 10242, 10247, 10248, 10263, 10268, 10278, 10281, 10286, 10292, 10301, 10310,
10316, 10325, 10326, 10328, 10330, 10334, 10348, 10349, 10360, 10368, 10374, 10383,
10399, 10402, 10413, 10414, 10425, 10439, 10449, 10450, 10454, 10463, 10469, 10473,

REV 00 May 31/21 A320-29-1192


REV 01 Nov 29/22 Page 10
A318/A319/A320/A321
SERVICE BULLETIN

10477, 10495, 10498, 10504, 10505, 10537, 10538, 10545, 10546, 10549, 10553, 10560,
10561, 10563, 10569, 10571, 10572, 10574, 10578, 10580, 10587-10589, 10593, 10594,
10601, 10603, 10605, 10624, 10635-10637, 10640, 10644, 10655, 10661-10663, 10669,
10670, 10682, 10683, 10686, 10697, 10703, 10710, 10714, 10721, 10731, 10734, 10735,
10744, 10745, 10749, 10767, 10769, 10771, 10775, 10788, 10794, 10799, 10806, 10812,
10815, 10824, 10827, 10841, 10845-10847, 10857, 10860, 10872, 10873, 10879, 10895,
10899, 10901, 10904, 10910, 10921, 10944, 10949, 10956, 10971, 10983, 11002, 11003,
11013, 11023, 11037, 11052, 11056, 11067, 11076, 11079, 11084, 11088, 11090, 11103,
11111, 11118, 11120, 11124, 11128, 11130, 11132, 11139, 11143, 11147, 11150-11152,
11157, 11160, 11162, 11163, 11169, 11173, 11181, 11186, 11188, 11192, 11199, 11201,
11211, 11214, 11222, 11228, 11238, 11251, 11252, 11258, 11261, 11265, 11270, 11276,
11282, 11285, 11288, 11293, 11295, 11299, 11308, 11311, 11320, 11327, 11331, 11333,
11338, 11349, 11355, 11356, 11358, 11361, 11368, 11382, 11384, 11391, 11393, 11394,
11399, 11416, 11418, 11433, 11435, 11440, 11446, 11450, 11461, 11465, 11467, 11469,
11474, 11478, 11482, 11502, 11506, 11508, 11511, 11517, 11522, 11533, 11540, 11546,
11550, 11551, 11554, 11569, 11572, 11583, 11597, 11606, 11612, 11623, 11624, 11627,
11629, 11643, 11645, 11672, 11688, 11691, 11725, 11733, 11735, 11743, 11786, 11803,
11808, 11817, 11840, 11849, 11859, 11882, 11904, 11923, 11930
320-271N
ON A/C 11313, 11408, 11514, 11635, 11647, 11722, 11750
320-272N
ON A/C 08495, 08529, 08596, 08635, 09190, 09324
320-273N
ON A/C 06673, 07530, 07544, 07548, 07567, 07610, 07634, 07895, 07917, 07920, 07941,
07959, 07968, 07991, 08015, 08087, 08088, 08090, 08092, 08100, 08103, 08112, 08117,
08123, 08129, 08144, 08150, 08157, 08182, 08186, 08197, 08199, 08203, 08217, 08224,
08237, 08242, 08264, 08266, 08274, 08277, 08289, 08302, 08341, 08372, 08389, 08412,
08436, 08446, 08461, 08471, 08480, 08484, 08515, 08533, 08560, 08562, 08568, 08571,
08578, 08598, 08603, 08610, 08619, 08620, 08653, 08660, 08706, 08711, 08744, 08751,
08762, 08764, 08776, 08790, 08849, 08872, 08937, 08953, 08995, 09060, 09070, 09124,
09127, 09223, 09249, 09274, 09276, 09322, 09335, 09345, 09350, 09547, 10001, 10026,
10249, 10455
321-271N
ON A/C 08155, 08257, 08496, 08542, 08557, 08573, 08587, 08608, 08617, 08629, 08655,
08710, 08712, 08727, 08732, 08735, 08740, 08755, 08761, 08768, 08783, 08794, 08799,
08813, 08814, 08816, 08823, 08837, 08839, 08876, 08878, 08882, 08893, 08906, 08908,
08919, 08921, 08941, 08952, 08957, 08958, 08966, 08968, 08971, 08980, 08989, 08992,
08997, 09000, 09011, 09016, 09042, 09044, 09046, 09054, 09059, 09063, 09076, 09080,
09082, 09087, 09092, 09095, 09106, 09109, 09112, 09121, 09138, 09145, 09150, 09151,
09156, 09157, 09164, 09191, 09195, 09196, 09198, 09236, 09245, 09263, 09278, 09285,
09298, 09299, 09301, 09315, 09326, 09333, 09336, 09347, 09364, 09368, 09376, 09377,
09396, 09398, 09401, 09415, 09417, 09419, 09427, 09429, 09432, 09436, 09443-09445,
09452, 09458, 09487, 09492, 09496, 09499, 09503, 09515, 09553, 09564, 09567, 09575,
10000, 10010, 10029, 10032, 10042, 10050, 10054, 10056, 10059, 10068, 10084, 10099,
10101, 10115, 10116, 10120, 10125, 10128, 10130, 10143, 10147, 10174, 10176, 10189,
10210, 10221, 10222, 10224, 10227, 10229, 10254, 10257, 10259, 10260, 10272, 10273,
10275, 10276, 10280, 10282, 10283, 10287, 10294, 10295, 10303-10305, 10307, 10317,
10318, 10321, 10322, 10331, 10333, 10336, 10340, 10343, 10345, 10346, 10352, 10357,
10367, 10369-10371, 10373, 10375, 10380, 10382, 10389-10391, 10393, 10400, 10410,
10417, 10421, 10424, 10427, 10434, 10435, 10437, 10440, 10441, 10446-10448, 10460,
10467, 10472, 10479, 10480, 10484, 10486, 10489, 10492, 10494, 10499, 10508, 10509,
10521, 10522, 10526, 10534, 10540, 10583, 10608, 10616, 10619, 10626, 10638, 10649,
10659, 10665, 10672, 10675, 10688, 10694, 10698, 10700, 10704, 10715, 10723, 10724,
10729, 10730, 10736, 10742, 10751, 10753, 10754, 10756, 10757, 10762, 10778, 10779,
10787, 10789, 10792, 10805, 10809, 10817, 10822, 10828, 10832, 10836, 10839, 10843,
REV 00 May 31/21 A320-29-1192
REV 01 Nov 29/22 Page 11
A318/A319/A320/A321
SERVICE BULLETIN

10844, 10848, 10854-10856, 10859, 10861, 10866, 10871, 10875, 10878, 10880, 10881,
10883, 10884, 10889, 10891-10894, 10898, 10902, 10907, 10915, 10916, 10920, 10922,
10928-10931, 10933, 10935, 10939, 10940, 10943, 10946-10948, 10950-10952, 10958-
10960, 10963-10965, 10967, 10968, 10973-10975, 10979, 10985, 10989, 10993, 10995,
10998, 11004, 11007, 11011, 11016-11018, 11022, 11027, 11028, 11030, 11032, 11036,
11040, 11044, 11048, 11049, 11060-11062, 11066, 11069, 11073, 11078, 11082, 11085-
11087, 11096, 11105, 11108, 11110, 11112, 11115, 11121, 11122, 11126, 11129, 11131,
11135, 11141, 11144, 11148, 11149, 11154, 11158, 11161, 11165, 11172, 11174, 11176,
11178, 11180, 11195, 11198, 11203, 11204, 11207, 11209, 11210, 11212, 11217, 11227,
11233, 11236, 11239, 11245-11250, 11253, 11256, 11257, 11259, 11262, 11264, 11266-
11268, 11272, 11273, 11275, 11277-11280, 11291, 11298, 11303, 11309, 11312, 11316,
11317, 11328-11330, 11335-11337, 11342, 11353, 11354, 11357, 11362, 11363, 11365,
11367, 11370, 11372, 11377, 11381, 11383, 11388-11390, 11395, 11397, 11398, 11406,
11407, 11411, 11413, 11419, 11422, 11424-11429, 11434, 11436, 11437, 11439, 11453,
11454, 11457, 11458, 11460, 11464, 11466, 11470, 11472, 11475, 11477, 11479-11481,
11483, 11484, 11487, 11490, 11492, 11499, 11500, 11505, 11507, 11509, 11510, 11512,
11513, 11519, 11521, 11523, 11524, 11531, 11537, 11538, 11542-11544, 11547, 11552,
11553, 11555, 11556, 11558, 11561, 11562, 11570, 11573, 11575, 11580, 11591, 11595,
11598, 11599, 11601, 11604, 11605, 11607, 11608, 11615, 11620, 11622, 11630, 11642,
11644, 11646, 11648, 11651, 11655, 11657, 11658, 11665, 11675, 11692-11695, 11701,
11715, 11731, 11732, 11734, 11772, 11785, 11787-11789, 11824, 11837, 11839, 11841,
11860
321-271NX
ON A/C 07839, 07881, 08095, 08187, 08212, 08229, 08291, 08349, 08501, 08524, 08545,
08552, 08589, 08626, 08649, 08669, 08678, 08699, 08703, 08729, 08747, 08753, 08769,
08924, 08985, 09051, 09108, 09161, 09241, 09242, 09294, 09589, 10117, 10207, 10232,
10335, 10363, 10470, 10517, 10531, 10773, 10906
321-272N
ON A/C 09509, 10347, 10653, 10666, 10825, 10977, 11094, 11191, 11290, 11296, 11405,
11528, 11565
321-272NX
CONF ALL
(2) Applicability by MSN
06286 06673 06720 06744 06772 06799 06801 06819 06829 06833 06849 06860
06864 06868 06904 06907 06914 06920 06946 06952 06967 06975 07001 07011
07033 07047 07051 07053 07060 07074 07078 07083 07094 07102 07103 07107
07124 07126 07129 07172 07192 07205 07209 07252 07269 07273 07329-07331
07333 07334 07343 07391 07396 07401 07449 07470 07477 07483 07495 07504
07507 07510 07512 07517 07530 07533 07540 07544 07547 07548 07553 07554
07563 07567 07571 07577 07579 07588 07594 07598 07610 07618 07626 07629
07634 07648 07671 07688 07710 07721 07731 07735 07737 07744 07751 07753
07757 07788 07795 07804 07811-07813 07839 07842 07844 07848 07849 07851
07858 07859 07862 07864 07871 07881 07892 07895 07899 07912 07914 07917
07920 07931 07941 07959 07961 07968 07991 08000 08015 08038 08077 08087
08088 08090 08092 08095 08098 08100 08101 08103 08112 08117 08121 08123
08129 08140 08142 08144 08146 08150 08152 08155 08157 08158 08166 08168
08172 08175 08181 08182 08186 08187 08196 08197 08199 08203 08206 08208
08209 08212 08217 08218 08224 08228 08229 08237 08242 08249 08253 08255
08257 08259 08264 08266 08273-08275 08277 08284 08289 08291 08302 08310
08335 08341 08345 08349 08351 08364 08366 08367 08371-08373 08382 08383
08387 08389 08392 08397 08412-08414 08416 08417 08426 08430 08432 08436
08440 08441 08445 08446 08451 08453 08455 08456 08458-08461 08464 08465
08467 08468 08471 08472 08474 08476 08478 08480 08482-08484 08490-08492
08495 08496 08498 08501 08503 08507 08510-08512 08515 08524 08527-08529

REV 00 May 31/21 A320-29-1192


REV 01 Nov 29/22 Page 12
A318/A319/A320/A321
SERVICE BULLETIN

08533 08540-08542 08545 08546 08552 08554 08556-08560 08562 08563 08565
08568 08570 08571 08573 08576 08578 08583 08584 08586-08589 08594 08596
08598 08601 08603 08607 08608 08610 08613 08617-08622 08624 08626-08630
08633 08635 08643 08645 08648-08650 08653-08656 08658 08660 08661 08665
08668 08669 08674 08678 08683 08688 08699 08702 08703 08706 08708 08710-
08712 08715 08720 08723 08725 08727-08729 08732 08735-08737 08740 08741
08743 08744 08747 08751-08753 08755 08757 08761 08762 08764 08768 08769
08771 08775-08777 08782 08783 08785 08787 08789 08790 08793 08794 08799
08803 08813 08814 08816 08818 08820 08823 08832 08833 08836 08837 08839
08843 08844 08846 08848-08850 08852 08860 08864 08865 08867 08870 08872
08873 08876-08878 08882 08885 08890 08893 08894 08896 08899 08901 08905
08906 08908 08919 08921 08922 08924 08927-08929 08932 08935 08937 08941
08945 08948 08952 08953 08957-08959 08961 08966-08969 08971 08978 08980
08981 08985 08987-08990 08992 08995 08997 09000 09001 09011 09013 09015
09016 09019 09021 09029 09031 09039 09042 09044-09046 09050 09051 09053
09054 09059-09061 09063 09070-09072 09075 09076 09078-09080 09082 09084
09085 09087 09091-09097 09106-09109 09112 09113 09118 09121 09124 09127
09138 09140 09141 09144 09145 09148 09150-09152 09155-09157 09161 09164
09166 09167 09175 09179 09181 09184 09189-09196 09198 09200-09202 09206
09207 09212 09213 09215 09216 09218 09220 09223 09229 09236 09241 09242
09244-09246 09249 09251-09253 09259 09263 09264 09272-09274 09276 09278
09283 09285 09287 09290 09291 09294 09298 09299 09301 09309 09315 09322
09324 09326 09328 09332 09333 09335 09336 09339 09341-09343 09345-09347
09350 09351 09353 09356 09358 09364 09368 09369 09375-09377 09379 09385
09387 09388 09390 09391 09395 09396 09398 09400-09402 09405 09407 09410
09412 09414-09417 09419 09420 09423 09427 09429 09430 09432 09435-09437
09442-09445 09447 09450 09452 09453 09458 09459 09461 09463 09467 09469
09471 09474-09476 09479 09482 09483 09486 09487 09489 09492-09494 09496
09497 09499 09500 09502 09503 09506 09508 09509 09511 09514 09515 09523
09529 09530 09542 09546-09548 09553 09555 09557-09559 09562-09564 09567
09569 09570 09573-09575 09577 09578 09580 09581 09583 09586 09589-09594
09596-09598 10000 10001 10005 10008 10010 10011 10014 10016 10021-10024
10026 10027 10029 10032 10035 10042-10044 10046 10047 10049 10050 10052
10054 10056 10057 10059 10062 10063 10068 10069 10073 10076 10078 10084
10090 10092 10093 10098 10099 10101 10103 10107 10108 10112 10113 10115-
10117 10120 10125 10127-10130 10138 10139 10143 10147 10148 10160 10164
10165 10174-10176 10188 10189 10192 10194 10200 10202 10207-10210 10212
10215 10219 10221 10222 10224 10227 10229 10232 10241 10242 10247-10249
10254 10257 10259 10260 10263 10268 10272 10273 10275 10276 10278 10280-
10283 10286 10287 10292 10294 10295 10301 10303-10305 10307 10310 10316-
10318 10321 10322 10325 10326 10328 10330 10331 10333-10336 10340 10343
10345-10349 10352 10357 10360 10363 10367-10371 10373-10375 10380 10382
10383 10389-10391 10393 10399 10400 10402 10410 10413 10414 10417 10421
10424 10425 10427 10434 10435 10437 10439-10441 10446-10450 10454 10455
10460 10463 10467 10469 10470 10472 10473 10477 10479 10480 10484 10486
10489 10492 10494 10495 10498 10499 10504 10505 10508 10509 10517 10521
10522 10526 10531 10534 10537 10538 10540 10545 10546 10549 10553 10560
10561 10563 10569 10571 10572 10574 10578 10580 10583 10587-10589 10593
10594 10601 10603 10605 10608 10616 10619 10624 10626 10635-10638 10640
10644 10649 10653 10655 10659 10661-10663 10665 10666 10669 10670 10672
10675 10682 10683 10686 10688 10694 10697 10698 10700 10703 10704 10710
10714 10715 10721 10723 10724 10729-10731 10734-10736 10742 10744 10745
10749 10751 10753 10754 10756 10757 10762 10767 10769 10771 10773 10775
10778 10779 10787-10789 10792 10794 10799 10805 10806 10809 10812 10815
10817 10822 10824 10825 10827 10828 10832 10836 10839 10841 10843-10848
10854-10857 10859-10861 10866 10871-10873 10875 10878-10881 10883 10884
10889 10891-10895 10898 10899 10901 10902 10904 10906 10907 10910 10915
REV 00 May 31/21 A320-29-1192
REV 01 Nov 29/22 Page 13
A318/A319/A320/A321
SERVICE BULLETIN

10916 10920-10922 10928-10931 10933 10935 10939 10940 10943 10944 10946-
10952 10956 10958-10960 10963-10965 10967 10968 10971 10973-10975 10977
10979 10983 10985 10989 10993 10995 10998 11002-11004 11007 11011 11013
11016-11018 11022 11023 11027 11028 11030 11032 11036 11037 11040 11044
11048 11049 11052 11056 11060-11062 11066 11067 11069 11073 11076 11078
11079 11082 11084-11088 11090 11094 11096 11103 11105 11108 11110-11112
11115 11118 11120-11122 11124 11126 11128-11132 11135 11139 11141 11143
11144 11147-11152 11154 11157 11158 11160-11163 11165 11169 11172-11174
11176 11178 11180 11181 11186 11188 11191 11192 11195 11198 11199 11201
11203 11204 11207 11209-11212 11214 11217 11222 11227 11228 11233 11236
11238 11239 11245-11253 11256-11259 11261 11262 11264-11268 11270 11272
11273 11275-11280 11282 11285 11288 11290 11291 11293 11295 11296 11298
11299 11303 11308 11309 11311-11313 11316 11317 11320 11327-11331 11333
11335-11338 11342 11349 11353-11358 11361-11363 11365 11367 11368 11370
11372 11377 11381-11384 11388-11391 11393-11395 11397-11399 11405-11408
11411 11413 11416 11418 11419 11422 11424-11429 11433-11437 11439 11440
11446 11450 11453 11454 11457 11458 11460 11461 11464-11467 11469 11470
11472 11474 11475 11477-11484 11487 11490 11492 11499 11500 11502 11505-
11514 11517 11519 11521-11524 11528 11531 11533 11537 11538 11540 11542-
11544 11546 11547 11550-11556 11558 11561 11562 11565 11569 11570 11572
11573 11575 11580 11583 11591 11595 11597-11599 11601 11604-11608 11612
11615 11620 11622-11624 11627 11629 11630 11635 11642-11648 11651 11655
11657 11658 11665 11672 11675 11688 11691-11695 11701 11715 11722 11725
11731-11735 11743 11750 11772 11785-11789 11803 11808 11817 11824 11837
11839-11841 11849 11859 11860 11882 11904 11923 11930
(3) MSN by configuration
CONF 001

MSN CONFIGURATION
06286 06673 06720 06744 06772 06799 06801 06819 06829 001
06833 06849 06860 06864 06868 06904 06907 06914 06920
06946 06952 06967 06975 07001 07011 07033 07047 07051
07053 07060 07074 07078 07083 07094 07102 07103 07107
07124 07126 07129 07172 07192 07205 07209 07252 07269
07273 07329 07330 07331 07333 07334 07343 07391 07396
07401 07449 07470 07477 07483 07495 07504 07507 07510
07512 07517 07530 07533 07540 07544 07547 07548 07553
07554 07563 07567 07571 07577 07579 07588 07594 07598
07610 07618 07626 07629 07634 07648 07671 07688 07710
07721 07731 07735 07737 07744 07751 07753 07757 07788
07795 07804 07811 07812 07813 07839 07842 07844 07848
07849 07851 07858 07859 07862 07864 07871 07881 07892
07895 07899 07912 07914 07917 07920 07931 07941 07959
07961 07968 07991 08000 08015 08038 08077 08087 08088
08090 08092 08095 08098 08100 08101 08103 08112 08117
08121 08123 08129 08140 08142 08144 08146 08150 08152
08155 08157 08158 08166 08168 08172 08175 08181 08182
08186 08187 08196 08197 08199 08203 08206 08208 08209
08212 08217 08218 08224 08228 08229 08237 08242 08249
08253 08255 08257 08259 08264 08266 08273 08274 08275
08277 08284 08289 08291 08302 08310 08335 08341 08345
08349 08351 08364 08366 08367 08371 08372 08373 08382
08383 08387 08389 08392 08397 08412 08413 08414 08416
08417 08426 08430 08432 08436 08440 08441 08445 08446
08451 08453 08455 08456 08458 08459 08460 08461 08464

REV 00 May 31/21 A320-29-1192


REV 01 Nov 29/22 Page 14
A318/A319/A320/A321
SERVICE BULLETIN

MSN CONFIGURATION
08465 08467 08468 08471 08472 08474 08476 08478 08480
08482 08483 08484 08490 08491 08492 08495 08496 08498
08501 08503 08507 08510 08511 08512 08515 08524 08527
08528 08529 08533 08540 08541 08542 08545 08546 08552
08554 08556 08557 08558 08559 08560 08562 08563 08565
08568 08570 08571 08573 08576 08578 08583 08584 08586
08587 08588 08589 08594 08596 08598 08601 08603 08607
08608 08610 08613 08617 08618 08619 08620 08621 08622
08624 08626 08627 08628 08629 08630 08633 08635 08643
08645 08648 08649 08650 08653 08654 08655 08656 08658
08660 08661 08665 08668 08669 08674 08678 08683 08688
08699 08702 08703 08706 08708 08710 08711 08712 08715
08720 08723 08725 08727 08728 08729 08732 08735 08736
08737 08740 08741 08743 08744 08747 08751 08752 08753
08755 08757 08761 08762 08764 08768 08769 08771 08775
08776 08777 08782 08783 08785 08787 08789 08790 08793
08794 08799 08803 08813 08814 08816 08818 08820 08823
08832 08833 08836 08837 08839 08843 08844 08846 08848
08849 08850 08852 08860 08864 08865 08867 08870 08872
08873 08876 08877 08878 08882 08885 08890 08893 08894
08896 08899 08901 08905 08906 08908 08919 08921 08922
08924 08927 08928 08929 08932 08935 08937 08941 08945
08948 08952 08953 08957 08958 08959 08961 08966 08967
08968 08969 08971 08978 08980 08981 08985 08987 08988
08989 08990 08992 08995 08997 09000 09001 09011 09013
09015 09016 09019 09021 09029 09031 09039 09042 09044
09045 09046 09050 09051 09053 09054 09059 09060 09061
09063 09070 09071 09072 09075 09076 09078 09079 09080
09082 09084 09085 09087 09091 09092 09093 09094 09095
09096 09097 09106 09107 09108 09109 09112 09113 09118
09121 09124 09127 09138 09140 09141 09144 09145 09148
09150 09151 09152 09155 09156 09157 09161 09164 09166
09167 09175 09179 09181 09184 09189 09190 09191 09192
09193 09194 09195 09196 09198 09200 09201 09202 09206
09207 09212 09213 09215 09216 09218 09220 09223 09229
09236 09241 09242 09244 09245 09246 09249 09251 09252
09253 09259 09263 09264 09272 09273 09274 09276 09278
09283 09285 09287 09290 09291 09294 09298 09299 09301
09309 09315 09322 09324 09326 09328 09332 09333 09335
09336 09339 09341 09342 09343 09345 09346 09347 09350
09351 09353 09356 09358 09364 09368 09369 09375 09376
09377 09379 09385 09387 09388 09390 09391 09395 09396
09398 09400 09401 09402 09405 09407 09410 09412 09414
09415 09416 09417 09419 09420 09423 09427 09429 09430
09432 09435 09436 09437 09442 09443 09444 09445 09447
09450 09452 09453 09458 09459 09461 09463 09467 09469
09471 09474 09475 09476 09479 09482 09483 09486 09487
09489 09492 09493 09494 09496 09497 09499 09500 09502
09503 09506 09508 09509 09511 09514 09515 09523 09529
09530 09542 09546 09547 09548 09553 09555 09557 09558
09559 09562 09563 09564 09567 09569 09570 09573 09574
09575 09577 09578 09580 09581 09583 09586 09589 09590
09591 09592 09593 09594 09596 09597 09598 10000 10001
10005 10008 10010 10011 10014 10016 10021 10022 10023
10024 10026 10027 10029 10032 10035 10042 10043 10044

REV 00 May 31/21 A320-29-1192


REV 01 Nov 29/22 Page 15
A318/A319/A320/A321
SERVICE BULLETIN

MSN CONFIGURATION
10046 10047 10049 10050 10052 10054 10056 10057 10059
10062 10063 10068 10069 10073 10076 10078 10084 10090
10092 10093 10098 10099 10101 10103 10107 10108 10112
10113 10115 10116 10117 10120 10125 10127 10128 10129
10130 10138 10139 10143 10147 10148 10160 10164 10165
10174 10175 10176 10188 10189 10192 10194 10200 10202
10207 10208 10209 10210 10212 10215 10219 10221 10222
10224 10227 10229 10232 10241 10242 10247 10248 10249
10254 10257 10259 10260 10263 10268 10272 10273 10275
10276 10278 10280 10281 10282 10283 10286 10287 10292
10294 10295 10301 10303 10304 10305 10307 10310 10316
10317 10318 10321 10322 10325 10326 10328 10330 10331
10333 10334 10335 10336 10340 10343 10345 10346 10347
10348 10349 10352 10357 10360 10363 10367 10368 10369
10370 10371 10373 10374 10375 10380 10382 10383 10389
10390 10391 10393 10399 10400 10402 10410 10413 10414
10417 10421 10424 10425 10427 10434 10435 10437 10439
10440 10441 10446 10447 10448 10449 10450 10454 10455
10460 10463 10467 10469 10470 10472 10473 10477 10479
10480 10484 10486 10489 10492 10494 10495 10498 10499
10504 10505 10508 10509 10517 10521 10522 10526 10531
10534 10537 10538 10540 10545 10546 10549 10553 10560
10561 10563 10569 10571 10572 10574 10578 10580 10583
10587 10588 10589 10593 10594 10601 10603 10605 10608
10616 10619 10624 10626 10635 10636 10637 10638 10640
10644 10649 10653 10655 10659 10661 10662 10663 10665
10666 10669 10670 10672 10675 10682 10683 10686 10688
10694 10697 10698 10700 10703 10704 10710 10714 10715
10721 10723 10724 10729 10730 10731 10734 10735 10736
10742 10744 10745 10749 10751 10753 10754 10756 10757
10762 10767 10769 10771 10773 10775 10778 10779 10787
10788 10789 10792 10794 10799 10805 10806 10809 10812
10815 10817 10822 10824 10825 10827 10828 10832 10836
10839 10841 10843 10844 10845 10846 10847 10848 10854
10855 10856 10857 10859 10860 10861 10866 10871 10872
10873 10875 10878 10879 10880 10881 10883 10884 10889
10891 10892 10893 10894 10895 10898 10899 10901 10902
10904 10906 10907 10910 10915 10916 10920 10921 10922
10928 10929 10930 10931 10933 10935 10939 10940 10943
10944 10946 10947 10949 10950 10951 10952 10956 10958
10959 10960 10963 10964 10965 10967 10968 10971 10973
10974 10975 10977 10979 10983 10985 10989 10993 10995
10998 11002 11003 11004 11011 11013 11016 11017 11018
11022 11023 11027 11028 11030 11032 11036 11037 11040
11044 11048 11049 11052 11056 11060 11061 11066 11069
11078 11079 11082 11084 11108 11335
CONF 002

MSN CONFIGURATION
10948 11007 11062 11067 11073 11076 11085 11086 11087 002
11088 11090 11094 11096 11103 11105 11110 11111 11112
11115 11118 11120 11121 11122 11124 11126 11128 11129
11130 11131 11132 11135 11139 11141 11143 11144 11147
11148 11149 11150 11151 11152 11154 11157 11158 11160

REV 00 May 31/21 A320-29-1192


REV 01 Nov 29/22 Page 16
A318/A319/A320/A321
SERVICE BULLETIN

MSN CONFIGURATION
11161 11162 11163 11165 11169 11172 11173 11174 11176
11178 11180 11181 11186 11188 11191 11192 11195 11198
11199 11201 11203 11204 11207 11209 11210 11211 11212
11214 11217 11222 11227 11228 11233 11236 11238 11239
11245 11246 11247 11248 11249 11250 11251 11252 11253
11256 11257 11258 11259 11261 11262 11264 11265 11266
11267 11268 11270 11272 11273 11275 11276 11277 11278
11279 11280 11282 11285 11288 11290 11291 11293 11295
11296 11298 11299 11303 11308 11309 11311 11312 11313
11316 11317 11320 11327 11328 11329 11330 11331 11333
11336 11337 11338 11342 11349 11353 11354 11355 11356
11357 11358 11361 11362 11363 11365 11367 11368 11370
11372 11377 11381 11382 11383 11384 11388 11389 11390
11391 11393 11394 11395 11397 11398 11399 11405 11406
11407 11408 11411 11413 11416 11418 11419 11422 11424
11425 11426 11427 11428 11429 11433 11434 11435 11436
11437 11439 11440 11446 11450 11453 11454 11457 11458
11460 11461 11464 11465 11466 11467 11469 11470 11472
11474 11475 11477 11478 11479 11480 11481 11482 11483
11484 11487 11490 11492 11499 11500 11502 11505 11506
11507 11508 11509 11510 11511 11512 11513 11514 11517
11519 11521 11522 11523 11524 11528 11531 11533 11537
11538 11540 11542 11543 11544 11546 11547 11550 11551
11552 11553 11554 11555 11556 11558 11561 11562 11565
11569 11570 11572 11573 11575 11580 11583 11591 11595
11597 11598 11599 11601 11604 11605 11606 11607 11608
11612 11615 11620 11622 11623 11624 11627 11629 11630
11635 11642 11643 11644 11645 11646 11647 11648 11651
11655 11657 11658 11665 11672 11675 11688 11691 11692
11693 11694 11695 11701 11715 11722 11725 11731 11732
11733 11734 11735 11743 11750 11772 11785 11786 11787
11788 11789 11803 11808 11817 11824 11837 11839 11840
11841 11849 11859 11860 11882 11904 11923 11930
CONF ALL
(4) Configuration definition
CONF 001
Configuration 001
CONF 001 is applicable for all the aircraft on which:
- MOD No. 171159P22169 is not embodied or
- Service Bulletin No. SB A320-54-1053 is not accomplished.
CONF 002
Configuration 002
CONF 002 is applicable for all the aircraft on which:
- MOD No. 171159P22169 is embodied or
- Service Bulletin No. SB A320-54-1053 is accomplished.
CONF ALL
B. CONCURRENT REQUIREMENTS
None

REV 00 May 31/21 A320-29-1192


REV 01 Nov 29/22 Page 17
A318/A319/A320/A321
SERVICE BULLETIN

C. REASON

(1) History
Hydraulic and fuel pipes from engine are connected to the pylon through a pylon /
engine interface plate. This interface plate is secured to the pylon structure with a set
of two rods and brackets. There is the same installation and parts on both Left Hand
(LH) and Right Hand (RH) pylons.
Some airlines have reported, few cases of new rods damaged ref: Part Number (PN)
D0003107000400 and D0003107000600: rod eye-end of both rods and spherical
bearing with abnormal wear and play. The main root cause for the post mod rod
damages observed in-service is the high amplitude of vibrations, during take-off and
climb flight phases, generated by Engine Driven Pump (EDP) hydraulic pulsation and
potential resonance effects due to coupling of installation with excitation frequency.
(2) Objective/Action
The accomplishment of this Inspection Service Bulletin (ISB) will identify any early
spherical bearing damage to rod end eyes and rod end body.
(3) Advantages
The accomplishment of this Service Bulletin will avoid support rod chafing at adjoining
interfaces.
(4) Operational/Maintenance Consequences
None
D. DESCRIPTION
To accomplish this Service Bulletin it is necessary to:
(1) Inspection
(a) Task set A320-A-29-XX-1192-01000-93BA-A Inspection
CONF 001
1 Do a Detailed Inspection of the Pylon/Engine Interface Rod Ends, Rod
Attachment Fittings, Interface Plate and Front and Upper Support Brackets,
LH side
CONF 002
1 Do a Detailed Inspection of the Pylon/Engine Interface Rod Ends, Rod
Attachment Fittings, Interface Plate and Front and Upper Support Brackets,
LH side
CONF 001
2 Do a Detailed Inspection of the Pylon/Engine Interface Rod Ends, Rod
Attachment Fittings, Interface Plate and Front and Upper Support Brackets,
RH side
CONF 002
2 Do a Detailed Inspection of the Pylon/Engine Interface Rod Ends, Rod
Attachment Fittings, Interface Plate and Front and Upper Support Brackets,
RH side
CONF ALL
3 Complete and Send the Inspection Report Sheet
(2) Depending on the Inspection Result, Replace the Pylon/Engine Interface Rod
(a) Task set A320-A-29-XX-1192-01000-93CA-A Depending on the Inspection Result,
Replace the Pylon/Engine Interface Rod

REV 00 May 31/21 A320-29-1192


REV 01 Nov 29/22 Page 18
A318/A319/A320/A321
SERVICE BULLETIN

1 Replace the Pylon/Engine Interface Lower Rod (Depending on the


Inspection Result), LH side
2 Replace the Pylon/Engine Interface Upper Rod (Depending on the
Inspection Result), LH side
3 Replace the Pylon/Engine Interface Lower Rod (Depending on the
Inspection Result), RH side
4 Replace the Pylon/Engine Interface Upper Rod (Depending on the
Inspection Result), RH side
E. COMPLIANCE
CONF 001
(1) Classification
MANDATORY: Service Bulletin must be accomplished.
(2) Accomplishment Timescale
This Service Bulletin has been classified Mandatory by the issue of an Airworthiness
Directive (AD) published by the European Union Aviation Safety Agency (EASA). The
AD must be used as the reference document for the mandated accomplishment
timescale.
Table 1, CONF 001 – Detailed Inspection of the Pylon/Engine Interface Rod Ends, Rod
Attachment fittings, Interface Plate and Front and Upper Support Brackets, LH and RH
side

COMPLIANCE TIME REPETITIVE


CONDITIONS ACTION
THRESHOLD GRACE PERIOD INTERVAL
All aircraft Do a detailed Within 750 FH None None
Inspection of since the aircraft
the pylon/ delivery (MOD
engine interface 163348 P20807
rod ends, rod embodied)
attachment or SB Ref. SB
fittings, interface A320-29-1189
plate and front accomplishment
and upper
support brackets,
LH and RH side
in accordance
with Ref. Task
set A320-A-
29-XX-1192-
01ZZZ-93BZ-A
For the LH and Please contact Before next flight None None
RH side pylon/ Airbus for further
engine interface instruction
rod ends, rod
attachment
fittings, interface
plate and front
and upper
support brackets
with a hole
damage or

REV 00 May 31/21 A320-29-1192


REV 01 Nov 29/22 Page 19
A318/A319/A320/A321
SERVICE BULLETIN

COMPLIANCE TIME REPETITIVE


CONDITIONS ACTION
THRESHOLD GRACE PERIOD INTERVAL
a crack or
an abnormal
deformation or
another damage
All aircraft Do a check of None None None
the axial play
between the
pylon/engine
interface rod
end eyes and
the rod body
If axial play The aircraft can None None Every day
detected lower dispatch for
than the 1 another 100 FH
mm (0.039 in)
between rod
end eyes and
the rod body
If the play/gap Replace the Within 100 None None
becomes higher pylon/engine FH after the
or equal than 1 interface rod first inspection
mm (0.039 in.) in accordance
with Ref. Task
set A320-A-
29-XX-1192-
01ZZZ-93CZ-A
If the play/ Replace the Within 100 None None
gap remains pylon/engine FH after the
lower than 1 interface rod first inspection
mm (0.039 in.) in accordance
with Ref. Task
set A320-A-
29-XX-1192-
01ZZZ-93CZ-A
  and      
  Accomplish the Before next flight None None
Service Bulletin
No. A320-
54-1053 (*)
  and      
  Complete None None None
and send the
inspection
report sheet in
accordance with
Ref. Task A320-
A-29-XX-1192-
02ZZZ-90AZ-A
  and      

REV 00 May 31/21 A320-29-1192


REV 01 Nov 29/22 Page 20
A318/A319/A320/A321
SERVICE BULLETIN

COMPLIANCE TIME REPETITIVE


CONDITIONS ACTION
THRESHOLD GRACE PERIOD INTERVAL
  Do a repetitive None None 750 FH
detailed
inspection in
accordance with
Ref. Task set
A320-A-29-XX-
1192-01ZZZ-
93BZ-A (*)
If axial play Replace the Before next flight None None
detected equal pylon/engine
or higher than interface rod
the 1 mm (0.039 in accordance
in) between rod with Ref. Task
end eyes and set A320-A-
the rod body 29-XX-1192-
01ZZZ-93CZ-A
  and      
  Accomplish the Before next flight None None
Service Bulletin
No. A320-
54-1053 (*)
  and      
  Complete Before next flight None None
and send the
inspection
report sheet in
accordance with
Ref. Task A320-
A-29-XX-1192-
02ZZZ-90AZ-A
  Do a repetitive None None 750 FH
detailed
inspection in
accordance with
Ref. Task set
A320-A-29-XX-
1192-01ZZZ-
93BZ-A (*)
If no axial Accomplish the Before next flight None None
play detected Service Bulletin
between rod No. A320-
end eyes and 54-1053 (*)
the rod body
  and      
  Complete Before next flight None None
and send the
inspection
report sheet in
accordance with
Ref. Task A320-

REV 00 May 31/21 A320-29-1192


REV 01 Nov 29/22 Page 21
A318/A319/A320/A321
SERVICE BULLETIN

COMPLIANCE TIME REPETITIVE


CONDITIONS ACTION
THRESHOLD GRACE PERIOD INTERVAL
A-29-XX-1192-
02ZZZ-90AZ-A
  and      
  Do a repetitive None None 1500 FH
detailed
inspection in
accordance with
Ref. Task set
A320-A-29-XX-
1192-01ZZZ-
93BZ-A (*)

NOTE: (*) Do not accomplish the Service Bulletin No. Ref. SB A320-54-1053 during
repetitive inspection.

CONF 002
(1) Classification
MANDATORY: Service Bulletin must be accomplished.
(2) Accomplishment Timescale
This Service Bulletin has been classified Mandatory by the issue of an Airworthiness
Directive (AD) published by the European Union Aviation Safety Agency (EASA). The
AD must be used as the reference document for the mandated accomplishment
timescale.
Table 1, CONF 002 –Detailed Inspection of the Pylon/Engine Interface Rod Ends, Rod
Attachment fittings, Interface Plate and Front and Upper Support Brackets, LH and RH
side

COMPLIANCE TIME REPETITIVE


CONDITIONS ACTION
THRESHOLD GRACE PERIOD INTERVAL
All aircraft Do a detailed Within 750 FH None None
Inspection of since the aircraft
the pylon/ delivery (MOD
engine interface 163348 P20807
rod ends, rod embodied)
attachment or SB Ref. SB
fittings, interface A320-29-1189
plate and front accomplishment
and upper
support brackets,
LH and RH side
in accordance
with Ref. Task
set A320-A-
29-XX-1192-
01ZZZ-93BZ-A
For the LH and Please contact Before next flight None None
RH side pylon/ Airbus for further
engine interface instruction
rod ends, rod

REV 00 May 31/21 A320-29-1192


REV 01 Nov 29/22 Page 22
A318/A319/A320/A321
SERVICE BULLETIN

COMPLIANCE TIME REPETITIVE


CONDITIONS ACTION
THRESHOLD GRACE PERIOD INTERVAL
attachment
fittings, interface
plate and front
and upper
support brackets
with a hole
damage or
a crack or
an abnormal
deformation or
another damage
All aircraft Do a check of None None None
the axial play
between the
pylon/engine
interface rod
end eyes and
the rod body
If axial play The aircraft can None None Every day
detected lower dispatch for
than the 1 another 100 FH
mm (0.039 in)
between rod
end eyes and
the rod body
If the play/gap Replace the Within 100 None None
becomes higher pylon/engine FH after the
or equal than 1 interface rod first inspection
mm (0.039 in.) in accordance
with Ref. Task
set A320-A-
29-XX-1192-
01ZZZ-93CZ-A
If the play/ Replace the Within 100 None None
gap remains pylon/engine FH after the
lower than 1 interface rod first inspection
mm (0.039 in.) in accordance
with Ref. Task
set A320-A-
29-XX-1192-
01ZZZ-93CZ-A
  and      
  Complete None None None
and send the
inspection
report sheet in
accordance with
Ref. Task A320-
A-29-XX-1192-
02ZZZ-90AZ-A
  and      

REV 00 May 31/21 A320-29-1192


REV 01 Nov 29/22 Page 23
A318/A319/A320/A321
SERVICE BULLETIN

COMPLIANCE TIME REPETITIVE


CONDITIONS ACTION
THRESHOLD GRACE PERIOD INTERVAL
  Do a repetitive None None 750 FH
detailed
inspection in
accordance
with Ref. Task
set A320-A-
29-XX-1192-
01ZZZ-93BZ-A
If axial play Replace the Before next flight None None
detected equal pylon/engine
or higher than interface rod
the 1 mm (0.039 in accordance
in) between rod with Ref. Task
end eyes and set A320-A-
the rod body 29-XX-1192-
01ZZZ-93CZ-A
  Complete None None None
and send the
inspection
report sheet in
accordance with
Ref. Task A320-
A-29-XX-1192-
02ZZZ-90AZ-A
  Do a repetitive None None 750 FH
detailed
inspection in
accordance
with Ref. Task
set A320-A-
29-XX-1192-
01ZZZ-93BZ-A
  Complete None None None
and send the
inspection
report sheet in
accordance with
Ref. Task A320-
A-29-XX-1192-
02ZZZ-90AZ-A
  Do a repetitive None None 750 FH
detailed
inspection in
accordance
with Ref. Task
set A320-A-
29-XX-1192-
01ZZZ-93BZ-A
If no axial Complete None None None
play detected and send the
between rod inspection

REV 00 May 31/21 A320-29-1192


REV 01 Nov 29/22 Page 24
A318/A319/A320/A321
SERVICE BULLETIN

COMPLIANCE TIME REPETITIVE


CONDITIONS ACTION
THRESHOLD GRACE PERIOD INTERVAL
end eyes and report sheet in
the rod body accordance with
Ref. Task A320-
A-29-XX-1192-
02ZZZ-90AZ-A
  Do a repetitive None None 1500 FH
detailed
inspection in
accordance
with Ref. Task
set A320-A-
29-XX-1192-
01ZZZ-93BZ-A
CONF ALL
F. APPROVAL
The technical content of this document is approved under the authority of the Design
Organisation Approval ref. EASA.21J.031.
If an aircraft listed in the applicability has a modification or repair embodied that is not
of AIRBUS origin, and which affects the content of this Service Bulletin, the operator
is responsible for obtaining approval by its airworthiness authority for any adaptation
necessary before incorporation of the Service Bulletin.
G. MANPOWER
CONF 001
The manpower estimates given in this Service Bulletin are based on the direct labor cost to
do the work. These estimates assume that the work will be done by experienced personnel,
and may need to be revised upwards to suit operator’s circumstances. The estimates do not
include the time to prepare, plan or inspect the work. Manufacture and procurement of parts
and tools, drying times for paints, sealants, etc., and general administration work are also
not included.
(1) Inspection
(a) Task set A320-A-29-XX-1192-01000-93BA-A Inspection

PREPARATION
Job Set-Up 0.25 h
Open the Access on the LH Engine 1.00 h
Open the Access on the RH Engine 1.00 h
PROCEDURE
Do a Detailed Inspection of the Pylon/Engine Interface Rod 0.75 h
Ends, Rod Attachment Fittings, Interface Plate and Front
and Upper Support Brackets, LH side
Do a Detailed Inspection of the Pylon/Engine Interface Rod 0.75 h
Ends, Rod Attachment Fittings, Interface Plate and Front
and Upper Support Brackets, RH side
Complete and Send the Inspection Report Sheet 0.25 h
PREPARATION FOR TEST
None

REV 00 May 31/21 A320-29-1192


REV 01 Nov 29/22 Page 25
A318/A319/A320/A321
SERVICE BULLETIN

TEST
None
CLOSE-UP
Close the Access on the LH Engine 1.00 h
Close the Access on the RH Engine 1.00 h
Close-Up 0.25 h
TOTAL MAN-HOURS 6.25 h
ELAPSED TIME (HOURS) 2.50 h

NOTE: For an explanation of the man-hours and elapsed time, refer to the
Gantt Chart given in Appendix MANPOWER GANTT CHART

NOTE: The minimum man-hours necessary to accomplish this Service Bulletin


are those for the Inspection. Depending on the inspection result,
additional man-hours can apply.

(2) Depending on the Inspection Result, Replace the Pylon/Engine Interface Rod
(a) Task set A320-A-29-XX-1192-01000-93CA-A Depending on the Inspection Result,
Replace the Pylon/Engine Interface Rod

PREPARATION
Job Set-Up 0.25 h
Open the Access on the LH Engine 1.00 h
Open the Access on the RH Engine 1.00 h
PROCEDURE
Replace the Pylon/Engine Interface Lower Rod (Depending 1.00 h
on the Inspection Result), LH side
Replace the Pylon/Engine Interface Upper Rod (Depending 1.00 h
on the Inspection Result), LH side
Replace the Pylon/Engine Interface Lower Rod (Depending 1.00 h
on the Inspection Result), RH side
Replace the Pylon/Engine Interface Upper Rod (Depending 1.00 h
on the Inspection Result), RH side
PREPARATION FOR TEST
None
TEST
None
CLOSE-UP
Close the Access on the LH Engine 1.00 h
Close the Access on the RH Engine 1.00 h
Close-Up 0.25 h
TOTAL MAN-HOURS 8.50 h
ELAPSED TIME (HOURS) 3.50 h
CONF 002
The manpower estimates given in this Service Bulletin are based on the direct labor cost to
do the work. These estimates assume that the work will be done by experienced personnel,
and may need to be revised upwards to suit operator’s circumstances. The estimates do not
include the time to prepare, plan or inspect the work. Manufacture and procurement of parts

REV 00 May 31/21 A320-29-1192


REV 01 Nov 29/22 Page 26
A318/A319/A320/A321
SERVICE BULLETIN

and tools, drying times for paints, sealants, etc., and general administration work are also
not included.
(1) Inspection
(a) Task set A320-A-29-XX-1192-01000-93BA-A Inspection

PREPARATION
Job Set-Up 0.25 h
Open the Access on the LH Engine 1.00 h
Open the Access on the RH Engine 1.00 h
PROCEDURE
Do a Detailed Inspection of the Pylon/Engine Interface Rod 0.75 h
Ends, Rod Attachment Fittings, Interface Plate and Front
and Upper Support Brackets, LH side
Do a Detailed Inspection of the Pylon/Engine Interface Rod 0.75 h
Ends, Rod Attachment Fittings, Interface Plate and Front
and Upper Support Brackets, RH side
Complete and Send the Inspection Report Sheet 0.25 h
PREPARATION FOR TEST
None
TEST
None
CLOSE-UP
Close the Access on the LH Engine 1.00 h
Close the Access on the RH Engine 1.00 h
Close-Up 0.25 h
TOTAL MAN-HOURS 6.25 h
ELAPSED TIME (HOURS) 2.50 h

NOTE: For an explanation of the man-hours and elapsed time, refer to the
Gantt Chart given in Appendix MANPOWER GANTT CHART

NOTE: The minimum man-hours necessary to accomplish this Service Bulletin


are those for the Inspection. Depending on the inspection result,
additional man-hours can apply.

(2) Depending on the Inspection Result, Replace the Pylon/Engine Interface Rod
(a) Task set A320-A-29-XX-1192-01000-93CA-A Depending on the Inspection Result,
Replace the Pylon/Engine Interface Rod

PREPARATION
Job Set-Up 0.25 h
Open the Access on the LH Engine 1.00 h
Open the Access on the RH Engine 1.00 h
PROCEDURE
Replace the Pylon/Engine Interface Lower Rod (Depending 1.00 h
on the Inspection Result), LH side
Replace the Pylon/Engine Interface Upper Rod (Depending 1.00 h
on the Inspection Result), LH side

REV 00 May 31/21 A320-29-1192


REV 01 Nov 29/22 Page 27
A318/A319/A320/A321
SERVICE BULLETIN

Replace the Pylon/Engine Interface Lower Rod (Depending 1.00 h


on the Inspection Result), RH side
Replace the Pylon/Engine Interface Upper Rod (Depending 1.00 h
on the Inspection Result), RH side
PREPARATION FOR TEST
None
TEST
None
CLOSE-UP
Close the Access on the LH Engine 1.00 h
Close the Access on the RH Engine 1.00 h
Close-Up 0.25 h
TOTAL MAN-HOURS 8.50 h
ELAPSED TIME (HOURS) 3.50 h
CONF ALL
H. WEIGHT AND BALANCE
Not changed
I. ELECTRICAL LOAD DATA
Not changed
J. REFERENCES
CONF 001
(1) Inspection
(a) Task set A320-A-29-XX-1192-01000-93BA-A Inspection

AIRCRAFT MAINTENANCE MANUAL (AMM)


06-20-00 Task 12-34-24-869-002
Task 29-15-61-000-801 Task 78-36-00-010-802
Task 29-15-61-400-801 Task 78-36-00-410-802

ELECTRICAL STANDARD PRACTICES MANUAL (ESPM)


20-55-00

IN SERVICE INFORMATION (ISI)


00.00.00179

SERVICE BULLETIN (SB)


A320-29-1189 A320-54-1053

TECHNICAL FOLLOW UP (TFU)


29.00.00.084
(2) Depending on the Inspection Result, Replace the Pylon/Engine Interface Rod

REV 00 May 31/21 A320-29-1192


REV 01 Nov 29/22 Page 28
A318/A319/A320/A321
SERVICE BULLETIN

(a) Task set A320-A-29-XX-1192-01000-93CA-A Depending on the Inspection Result,


Replace the Pylon/Engine Interface Rod

AIRCRAFT MAINTENANCE MANUAL (AMM)


06-20-00 Task 12-34-24-869-002
Task 29-15-61-000-801 Task 78-36-00-010-802
Task 29-15-61-400-801 Task 78-36-00-410-802

ELECTRICAL STANDARD PRACTICES MANUAL (ESPM)


20-55-00

SERVICE BULLETIN (SB)


A320-29-1189 A320-54-1053

TECHNICAL FOLLOW UP (TFU)


29.00.00.084
CONF 002
(1) Inspection
(a) Task set A320-A-29-XX-1192-01000-93BA-A Inspection

AIRCRAFT MAINTENANCE MANUAL (AMM)


06-20-00 Task 12-34-24-869-002
Task 29-15-61-000-801 Task 78-36-00-010-802
Task 29-15-61-400-801 Task 78-36-00-410-802

ELECTRICAL STANDARD PRACTICES MANUAL (ESPM)


20-55-00

IN SERVICE INFORMATION (ISI)


00.00.00179

SERVICE BULLETIN (SB)


A320-29-1189

TECHNICAL FOLLOW UP (TFU)


29.00.00.084
(2) Depending on the Inspection Result, Replace the Pylon/Engine Interface Rod
(a) Task set A320-A-29-XX-1192-01000-93CA-A Depending on the Inspection Result,
Replace the Pylon/Engine Interface Rod

AIRCRAFT MAINTENANCE MANUAL (AMM)


06-20-00 Task 12-34-24-869-002
Task 29-15-61-000-801 Task 78-36-00-010-802
Task 29-15-61-400-801 Task 78-36-00-410-802

ELECTRICAL STANDARD PRACTICES MANUAL (ESPM)


20-55-00

REV 00 May 31/21 A320-29-1192


REV 01 Nov 29/22 Page 29
A318/A319/A320/A321
SERVICE BULLETIN

SERVICE BULLETIN (SB)


A320-29-1189

TECHNICAL FOLLOW UP (TFU)


29.00.00.084
CONF ALL
K. PUBLICATION AFFECTED
None
L. INDUSTRY SUPPORT INFORMATION
This Service Bulletin is the subject of an AIRBUS monitored retrofit campaign.
For the organization of this retrofit, you are kindly requested to contact AIRBUS retrofit
management department: monitored.retrofit@airbus.com.

- For Inspection:
Airbus will credit the man-hours indicated in this Service Bulletin for inspections that
are performed on aircraft in warranty at the time of such inspection. Credit will be
at the agreed in-house warranty labor rate. Claims for labor allowance should be
received no later than 90 days after completion of the last affected warranted aircraft.
- For Depending on the Inspection Result, Replace the Pylon/Engine Interface Rod:
For those aircraft in warranty at the time of such inspection with findings further to
inspection as per this Service Bulletin, Airbus will credit the man-hours indicated in
this Service Bulletin for corrections that are performed on aircraft in warranty at the
time of such correction. Credit will be at the agreed in-house warranty labor rate.
Claims for labor allowance should be received no later than 90 days after completion
of the last affected warranted aircraft.

REV 00 May 31/21 A320-29-1192


REV 01 Nov 29/22 Page 30
A318/A319/A320/A321
SERVICE BULLETIN

2. MATERIAL INFORMATION
A. MATERIAL APPLICABILITY
CONF 001
Material for task set A320-A-29-XX-1192-01000-93BA-A Inspection

MATERIAL QTY SEE NOTES


Referenced tools See SB
Material for task set A320-A-29-XX-1192-01000-93CA-A Depending on the
Inspection Result, Replace the Pylon/Engine Interface Rod

MATERIAL QTY SEE NOTES


Referenced tools See SB
Referenced consumables See SB
Components See SB (1)
NOTE(S)
(1): Operator supplied AIRBUS parts required to accomplish this Service Bulletin are to be
purchased by a spares purchase order.
CONF 002
Material for task set A320-A-29-XX-1192-01000-93BA-A Inspection

MATERIAL QTY SEE NOTES


Referenced tools See SB
Material for task set A320-A-29-XX-1192-01000-93CA-A Depending on the
Inspection Result, Replace the Pylon/Engine Interface Rod

MATERIAL QTY SEE NOTES


Referenced tools See SB
Referenced consumables See SB
Components See SB (1)
NOTE(S)
(1): Operator supplied AIRBUS parts required to accomplish this Service Bulletin are to be
purchased by a spares purchase order.
CONF ALL
B. TOOLING
CONF 001
Referenced tools for task set A320-A-29-XX-1192-01000-93BA-A Inspection
To accomplish this Service Bulletin it is necessary to use the tools listed in:
Ref. AMM Task 78-36-00-010-802
Ref. AMM Task 78-36-00-410-802
Referenced tools for task set A320-A-29-XX-1192-01000-93CA-A Depending on the
Inspection Result, Replace the Pylon/Engine Interface Rod
To accomplish this Service Bulletin it is necessary to use the tools listed in:
Ref. AMM Task 78-36-00-010-802
Ref. AMM Task 78-36-00-410-802

REV 00 May 31/21 A320-29-1192


REV 01 Nov 29/22 Page 31
A318/A319/A320/A321
SERVICE BULLETIN

CONF 002
Referenced tools for task set A320-A-29-XX-1192-01000-93BA-A Inspection
To accomplish this Service Bulletin it is necessary to use the tools listed in:
Ref. AMM Task 78-36-00-010-802
Ref. AMM Task 78-36-00-410-802
Referenced tools for task set A320-A-29-XX-1192-01000-93CA-A Depending on the
Inspection Result, Replace the Pylon/Engine Interface Rod
To accomplish this Service Bulletin it is necessary to use the tools listed in:
Ref. AMM Task 78-36-00-010-802
Ref. AMM Task 78-36-00-410-802
CONF ALL
C. CONSUMABLES
CONF 001
Referenced consumables for task set A320-A-29-XX-1192-01000-93CA-A
Depending on the Inspection Result, Replace the Pylon/Engine Interface Rod
To accomplish this Service Bulletin it is necessary to use the consumable materials listed in:
Ref. AMM Task 29-15-61-400-801
CONF 002
Referenced consumables for task set A320-A-29-XX-1192-01000-93CA-A
Depending on the Inspection Result, Replace the Pylon/Engine Interface Rod
To accomplish this Service Bulletin it is necessary to use the consumable materials listed in:
Ref. AMM Task 29-15-61-400-801
CONF ALL
D. LIST OF NEW PARTS
CONF 001
Components for task set A320-A-29-XX-1192-01000-93CA-A Depending on the
Inspection Result, Replace the Pylon/Engine Interface Rod

AIRBUS Material, Logistics and Suppliers


Customer Order Fulfilment
Weg beim Jaeger 150
22335 HAMBURG
Procurement address D4296 GERMANY
Phone: +49 (0) 40 50 76 40 02
E-mail: Please contact your Single Point Of Contact
(SPOC)
Internet: http://spares.airbus.com
NOTE(S)
Customers with aircraft shown in the applicability of this Service Bulletin should send
a purchase order to AIRBUS at the address given above and quote the number of this
Service Bulletin.

ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES


D0003107000400
1 2 ROD (1)
(D4296)

REV 00 May 31/21 A320-29-1192


REV 01 Nov 29/22 Page 32
A318/A319/A320/A321
SERVICE BULLETIN

ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES


D0003107000600
2 2 ROD (1)
(D4296)
NOTE(S)
(1): The components listed above are not an AIRBUS Kit, the required parts must be
ordered as necessary through the given channel.
CONF 002
Components for task set A320-A-29-XX-1192-01000-93CA-A Depending on the
Inspection Result, Replace the Pylon/Engine Interface Rod

AIRBUS Material, Logistics and Suppliers


Customer Order Fulfilment
Weg beim Jaeger 150
22335 HAMBURG
Procurement address D4296 GERMANY
Phone: +49 (0) 40 50 76 40 02
E-mail: Please contact your Single Point Of Contact
(SPOC)
Internet: http://spares.airbus.com
NOTE(S)
Customers with aircraft shown in the applicability of this Service Bulletin should send
a purchase order to AIRBUS at the address given above and quote the number of this
Service Bulletin.

ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES


D0003107000400
1 2 ROD (1)
(D4296)
D0003107000600
2 2 ROD (1)
(D4296)
NOTE(S)
(1): The components listed above are not an AIRBUS Kit, the required parts must be
ordered as necessary through the given channel.
CONF ALL
E. LIST OF EXISTING PARTS
No parts

REV 00 May 31/21 A320-29-1192


REV 01 Nov 29/22 Page 33
A318/A319/A320/A321
SERVICE BULLETIN

3. ACCOMPLISHMENT INSTRUCTIONS
Task set A320-A-29-XX-1192-01000-93BA-A (A320-A-29-XX-1192-01ZZZ-93BZ-A)
Inspection

WARNING: MAKE SURE THAT YOU OBEY ALL THE WARNINGS AND ALL THE CAUTIONS
INCLUDED IN THE REFERENCED PROCEDURES.

WARNING: BE CAREFUL WHEN YOU DO WORK ON THE ENGINE PARTS AFTER THE
ENGINE IS SHUTDOWN. THE ENGINE PARTS CAN STAY HOT FOR ALMOST 1
HOUR.

CAUTION: ALWAYS OBEY THE PRECAUTIONS THAT FOLLOW TO KEEP ELECTRICAL


WIRING IN A SATISFACTORY CONDITION (ELECTRICALLY AND MECHANICALLY
SERVICEABLE). WHEN YOU DO A MAINTENANCE WORK, REPAIRS OR
MODIFICATIONS, ALWAYS KEEP ELECTRICAL WIRING, COMPONENTS AND
THE WORK AREA AS CLEAN AS POSSIBLE. TO DO THIS:
- PUT PROTECTION, SUCH AS PLASTIC SHEETING, CLOTHS, ETC., AS
NECESSARY ON WIRING AND COMPONENTS.
- REGULARLY REMOVE ALL SHAVINGS, UNWANTED MATERIAL AND
OTHER CONTAMINATION.
THESE PRECAUTIONS WILL DECREASE THE RISK OF CONTAMINATION AND
DAMAGE TO THE ELECTRICAL WIRING INSTALLATION.
IF THERE IS CONTAMINATION, REFER TO Ref. ESPM 20-55-00.

NOTE: The accomplishment instructions of this Service Bulletin include procedures given in
other documents or in other sections of the Service Bulletin. When the words “refer to”
are used and the operator has a procedure accepted by the local authority he belongs to,
the accepted alternative procedure can be used. When the words “in accordance with”
are used then the given procedure must be followed.

NOTE: The access and close-up instructions, not comprising return to service tests, in this
Service Bulletin do not constitute or affect the technical intent of the Service Bulletin.
Operators can therefore, as deemed necessary, omit or add access and/or close-up steps
to add flexibility to their maintenance operations as long as the technical intent of the
Service Bulletin is met within the set parameters.

NOTE: Manual titles given in the accomplishment instructions are referred to by acronyms. Refer
to paragraph 1.J., References, for the definition of acronyms.

NOTE: The purpose of flowcharts is to supplement the information given in the Procedure and
Compliance paragraphs and not to serve as the primary source for tasks or compliance
times given in this Service Bulletin.

NOTE: This Service Bulletin is classified mandatory or expected to be classified mandatory by


an Airworthiness Directive (AD). The paragraphs 3.C. and 3.E. in these accomplishment
instructions are Required for Compliance (RC) and must be done to comply with the AD.
To allow more flexibility, the rule "refer to" and "in accordance with" will apply to these
paragraphs 3.C. and 3.E. Other paragraphs are recommended and may be deviated from,
done as part of other actions or done with accepted methods different from those given
in the Service Bulletin, as long as the RC paragraphs can be done and the aircraft can be
put back into a serviceable condition.

NOTE: This Service Bulletin contains the instructions for the on-aircraft maintenance necessary
to ensure the continued airworthiness of the aircraft.
For any deviations to the instructions, including Required for Compliance paragraph
contained herein, contact AIRBUS for further instructions and approval.

REV 00 May 31/21 A320-29-1192


REV 01 Nov 29/22 Page 34
A318/A319/A320/A321
SERVICE BULLETIN

A. TASK SET ASSOCIATED INFORMATION


Task Manpower
CONF 001
TOTAL MAN-HOURS 6.25 h
CONF 002
TOTAL MAN-HOURS 6.25 h
CONF 001
ELAPSED TIME (HOURS) 2.50 h
CONF 002
ELAPSED TIME (HOURS) 2.50 h
CONF ALL
B. PREPARATION
(1) Task A320-A-29-XX-1192-01001-540A-A (A320-A-29-XX-1192-01ZZZ-540Z-A)
Job Set-Up
Job Set-Up Information
Manpower/Resources/Skills

Man-hours 0.25 h
Minimum Number of person 1
Elapsed Time 0.25 h

Referenced Information

Manuals/Drawings References/Sheets
AMM Task 12-34-24-869-002
Procedure

NOTE: For the basic Aircraft configuration, refer to AMM Chapter “Introduction -
Aircraft status for maintenance" in Manual Front Matter section.

(a) Make sure that the aircraft is electrically grounded, refer to Ref. AMM Task 12-34-
24-869-002.
(b) Put the warning notice(s) in position in the cockpit on the overhead panel and
ENG START section of Panel 22VU to tell not to start engines.
(2) Task A320-A-29-XX-1192-03001-540A-A (A320-A-29-XX-1192-03ZZZ-540Z-A)
Open the Access on the LH Engine
Job Set-Up Information
Manpower/Resources/Skills

Man-hours 1.00 h
Minimum Number of person 2
Elapsed Time 0.50 h

Referenced Information

Manuals/Drawings References/Sheets
AMM Task 78-36-00-010-802
Procedure

REV 00 May 31/21 A320-29-1192


REV 01 Nov 29/22 Page 35
A318/A319/A320/A321
SERVICE BULLETIN

(a) Open the right Thrust Reverser (TR) cowl door (Door 452AR), refer to Ref. AMM
Task 78-36-00-010-802.
(b) Put on and attach a safety harness before you start work in the work area.
(3) Task A320-A-29-XX-1192-04001-540A-A (A320-A-29-XX-1192-04ZZZ-540Z-A)
Open the Access on the RH Engine
Job Set-Up Information
Manpower/Resources/Skills

Man-hours 1.00 h
Minimum Number of person 2
Elapsed Time 0.50 h

Referenced Information

Manuals/Drawings References/Sheets
AMM Task 78-36-00-010-802
Procedure
(a) Open the right TR cowl door (Door 462AR), refer to Ref. AMM Task 78-36-00-010-
802.
(b) Put on and attach a safety harness before you start work in the work area.
C. PROCEDURE
CONF 001
(1) Task A320-A-29-XX-1192-01001-311A-A (A320-A-29-XX-1192-01ZZZ-311Z-A)
Do a Detailed Inspection of the Pylon/Engine Interface Rod Ends, Rod
Attachment Fittings, Interface Plate and Front and Upper Support Brackets,
LH side
Job Set-Up Information
Working Area

Impacted Zone Access / Work Location


470 Access Door 452AR
Manpower/Resources/Skills

Man-hours 0.75 h
Minimum Number of person 1
Elapsed Time 0.75 h
Skills Airframe

Referenced Information

Manuals/Drawings References/Sheets
06-20-00
AMM Task 29-15-61-000-801
Task 29-15-61-400-801
SB A320-54-1053
Procedure
(a) Standard Practices given in this procedure:

REV 00 May 31/21 A320-29-1192


REV 01 Nov 29/22 Page 36
A318/A319/A320/A321
SERVICE BULLETIN

1 For the identification of zones, refer to Ref. AMM 06-20-00.


(b) Do a detailed inspection of the LH pylon/engine interface rod ends, of the LH
rod attachment fittings, of the LH interface plate and of the LH front and upper
support brackets, refer to Ref. Fig.BA Location of the LH rods and Ref. Fig.FA Flow
Chart.
1 Do the inspection of the installed LH rod attachment fittings.

NOTE: To inspect the LH rod attachment fittings, it is not necessary to


remove it if it is installed in stress-free condition.
Manually turn the body of the rod to check if the rod is installed in
stress-free condition.

a If partial rotation movement of the rod is possible then the rod is in a


stress-free condition:
<1> Do a visual inspection of the rod and make sure that there is no
wear or axial play between the rod eye ends and the rod body.
<2> If wear or axial play is detected, remove the rod, refer to Ref.
AMM Task 29-15-61-000-801.
<3> If no wear or no axial play is detected, complete and send the
Inspection Report sheet in accordance with Ref. Task A320-A-29-
XX-1192-02ZZZ-90AZ-A.
b If partial rotation movement of the rod is not possible then the rod is
installed in a stress condition. Release stress in rod installation prior
to removal:
<1> Put the rod in stress-free condition before removal, cut and
discard the lock wires from the rods, unscrew the nuts from
the body rod and turn the body to get the rod in a stress-free
condition.
c Do a removal of the Upper and Lower LH Pylon/Interface rods, refer to
Ref. AMM Task 29-15-61-000-801.
2 Do the inspection of the removed LH rod attachment fittings.
a Do a visual inspection of the rod and make sure that there is no wear
or axial play between the rod end eye and the rod body.
<1> If any wear or axial play is detected, measure the axial play/gap
between the rod end eye and the rod body.
<a> For each rod end with axial play/gap detected higher or
equal than 1 mm (0.039 in.).
[1] Replace the rod, refer to Ref. Task A320-A-29-XX-
1192-01ZZZ-920Z-A and/or Ref. Task A320-A-29-XX-
1192-02ZZZ-920Z-A.
[2] Accomplish the Service Bulletin No. Ref. SB A320-54-
1053.
[3] After completion of all inspections, complete and
send the Inspection Report sheet in accordance with
Ref. Task A320-A-29-XX-1192-02ZZZ-90AZ-A.

REV 00 May 31/21 A320-29-1192


REV 01 Nov 29/22 Page 37
A318/A319/A320/A321
SERVICE BULLETIN

[4] Do a repetitive detailed inspection.

NOTE: Do not accomplish the Service Bulletin No.


Ref. SB A320-54-1053 during repetitive
inspection.

<b> For each rod end with axial play/gap detected lower than
1 mm (0.039 in.).
[1] Do the re-installation of the Upper and Lower LH
Pylon/Interface rods refer to Ref. AMM Task 29-15-61-
400-801.
[2] Perform a daily inspection for play/gap monitoring,
until 100 FH (after the first inspection).
[a] If the play/gap becomes higher or equal than
1 mm (0.039 in.) before 100 FH after the first
inspection, replace the rod, refer to Ref. Task
A320-A-29-XX-1192-01ZZZ-920Z-A and/or Ref.
Task A320-A-29-XX-1192-02ZZZ-920Z-A.
[b] If the play/gap remains lower than 1 mm
(0.039 in.) within 100 FH after the first
inspection, replace the rod, refer to Ref. Task
A320-A-29-XX-1192-01ZZZ-920Z-A and/or Ref.
Task A320-A-29-XX-1192-02ZZZ-920Z-A.
[3] Accomplish the Service Bulletin No. Ref. SB A320-54-
1053.
[4] After completion of all inspections, complete and
send the Inspection Report sheet in accordance with
Ref. Task A320-A-29-XX-1192-02ZZZ-90AZ-A.
[5] Do a repetitive detailed inspection.

NOTE: Do not accomplish the Service Bulletin No.


Ref. SB A320-54-1053 during repetitive
inspection.

<2> If no wear or axial play is detected, rod can be re-installed refer


to Ref. AMM Task 29-15-61-400-801.

NOTE: The rod eye end features, as per design, two machined
lights to easy insertion of the rod ball.

3 Do a visual Inspection of the rod attachment fittings, the interface plate


and the front and upper support brackets for hole damage or a wear or a
crack or an abnormal deformation.
a In case of findings, contact AIRBUS before next flight for instructions
and accomplish those instructions accordingly.
4 Do a installation of the Upper and Lower LH Pylon/Interface rods, refer to
Ref. AMM Task 29-15-61-400-801.
a Do a repetitive inspection again at 750 FH.

REV 00 May 31/21 A320-29-1192


REV 01 Nov 29/22 Page 38
A318/A319/A320/A321
SERVICE BULLETIN

CONF 001

Z470

A B
DO A DETAILED INSPECTION
OF THE LH PYLON/ENGINE
INTERFACE UPPER ROD ENDS

DO A DETAILED INSPECTION OF:


- THE FRONT SUPPORT BRACKET
- THE UPPER SUPPORT BRACKET
DO A DETAILED - THE INTERFACE PLATE
INSPECTION OF
THE PYLON ROD
END FITTINGS
ROD LUG
A
02
C

BALL
BEARING

01
DO A DETAILED INSPECTION
OF THE INTERFACE
DO A DETAILED INSPECTION PLATE ROD END FITTINGS
OF THE LH PYLON/ENGINE
INTERFACE LOWER ROD ENDS
A A A
B
NOTE: C
01 MAKE SURE A GOOD CONTACT OF THE BALL BEARING
AND THE ROD LUG DURING THE MEASUREMENT.
02 MAKE SURE THE PLAY/GAP IS LOWER THAN 1 mm (0.039 in).
ICN-A320-A-29XX1192-A-FAPE3-023W3-A-004-01

Figure ICN-A320-A-29XX1192-A-FAPE3-023W3-A-004-01 Fig.BA Sol.AA SHEET 1/1


REV 00 May 31/21 A320-29-1192
Location of the LH rods
REV 01 Nov 29/22 Page 39
A318/A319/A320/A321
SERVICE BULLETIN

CONF 001
DO A DETAILED INSPECTION OF:
-THE PYLON ROD END FITTINGS
-THE INTERFACE PLATE ROD END FITTINGS
-THE INTERFACE PLATE
-THE UPPER SUPPORT BRACKET
-THE FRONT SUPPORT BRACKET
-THE PYLON/ENGINE INTERFACE ROD ENDS 01

IS THERE
AXIAL PLAY/GAP BETWEEN
NO THE ROD END EYES ENDS YES
AND THE ROD BODY?

ACCOMPLISH THE SERVICE


BULLETIN No A320-54-1053

COMPLETE AND SEND THE


INSPECTION REPORT
SHEET 01

DO A REPETITIVE
DETAILED INSPECTION DETECTED
01 03 DETECTED AXIAL PLAY/GAP IS
IS THERE AXIAL PLAY/GAP IS LOWER THAN
FINDING/DAMAGE HIGHER OR EQUAL 1 mm (0,039 in)
AT THE PYLON ROD END FITTINGS THAN 1 mm (0,039 in)
AND/OR THE INTERFACE PLATE ROD END FITTINGS
NO AND/OR THE INTERFACE PLATE AND/OR THE UPPER YES
SUPPORT BRACKET AND/OR
THE FRONT SUPPORT PERFORM A DAILY DETAILED
BRACKET? INSPECTION FOR 01
PLAY/GAP MONITORING 02
REPLACE THE ROD 01

CONTACT AIRBUS 01

ACCOMPLISH THE SERVICE


BULLETIN No A320-54-1053
NOTE:
THE PURPOSE OF FLOW CHARTS IS TO SUPPLEMENT THE INFORMATION GIVEN IN THE PROCEDURE AND
COMPLIANCE PARAGRAPHS AND NOT TO SERVE AS THE PRIMARY SOURCE FOR TASKS OR COMPLIANCE
TIMES GIVEN IN THIS SERVICE BULLETIN.
COMPLETE AND SEND THE INSPECTION DO A REPETITIVE DETAILED
01 FOR THE ACCOMPLISHMENT TIMESCALE, REFER TO PARAGRAPH 1.E.(2).
REPORT SHEET 01 INSPECTION 01 03
02 DO NOT EXCEED 100 FH AFTER THE FIRST INSPECTION.
03 DO NOT ACCOMPLISH THE SERVICE BULLETIN DURING REPETITIVE INSPECTION. ICN-A320-A-29XX1192-A-FAPE3-023VZ-A-009-01

Figure ICN-A320-A-29XX1192-A-FAPE3-023VZ-A-009-01 Fig.FA Sol.AA SHEET 1/1


REV 00 May 31/21 A320-29-1192
Flowchart
REV 01 Nov 29/22 Page 40
A318/A319/A320/A321
SERVICE BULLETIN

CONF 002
(1) Task A320-A-29-XX-1192-01002-311A-A (A320-A-29-XX-1192-01ZZZ-311Z-A)
Do a Detailed Inspection of the Pylon/Engine Interface Rod Ends, Rod
Attachment Fittings, Interface Plate and Front and Upper Support Brackets,
LH side
Job Set-Up Information
Working Area

Impacted Zone Access / Work Location


480 Access Door 452AR
Manpower/Resources/Skills

Man-hours 0.75 h
Minimum Number of person 1
Elapsed Time 0.75 h
Skills Airframe

Referenced Information

Manuals/Drawings References/Sheets
06-20-00
AMM Task 29-15-61-000-801
Task 29-15-61-400-801
Procedure
(a) Standard Practices given in this procedure:
1 For the identification of zones, refer to Ref. AMM 06-20-00.
(b) Do a detailed inspection of the LH pylon/engine interface rod ends, of the LH
rod attachment fittings, of the LH interface plate and of the LH front and upper
support brackets, refer to Ref. Fig.BA Location of the LH rods and Ref. Fig.FA Flow
Chart.
1 Do the inspection of the installed LH rod attachment fittings.

NOTE: To inspect the LH rod attachment fittings, it is not necessary to


remove it if it is installed in stress-free condition.
Manually turn the body of the rod to check if the rod is installed in
stress-free condition.

a If partial rotation movement of the rod is possible then the rod is in a


stress-free condition:
<1> Do a visual inspection of the rod and make sure that there is no
wear or axial play between the rod eye ends and the rod body.
<2> If wear or axial play is detected, remove the rod, refer to Ref.
AMM Task 29-15-61-000-801.
<3> If no wear or no axial play is detected, complete and send the
Inspection Report sheet in accordance with Ref. Task A320-A-29-
XX-1192-02ZZZ-90AZ-A.
b If partial rotation movement of the rod is not possible then the rod is
installed in a stress condition. Release stress in rod installation prior
to removal:

REV 00 May 31/21 A320-29-1192


REV 01 Nov 29/22 Page 41
A318/A319/A320/A321
SERVICE BULLETIN

<1> Put the rod in stress-free condition before removal, cut and
discard the lock wires from the rods, unscrew the nuts from
the body rod and turn the body to get the rod in a stress-free
condition.
c Do a removal of the Upper and Lower LH Pylon/Interface rods, refer to
Ref. AMM Task 29-15-61-000-801.
2 Do the inspection of the removed LH rod attachment fittings.
a Do a visual inspection of the rod and make sure that there is no wear
or axial play between the rod end eye and the rod body.
<1> If any wear or axial play is detected, measure the axial play/gap
between the rod end eye and the rod body.
<a> For each rod end with axial play/gap detected higher or
equal than 1 mm (0.039 in.).
[1] Replace the rod, refer to Ref. Task A320-A-29-XX-
1192-01ZZZ-920Z-A and/or Ref. Task A320-A-29-XX-
1192-02ZZZ-920Z-A.
[2] After completion of all inspections, complete and
send the Inspection Report sheet in accordance with
Ref. Task A320-A-29-XX-1192-02ZZZ-90AZ-A.
[3] Do a repetitive detailed inspection.
<b> For each rod end with axial play/gap detected lower than
1 mm (0.039 in.).
[1] Do the re-installation of the Upper and Lower LH
Pylon/Interface rods refer to Ref. AMM Task 29-15-61-
400-801.
[2] Perform a daily inspection for play/gap monitoring,
until 100 FH (after the first inspection).
[a] If the play/gap becomes higher or equal than
1 mm (0.039 in.) before 100 FH after the first
inspection, replace the rod, refer to Ref. Task
A320-A-29-XX-1192-01ZZZ-920Z-A and/or Ref.
Task A320-A-29-XX-1192-02ZZZ-920Z-A.
[b] If the play/gap remains lower than 1 mm
(0.039 in.) within 100 FH after the first
inspection, replace the rod, refer to Ref. Task
A320-A-29-XX-1192-01ZZZ-920Z-A and/or Ref.
Task A320-A-29-XX-1192-02ZZZ-920Z-A.
[3] After completion of all inspections, complete and
send the Inspection Report sheet in accordance with
Ref. Task A320-A-29-XX-1192-02ZZZ-90AZ-A.
[4] Do a repetitive detailed inspection.
<2> If no wear or axial play is detected, rod can be re-installed refer
to Ref. AMM Task 29-15-61-400-801.

NOTE: The rod eye end features, as per design, two machined
lights to easy insertion of the rod ball.

REV 00 May 31/21 A320-29-1192


REV 01 Nov 29/22 Page 42
A318/A319/A320/A321
SERVICE BULLETIN

3 Do a visual Inspection of the rod attachment fittings, the interface plate


and the front and upper support brackets for hole damage or a wear or a
crack or an abnormal deformation.
a In case of findings, contact AIRBUS before next flight for instructions
and accomplish those instructions accordingly.
4 Do a installation of the Upper and Lower LH Pylon/Interface rods, refer to
Ref. AMM Task 29-15-61-400-801.
a Do a repetitive inspection again at 750 FH.

REV 00 May 31/21 A320-29-1192


REV 01 Nov 29/22 Page 43
A318/A319/A320/A321
SERVICE BULLETIN

CONF 002

Z470

A B
DO A DETAILED INSPECTION
OF THE LH PYLON/ENGINE
INTERFACE UPPER ROD ENDS

DO A DETAILED INSPECTION OF:


- THE FRONT SUPPORT BRACKET
- THE UPPER SUPPORT BRACKET
DO A DETAILED - THE INTERFACE PLATE
INSPECTION OF
THE PYLON ROD
END FITTINGS
ROD LUG
A
02
C

BALL
BEARING

01
DO A DETAILED INSPECTION
OF THE INTERFACE
DO A DETAILED INSPECTION PLATE ROD END FITTINGS
OF THE LH PYLON/ENGINE
INTERFACE LOWER ROD ENDS
A A A
B
NOTE: C
01 MAKE SURE A GOOD CONTACT OF THE BALL BEARING
AND THE ROD LUG DURING THE MEASUREMENT.
02 MAKE SURE THE PLAY/GAP IS LOWER THAN 1 mm (0.039 in).
ICN-A320-A-29XX1192-A-FAPE3-023W3-A-004-01

Figure ICN-A320-A-29XX1192-A-FAPE3-023W3-A-004-01 Fig.BA Sol.AA SHEET 1/1


REV 00 May 31/21 A320-29-1192
Location of the LH rods
REV 01 Nov 29/22 Page 44
A318/A319/A320/A321
SERVICE BULLETIN

CONF 002

DO A DETAILED INSPECTION OF:


-THE PYLON ROD END FITTINGS
-THE INTERFACE PLATE ROD END FITTINGS
-THE INTERFACE PLATE
-THE UPPER SUPPORT BRACKET
-THE FRONT SUPPORT BRACKET
-THE PYLON/ENGINE INTERFACE ROD ENDS 01

DO A REPETITIVE
DETAILED
INSPECTION 01 DO A REPETITIVE
DETAILED
IS THERE INSPECTION 01
AXIAL PLAY/GAP BETWEEN
NO THE ROD END EYES ENDS YES
AND THE ROD BODY?

COMPLETE AND SEND


THE INSPECTION REPORT
SHEET 01

DETECTED
DETECTED AXIAL PLAY/GAP IS
IS THERE AXIAL PLAY/GAP IS LOWER THAN
FINDING/DAMAGE HIGHER OR EQUAL 1 mm (0,039 in)
AT THE PYLON ROD END FITTINGS THAN 1 mm (0,039 in)
AND/OR THE INTERFACE PLATE ROD END FITTINGS
NO AND/OR THE INTERFACE PLATE AND/OR THE UPPER YES
SUPPORT BRACKET AND/OR
THE FRONT SUPPORT PERFORM A DAILY DETAILED
BRACKET? INSPECTION FOR 01
PLAY/GAP MONITORING 02
REPLACE THE ROD 01

CONTACT AIRBUS 01

NOTE: COMPLETE AND SEND THE INSPECTION


THE PURPOSE OF FLOW CHARTS IS TO SUPPLEMENT THE INFORMATION GIVEN IN THE PROCEDURE AND REPORT SHEET 01
COMPLIANCE PARAGRAPHS AND NOT TO SERVE AS THE PRIMARY SOURCE FOR TASKS OR COMPLIANCE
TIMES GIVEN IN THIS SERVICE BULLETIN.
01 FOR THE ACCOMPLISHMENT TIMESCALE, REFER TO PARAGRAPH 1.E.(2).
02 DO NOT EXCEED 100 FH AFTER THE FIRST INSPECTION.
ICN-A320-A-29XX1192-A-FAPE3-02HX5-A-002-01

Figure ICN-A320-A-29XX1192-A-FAPE3-02HX5-A-002-01 Fig.FA Sol.AB SHEET 1/1


REV 00 May 31/21 A320-29-1192
Flowchart
REV 01 Nov 29/22 Page 45
A318/A319/A320/A321
SERVICE BULLETIN

CONF 001
(2) Task A320-A-29-XX-1192-02001-311A-A (A320-A-29-XX-1192-02ZZZ-311Z-A)
Do a Detailed Inspection of the Pylon/Engine Interface Rod Ends, Rod
Attachment Fittings, Interface Plate and Front and Upper Support Brackets,
RH side
Job Set-Up Information
Working Area

Impacted Zone Access / Work Location


480 Access Door 462AR
Manpower/Resources/Skills

Man-hours 0.75 h
Minimum Number of person 1
Elapsed Time 0.75 h
Skills Airframe

Referenced Information

Manuals/Drawings References/Sheets
06-20-00
AMM Task 29-15-61-000-801
Task 29-15-61-400-801
SB A320-54-1053
Procedure
(a) Standard Practices given in this procedure:
1 For the identification of zones, refer to Ref. AMM 06-20-00.
(b) Do a detailed inspection of the RH pylon/engine interface rod ends, of the RH
rod attachment fittings, of the RH interface plate and of the RH front and upper
support brackets, refer to Ref. Fig.BB Location of the RH rods and Ref. Fig.FA Flow
Chart.
1 Do the inspection of the installed RH rod attachment fittings.

NOTE: To inspect the RH rod attachment fittings, it is not necessary to


remove it if it is installed in stress-free condition.
Manually turn the body of the rod to check if the rod is installed in
stress-free condition.

a If partial rotation movement of the rod is possible then the rod is in a


stress-free condition:
<1> Do a visual inspection of the rod and make sure that there is no
wear or axial play between the rod eye ends and the rod body.
<2> If wear or axial play is detected, remove the rod, refer to Ref.
AMM Task 29-15-61-000-801.
<3> If no wear or no axial play is detected, complete and send the
Inspection Report sheet in accordance with Ref. Task A320-A-29-
XX-1192-02ZZZ-90AZ-A.

REV 00 May 31/21 A320-29-1192


REV 01 Nov 29/22 Page 46
A318/A319/A320/A321
SERVICE BULLETIN

b If partial rotation movement of the rod is not possible then the rod is
installed in a stress condition. Release stress in rod installation prior
to removal:
<1> Put the rod in stress-free condition before removal, cut and
discard the lock wires from the rods, unscrew the nuts from
the body rod and turn the body to get the rod in a stress-free
condition.
c Do a removal of the Upper and Lower RH Pylon/Interface rods, refer
to Ref. AMM Task 29-15-61-000-801.
2 Do the inspection of the removed RH rod attachment fittings.
a Do a visual inspection of the rod and make sure that there is no wear
or axial play between the rod end eye and the rod body.
<1> If any wear or axial play is detected, measure the axial play/gap
between the rod end eye and the rod body.
<a> For each rod end with axial play/gap detected higher or
equal than 1 mm (0.039 in.).
[1] Replace the rod, refer to Ref. Task A320-A-29-XX-
1192-03ZZZ-920Z-A and/or Ref. Task A320-A-29-XX-
1192-04ZZZ-920Z-A.
[2] Accomplish the Service Bulletin No. Ref. SB A320-54-
1053.
[3] After completion of all inspections, complete and
send the Inspection Report sheet in accordance with
Ref. Task A320-A-29-XX-1192-02ZZZ-90AZ-A.
[4] Do a repetitive detailed inspection.

NOTE: Do not accomplish the Service Bulletin No.


Ref. SB A320-54-1053 during repetitive
inspection.

<b> For each rod end with axial play/gap detected lower than
1 mm (0.039 in.).
[1] Do the re-installation of the Upper and Lower RH
Pylon/Interface rods refer to Ref. AMM Task 29-15-61-
400-801.
[2] Perform a daily inspection for play/gap monitoring,
until 100 FH (after the first inspection).
[a] If the play/gap becomes higher or equal than
1 mm (0.039 in.) before 100 FH after the first
inspection, replace the rod, refer to Ref. Task
A320-A-29-XX-1192-03ZZZ-920Z-A and/or Ref.
Task A320-A-29-XX-1192-04ZZZ-920Z-A.
[b] If the play/gap remains lower than 1 mm
(0.039 in.) within 100 FH after the first
inspection, replace the rod, refer to Ref. Task
A320-A-29-XX-1192-03ZZZ-920Z-A and/or Ref.
Task A320-A-29-XX-1192-04ZZZ-920Z-A.
[3] Accomplish the Service Bulletin No. Ref. SB A320-54-
1053.

REV 00 May 31/21 A320-29-1192


REV 01 Nov 29/22 Page 47
A318/A319/A320/A321
SERVICE BULLETIN

[4] After completion of all inspections, complete and


send the Inspection Report sheet in accordance with
Ref. Task A320-A-29-XX-1192-02ZZZ-90AZ-A.
[5] Do a repetitive detailed inspection.

NOTE: Do not accomplish the Service Bulletin No.


Ref. SB A320-54-1053 during repetitive
inspection.

<2> If no wear or axial play is detected, rod can be re-installed refer


to Ref. AMM Task 29-15-61-400-801.

NOTE: The rod eye end features, as per design, two machined
lights to easy insertion of the rod ball.

3 Do a visual Inspection of the rod attachment fittings, the interface plate


and the front and upper support brackets for hole damage or a wear or a
crack or an abnormal deformation.
a In case of findings, contact AIRBUS before next flight for instructions
and accomplish those instructions accordingly.
4 Do a installation of the Upper and Lower RH Pylon/Interface rods, refer to
Ref. AMM Task 29-15-61-400-801.
a Do a repetitive inspection again at 750 FH.

REV 00 May 31/21 A320-29-1192


REV 01 Nov 29/22 Page 48
A318/A319/A320/A321
SERVICE BULLETIN

CONF 001

Z480

B
A
DO A DETAILED INSPECTION
OF THE RH PYLON/ENGINE
INTERFACE UPPER ROD ENDS

DO A DETAILED INSPECTION OF:


- THE FRONT SUPPORT BRACKET
- THE UPPER SUPPORT BRACKET
DO A DETAILED - THE INTERFACE PLATE
INSPECTION OF
THE PYLON ROD
END FITTINGS
ROD LUG
A
02
C

BALL
BEARING

01
DO A DETAILED INSPECTION
OF THE INTERFACE
DO A DETAILED INSPECTION PLATE ROD END FITTINGS
OF THE RH PYLON/ENGINE
INTERFACE LOWER ROD ENDS
A A A
B
NOTE: C
01 MAKE SURE A GOOD CONTACT OF THE BALL BEARING
AND THE ROD LUG DURING THE MEASUREMENT.
02 MAKE SURE THE PLAY/GAP IS LOWER THAN 1 mm (0.039 in).
ICN-A320-A-29XX1192-A-FAPE3-023WC-A-004-01

Figure ICN-A320-A-29XX1192-A-FAPE3-023WC-A-004-01 Fig.BB Sol.AA SHEET 1/1


REV 00 May 31/21 A320-29-1192
Location of the RH rods
REV 01 Nov 29/22 Page 49
A318/A319/A320/A321
SERVICE BULLETIN

CONF 001
DO A DETAILED INSPECTION OF:
-THE PYLON ROD END FITTINGS
-THE INTERFACE PLATE ROD END FITTINGS
-THE INTERFACE PLATE
-THE UPPER SUPPORT BRACKET
-THE FRONT SUPPORT BRACKET
-THE PYLON/ENGINE INTERFACE ROD ENDS 01

IS THERE
AXIAL PLAY/GAP BETWEEN
NO THE ROD END EYES ENDS YES
AND THE ROD BODY?

ACCOMPLISH THE SERVICE


BULLETIN No A320-54-1053

COMPLETE AND SEND THE


INSPECTION REPORT
SHEET 01

DO A REPETITIVE
DETAILED INSPECTION DETECTED
01 03 DETECTED AXIAL PLAY/GAP IS
IS THERE AXIAL PLAY/GAP IS LOWER THAN
FINDING/DAMAGE HIGHER OR EQUAL 1 mm (0,039 in)
AT THE PYLON ROD END FITTINGS THAN 1 mm (0,039 in)
AND/OR THE INTERFACE PLATE ROD END FITTINGS
NO AND/OR THE INTERFACE PLATE AND/OR THE UPPER YES
SUPPORT BRACKET AND/OR
THE FRONT SUPPORT PERFORM A DAILY DETAILED
BRACKET? INSPECTION FOR 01
PLAY/GAP MONITORING 02
REPLACE THE ROD 01

CONTACT AIRBUS 01

ACCOMPLISH THE SERVICE


BULLETIN No A320-54-1053
NOTE:
THE PURPOSE OF FLOW CHARTS IS TO SUPPLEMENT THE INFORMATION GIVEN IN THE PROCEDURE AND
COMPLIANCE PARAGRAPHS AND NOT TO SERVE AS THE PRIMARY SOURCE FOR TASKS OR COMPLIANCE
TIMES GIVEN IN THIS SERVICE BULLETIN.
COMPLETE AND SEND THE INSPECTION DO A REPETITIVE DETAILED
01 FOR THE ACCOMPLISHMENT TIMESCALE, REFER TO PARAGRAPH 1.E.(2).
REPORT SHEET 01 INSPECTION 01 03
02 DO NOT EXCEED 100 FH AFTER THE FIRST INSPECTION.
03 DO NOT ACCOMPLISH THE SERVICE BULLETIN DURING REPETITIVE INSPECTION. ICN-A320-A-29XX1192-A-FAPE3-023VZ-A-009-01

Figure ICN-A320-A-29XX1192-A-FAPE3-023VZ-A-009-01 Fig.FA Sol.AA SHEET 1/1


REV 00 May 31/21 A320-29-1192
Flowchart
REV 01 Nov 29/22 Page 50
A318/A319/A320/A321
SERVICE BULLETIN

CONF 002
(2) Task A320-A-29-XX-1192-02002-311A-A (A320-A-29-XX-1192-02ZZZ-311Z-A)
Do a Detailed Inspection of the Pylon/Engine Interface Rod Ends, Rod
Attachment Fittings, Interface Plate and Front and Upper Support Brackets,
RH side
Job Set-Up Information
Working Area

Impacted Zone Access / Work Location


480 Access Door 462AR
Manpower/Resources/Skills

Man-hours 0.75 h
Minimum Number of person 1
Elapsed Time 0.75 h
Skills Airframe

Referenced Information

Manuals/Drawings References/Sheets
06-20-00
AMM Task 29-15-61-000-801
Task 29-15-61-400-801
Procedure
(a) Standard Practices given in this procedure:
1 For the identification of zones, refer to Ref. AMM 06-20-00.
(b) Do a detailed inspection of the RH pylon/engine interface rod ends, of the RH
rod attachment fittings, of the RH interface plate and of the RH front and upper
support brackets, refer to Ref. Fig.BB Location of the RH rods and Ref. Fig.FA Flow
Chart.
1 Do the inspection of the installed RH rod attachment fittings.

NOTE: To inspect the RH rod attachment fittings, it is not necessary to


remove it if it is installed in stress-free condition.
Manually turn the body of the rod to check if the rod is installed in
stress-free condition.

a If partial rotation movement of the rod is possible then the rod is in a


stress-free condition:
<1> Do a visual inspection of the rod and make sure that there is no
wear or axial play between the rod eye ends and the rod body.
<2> If wear or axial play is detected, remove the rod, refer to Ref.
AMM Task 29-15-61-000-801.
<3> If no wear or no axial play is detected, complete and send the
Inspection Report sheet in accordance with Ref. Task A320-A-29-
XX-1192-02ZZZ-90AZ-A.
b If partial rotation movement of the rod is not possible then the rod is
installed in a stress condition. Release stress in rod installation prior
to removal:

REV 00 May 31/21 A320-29-1192


REV 01 Nov 29/22 Page 51
A318/A319/A320/A321
SERVICE BULLETIN

<1> Put the rod in stress-free condition before removal, cut and
discard the lock wires from the rods, unscrew the nuts from
the body rod and turn the body to get the rod in a stress-free
condition.
c Do a removal of the Upper and Lower RH Pylon/Interface rods, refer
to Ref. AMM Task 29-15-61-000-801.
2 Do the inspection of the removed RH rod attachment fittings.
a Do a visual inspection of the rod and make sure that there is no wear
or axial play between the rod end eye and the rod body.
<1> If any wear or axial play is detected, measure the axial play/gap
between the rod end eye and the rod body.
<a> For each rod end with axial play/gap detected higher or
equal than 1 mm (0.039 in.).
[1] Replace the rod, refer to Ref. Task A320-A-29-XX-
1192-03ZZZ-920Z-A and/or Ref. Task A320-A-29-XX-
1192-04ZZZ-920Z-A.
[2] After completion of all inspections, complete and
send the Inspection Report sheet in accordance with
Ref. Task A320-A-29-XX-1192-02ZZZ-90AZ-A.
[3] Do a repetitive detailed inspection.
<b> For each rod end with axial play/gap detected lower than
1 mm (0.039 in.).
[1] Do the re-installation of the Upper and Lower RH
Pylon/Interface rods refer to Ref. AMM Task 29-15-61-
400-801.
[2] Perform a daily inspection for play/gap monitoring,
until 100 FH (after the first inspection).
[a] If the play/gap becomes higher or equal than
1 mm (0.039 in.) before 100 FH after the first
inspection, replace the rod, refer to Ref. Task
A320-A-29-XX-1192-03ZZZ-920Z-A and/or Ref.
Task A320-A-29-XX-1192-04ZZZ-920Z-A.
[b] If the play/gap remains lower than 1 mm
(0.039 in.) within 100 FH after the first
inspection, replace the rod, refer to Ref. Task
A320-A-29-XX-1192-03ZZZ-920Z-A and/or Ref.
Task A320-A-29-XX-1192-04ZZZ-920Z-A.
[3] After completion of all inspections, complete and
send the Inspection Report sheet in accordance with
Ref. Task A320-A-29-XX-1192-02ZZZ-90AZ-A.
[4] Do a repetitive detailed inspection.
<2> If no wear or axial play is detected, rod can be re-installed refer
to Ref. AMM Task 29-15-61-400-801.

NOTE: The rod eye end features, as per design, two machined
lights to easy insertion of the rod ball.

REV 00 May 31/21 A320-29-1192


REV 01 Nov 29/22 Page 52
A318/A319/A320/A321
SERVICE BULLETIN

3 Do a visual Inspection of the rod attachment fittings, the interface plate


and the front and upper support brackets for hole damage or a wear or a
crack or an abnormal deformation.
a In case of findings, contact AIRBUS before next flight for instructions
and accomplish those instructions accordingly.
4 Do a installation of the Upper and Lower RH Pylon/Interface rods, refer to
Ref. AMM Task 29-15-61-400-801.
a Do a repetitive inspection again at 750 FH.

REV 00 May 31/21 A320-29-1192


REV 01 Nov 29/22 Page 53
A318/A319/A320/A321
SERVICE BULLETIN

CONF 002

Z480

B
A
DO A DETAILED INSPECTION
OF THE RH PYLON/ENGINE
INTERFACE UPPER ROD ENDS

DO A DETAILED INSPECTION OF:


- THE FRONT SUPPORT BRACKET
- THE UPPER SUPPORT BRACKET
DO A DETAILED - THE INTERFACE PLATE
INSPECTION OF
THE PYLON ROD
END FITTINGS
ROD LUG
A
02
C

BALL
BEARING

01
DO A DETAILED INSPECTION
OF THE INTERFACE
DO A DETAILED INSPECTION PLATE ROD END FITTINGS
OF THE RH PYLON/ENGINE
INTERFACE LOWER ROD ENDS
A A A
B
NOTE: C
01 MAKE SURE A GOOD CONTACT OF THE BALL BEARING
AND THE ROD LUG DURING THE MEASUREMENT.
02 MAKE SURE THE PLAY/GAP IS LOWER THAN 1 mm (0.039 in).
ICN-A320-A-29XX1192-A-FAPE3-023WC-A-004-01

Figure ICN-A320-A-29XX1192-A-FAPE3-023WC-A-004-01 Fig.BB Sol.AA SHEET 1/1


REV 00 May 31/21 A320-29-1192
Location of the RH rods
REV 01 Nov 29/22 Page 54
A318/A319/A320/A321
SERVICE BULLETIN

CONF 002

DO A DETAILED INSPECTION OF:


-THE PYLON ROD END FITTINGS
-THE INTERFACE PLATE ROD END FITTINGS
-THE INTERFACE PLATE
-THE UPPER SUPPORT BRACKET
-THE FRONT SUPPORT BRACKET
-THE PYLON/ENGINE INTERFACE ROD ENDS 01

DO A REPETITIVE
DETAILED
INSPECTION 01 DO A REPETITIVE
DETAILED
IS THERE INSPECTION 01
AXIAL PLAY/GAP BETWEEN
NO THE ROD END EYES ENDS YES
AND THE ROD BODY?

COMPLETE AND SEND


THE INSPECTION REPORT
SHEET 01

DETECTED
DETECTED AXIAL PLAY/GAP IS
IS THERE AXIAL PLAY/GAP IS LOWER THAN
FINDING/DAMAGE HIGHER OR EQUAL 1 mm (0,039 in)
AT THE PYLON ROD END FITTINGS THAN 1 mm (0,039 in)
AND/OR THE INTERFACE PLATE ROD END FITTINGS
NO AND/OR THE INTERFACE PLATE AND/OR THE UPPER YES
SUPPORT BRACKET AND/OR
THE FRONT SUPPORT PERFORM A DAILY DETAILED
BRACKET? INSPECTION FOR 01
PLAY/GAP MONITORING 02
REPLACE THE ROD 01

CONTACT AIRBUS 01

NOTE: COMPLETE AND SEND THE INSPECTION


THE PURPOSE OF FLOW CHARTS IS TO SUPPLEMENT THE INFORMATION GIVEN IN THE PROCEDURE AND REPORT SHEET 01
COMPLIANCE PARAGRAPHS AND NOT TO SERVE AS THE PRIMARY SOURCE FOR TASKS OR COMPLIANCE
TIMES GIVEN IN THIS SERVICE BULLETIN.
01 FOR THE ACCOMPLISHMENT TIMESCALE, REFER TO PARAGRAPH 1.E.(2).
02 DO NOT EXCEED 100 FH AFTER THE FIRST INSPECTION.
ICN-A320-A-29XX1192-A-FAPE3-02HX5-A-002-01

Figure ICN-A320-A-29XX1192-A-FAPE3-02HX5-A-002-01 Fig.FA Sol.AB SHEET 1/1


REV 00 May 31/21 A320-29-1192
Flowchart
REV 01 Nov 29/22 Page 55
A318/A319/A320/A321
SERVICE BULLETIN

CONF ALL
(3) Task A320-A-29-XX-1192-02001-90AA-A (A320-A-29-XX-1192-02ZZZ-90AZ-A)
Complete and Send the Inspection Report Sheet
Job Set-Up Information
Manpower/Resources/Skills

Man-hours 0.25 h
Minimum Number of person 1
Elapsed Time 0.25 h

Referenced Information

Manuals/Drawings References/Sheets
ISI 00.00.00179
Procedure
(a) Complete the Inspection Report sheet, refer to Ref. Fig.RA Inspection Report
Sheet.
(b) Send the completed Inspection Report sheet in accordance with Ref. ISI
00.00.00179.

NOTE: To send the Inspection Report sheet is not Required for Compliance (RC).

REV 00 May 31/21 A320-29-1192


REV 01 Nov 29/22 Page 56
A318/A319/A320/A321
SERVICE BULLETIN

CONF ALL
INSPECTION REPORT

SERVICE BULLETIN No : A320-29-1192


A/C MSN :
FLIGHT CYCLES :
SEND THE COMPLETED INSPECTION REPORT
FLIGHT HOURS : SHEET IN ACCORDANCE WITH ISI 00.00.00179
DATE OF INSPECTION :
INSPECTION METHOD : DETAILED
INSPECTION

LH RODS

LH UPPER ROD: FINDINGS AT THE ROD END FITTINGS : DETECTED PLAY/GAP AXIAL PLAY/GAP HIGHER ROD REPLACEMENT
ROD FH AT PYLON ROD END FITTING THAN 1 mm (0,039 in) PERFORMED?
AXIAL AT FIRST INSPECTION?
FINDINGS AT THE LH INTERFACE PLATE INSPECTION INTERFACE PLATE ROD END FITTING YES
AND THE SUPPORT BRACKETS : NO YES
FH ........................ OTHER FINDING : .................................. NO
NO FINDING/DAMAGE NO
INTERFACE PLATE
UPPER SUPPORT BRACKET
FRONT SUPPORT BRACKET
OTHER FINDING : .................................. LH LOWER ROD: FINDINGS AT THE ROD END FITTINGS : DETECTED PLAY/GAP AXIAL PLAY/GAP HIGHER ROD REPLACEMENT
NO FINDING/DAMAGE ROD FH AT PYLON ROD END FITTING THAN 1 mm (0,039 in) PERFORMED?
AXIAL AT FIRST INSPECTION?
INSPECTION INTERFACE PLATE ROD END FITTING YES
NO YES
FH ........................ OTHER FINDING : .................................. NO
NO FINDING/DAMAGE NO

RH RODS

RH UPPER ROD: FINDINGS AT THE ROD END FITTINGS : DETECTED PLAY/GAP AXIAL PLAY/GAP HIGHER ROD REPLACEMENT
ROD FH AT PYLON ROD END FITTING THAN 1 mm (0,039 in) PERFORMED?
AXIAL AT FIRST INSPECTION?
FINDINGS AT THE RH INTERFACE PLATE INSPECTION INTERFACE PLATE ROD END FITTING YES
AND THE SUPPORT BRACKETS : NO YES
FH ........................ OTHER FINDING : .................................. NO
NO FINDING/DAMAGE NO
INTERFACE PLATE
UPPER SUPPORT BRACKET
FRONT SUPPORT BRACKET
OTHER FINDING : .................................. RH LOWER ROD: FINDINGS AT THE ROD END FITTINGS : DETECTED PLAY/GAP AXIAL PLAY/GAP HIGHER ROD REPLACEMENT
NO FINDING/DAMAGE ROD FH AT PYLON ROD END FITTING THAN 1 mm (0,039 in) PERFORMED?
AXIAL AT FIRST INSPECTION?
INSPECTION INTERFACE PLATE ROD END FITTING YES
NO YES
FH ........................ OTHER FINDING : .................................. NO
NO FINDING/DAMAGE NO

ICN-A320-A-29XX1192-A-FAPE3-023W0-A-006-01

Figure ICN-A320-A-29XX1192-A-FAPE3-023W0-A-006-01 Fig.RA Sol.AA SHEET 1/1


REV 00 May 31/21 A320-29-1192
Inspection Report Sheet
REV 01 Nov 29/22 Page 57
A318/A319/A320/A321
SERVICE BULLETIN

D. PREPARATION FOR TEST


None
E. TEST
None
F. CLOSE-UP
(1) Task A320-A-29-XX-1192-03001-740A-A (A320-A-29-XX-1192-03ZZZ-740Z-A)
Close the Access on the LH Engine
Job Set-Up Information
Manpower/Resources/Skills

Man-hours 1.00 h
Minimum Number of person 2
Elapsed Time 0.50 h

Referenced Information

Manuals/Drawings References/Sheets
AMM Task 78-36-00-410-802
Procedure

NOTE: If you intend to accomplish an associated Repair Task during the same layover
period, the subsequent Close-up procedure is not necessary.

(a) Make sure that the work areas are clean and clear of tools and other items of
equipment.
(b) Close the right TR cowl door (Door 452AR), refer to Ref. AMM Task 78-36-00-410-
802.
(2) Task A320-A-29-XX-1192-04001-740A-A (A320-A-29-XX-1192-04ZZZ-740Z-A)
Close the Access on the RH Engine
Job Set-Up Information
Manpower/Resources/Skills

Man-hours 1.00 h
Minimum Number of person 2
Elapsed Time 0.50 h

Referenced Information

Manuals/Drawings References/Sheets
AMM Task 78-36-00-410-802
Procedure

NOTE: If you intend to accomplish an associated Repair Task during the same layover
period, the subsequent Close-up procedure is not necessary.

(a) Make sure that the work areas are clean and clear of tools and other items of
equipment.

REV 00 May 31/21 A320-29-1192


REV 01 Nov 29/22 Page 58
A318/A319/A320/A321
SERVICE BULLETIN

(b) Close the right TR cowl door (Door 462AR), refer to Ref. AMM Task 78-36-00-410-
802.
(3) Task A320-A-29-XX-1192-01001-740A-A (A320-A-29-XX-1192-01ZZZ-740Z-A)
Close-Up
Job Set-Up Information
Manpower/Resources/Skills

Man-hours 0.25 h
Minimum Number of person 1
Elapsed Time 0.25 h

Procedure

NOTE: If you intend to accomplish an associated Repair Task during the same layover
period, the subsequent Close-up procedure is not necessary.

(a) Remove the warning notice(s) in the cockpit on the overhead panel and ENG
START section of Panel 22VU.
(b) Put the aircraft back to its initial configuration.
G. ADMINISTRATIVE
(1) Task A320-A-29-XX-1192-01001-90AA-A (A320-A-29-XX-1192-01ZZZ-90AZ-A)
Administrative

Procedure
Confirm in the applicable aircraft records that you have completed all the work defined
in this Service Bulletin task set as required.

REV 00 May 31/21 A320-29-1192


REV 01 Nov 29/22 Page 59
A318/A319/A320/A321
SERVICE BULLETIN

Task set A320-A-29-XX-1192-01000-93CA-A (A320-A-29-XX-1192-01ZZZ-93CZ-A)


Depending on the Inspection Result, Replace the Pylon/Engine Interface Rod

WARNING: MAKE SURE THAT YOU OBEY ALL THE WARNINGS AND ALL THE CAUTIONS
INCLUDED IN THE REFERENCED PROCEDURES.

WARNING: BE CAREFUL WHEN YOU DO WORK ON THE ENGINE PARTS AFTER THE
ENGINE IS SHUTDOWN. THE ENGINE PARTS CAN STAY HOT FOR ALMOST 1
HOUR.

CAUTION: ALWAYS OBEY THE PRECAUTIONS THAT FOLLOW TO KEEP ELECTRICAL


WIRING IN A SATISFACTORY CONDITION (ELECTRICALLY AND MECHANICALLY
SERVICEABLE). WHEN YOU DO A MAINTENANCE WORK, REPAIRS OR
MODIFICATIONS, ALWAYS KEEP ELECTRICAL WIRING, COMPONENTS AND
THE WORK AREA AS CLEAN AS POSSIBLE. TO DO THIS:
- PUT PROTECTION, SUCH AS PLASTIC SHEETING, CLOTHS, ETC., AS
NECESSARY ON WIRING AND COMPONENTS.
- REGULARLY REMOVE ALL SHAVINGS, UNWANTED MATERIAL AND
OTHER CONTAMINATION.
THESE PRECAUTIONS WILL DECREASE THE RISK OF CONTAMINATION AND
DAMAGE TO THE ELECTRICAL WIRING INSTALLATION.
IF THERE IS CONTAMINATION, REFER TO Ref. ESPM 20-55-00.

NOTE: The accomplishment instructions of this Service Bulletin include procedures given in
other documents or in other sections of the Service Bulletin. When the words “refer to”
are used and the operator has a procedure accepted by the local authority he belongs to,
the accepted alternative procedure can be used. When the words “in accordance with”
are used then the given procedure must be followed.

NOTE: The access and close-up instructions, not comprising return to service tests, in this
Service Bulletin do not constitute or affect the technical intent of the Service Bulletin.
Operators can therefore, as deemed necessary, omit or add access and/or close-up steps
to add flexibility to their maintenance operations as long as the technical intent of the
Service Bulletin is met within the set parameters.

NOTE: Manual titles given in the accomplishment instructions are referred to by acronyms. Refer
to paragraph 1.J., References, for the definition of acronyms.

NOTE: This Service Bulletin contains the instructions for the on-aircraft maintenance necessary
to ensure the continued airworthiness of the aircraft.
For any deviations to the instructions, including Required for Compliance paragraph
contained herein, contact AIRBUS for further instructions and approval.

NOTE: Discarded parts must be managed at the operator's discretion.

A. TASK SET ASSOCIATED INFORMATION


Task Manpower
CONF 001
TOTAL MAN-HOURS 8.50 h
CONF 002
TOTAL MAN-HOURS 8.50 h
CONF 001
ELAPSED TIME (HOURS) 3.50 h
CONF 002
ELAPSED TIME (HOURS) 3.50 h

REV 00 May 31/21 A320-29-1192


REV 01 Nov 29/22 Page 60
A318/A319/A320/A321
SERVICE BULLETIN

CONF ALL
B. PREPARATION
(1) Task A320-A-29-XX-1192-02001-540A-A (A320-A-29-XX-1192-02ZZZ-540Z-A)
Job Set-Up
Job Set-Up Information
Manpower/Resources/Skills

Man-hours 0.25 h
Minimum Number of person 1
Elapsed Time 0.25 h

Referenced Information

Manuals/Drawings References/Sheets
AMM Task 12-34-24-869-002
Procedure

NOTE: If you intend to accomplish this Repair during the same layover period as the
associated Inspection, the subsequent Preparation procedure is not necessary.

NOTE: For the basic Aircraft configuration, refer to AMM Chapter “Introduction -
Aircraft status for maintenance" in Manual Front Matter section.

(a) Make sure that the aircraft is electrically grounded, refer to Ref. AMM Task 12-34-
24-869-002.
(b) Put the warning notice(s) in position in the cockpit on the overhead panel and
ENG START section of Panel 22VU to tell not to start engines.
(2) Task A320-A-29-XX-1192-05001-540A-A (A320-A-29-XX-1192-05ZZZ-540Z-A)
Open the Access on the LH Engine
Job Set-Up Information
Manpower/Resources/Skills

Man-hours 1.00 h
Minimum Number of person 2
Elapsed Time 0.50 h

Referenced Information

Manuals/Drawings References/Sheets
AMM Task 78-36-00-010-802
Procedure

NOTE: If you intend to accomplish this Repair during the same layover period as the
associated Inspection, the subsequent Preparation procedure is not necessary.

(a) Open the right TR cowl door (Door 452AR), refer to Ref. AMM Task 78-36-00-010-
802.
(b) Put on and attach a safety harness before you start work in the work area.
(3) Task A320-A-29-XX-1192-06001-540A-A (A320-A-29-XX-1192-06ZZZ-540Z-A)
Open the Access on the RH Engine

REV 00 May 31/21 A320-29-1192


REV 01 Nov 29/22 Page 61
A318/A319/A320/A321
SERVICE BULLETIN

Job Set-Up Information


Manpower/Resources/Skills

Man-hours 1.00 h
Minimum Number of person 2
Elapsed Time 0.50 h

Referenced Information

Manuals/Drawings References/Sheets
AMM Task 78-36-00-010-802
Procedure

NOTE: If you intend to accomplish this Repair during the same layover period as the
associated Inspection, the subsequent Preparation procedure is not necessary.

(a) Open the right TR cowl door (Door 462AR), refer to Ref. AMM Task 78-36-00-010-
802.
(b) Put on and attach a safety harness before you start work in the work area.
C. PROCEDURE
(1) Task A320-A-29-XX-1192-01001-920A-A (A320-A-29-XX-1192-01ZZZ-920Z-A)
Replace the Pylon/Engine Interface Lower Rod (Depending on the Inspection
Result), LH side
Job Set-Up Information
Working Area

Impacted Zone Access / Work Location


470 Access Door 452AR
Manpower/Resources/Skills

Man-hours 1.00 h
Minimum Number of person 1
Elapsed Time 1.00 h
Skills Airframe
Material necessary to do the job
Components
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
1 D0003107000400 1 ROD (1)
NOTE(S)
(1): The components listed above are not an AIRBUS Kit, the required parts must be
ordered as necessary through the given channel.
Referenced Information

Manuals/Drawings References/Sheets
06-20-00
AMM Task 29-15-61-000-801
Task 29-15-61-400-801
Procedure

REV 00 May 31/21 A320-29-1192


REV 01 Nov 29/22 Page 62
A318/A319/A320/A321
SERVICE BULLETIN

(a) Standard Practices given in this procedure:


1 For the identification of zones, refer to Ref. AMM 06-20-00.
2 Put all the retained hardware in identified plastic bags and attach the bags
to the related unit.
CAUTION: DURING THE ROD INSTALLATION / ADJUSTMENT, MAKE SURE THAT
THE BALANCED ADJUSTMENT BETWEEN UPPER AND LOWER ROD
ENDS IS ACHIEVED, THAT IS, EQUAL THREAD LENGTH ENGAGED
IN THE ROD BODY.

(b) Replace the LH pylon/engine interface lower rod (depending on the inspection
result), refer to Ref. Fig.BC Replacement of the LH Pylon/Engine Interface Lower
Rod.
1 Remove the LH pylon/engine interface lower rod, refer to Ref. AMM Task 29-
15-61-000-801:

1 ROD   Item (1) Discard


2 Install the LH pylon/engine interface lower rod, refer to Ref. AMM Task 29-
15-61-400-801:

1 ROD D0003107000400 Item 1

REV 00 May 31/21 A320-29-1192


REV 01 Nov 29/22 Page 63
A318/A319/A320/A321
SERVICE BULLETIN

CONF ALL

Z470

A
B

B
ICN-A320-A-29XX1192-A-FAPE3-023W4-A-002-01

Figure ICN-A320-A-29XX1192-A-FAPE3-023W4-A-002-01 Fig.BC Sol.AA SHEET 1/2


REV 00 May 31/21 A320-29-1192
Replacement of the LH Pylon/Engine Interface Lower Rod
REV 01 Nov 29/22 Page 64
A318/A319/A320/A321
SERVICE BULLETIN

CONF ALL

INTERFACE PLATE

(1)
1

FITTING

ICN-A320-A-29XX1192-A-FAPE3-023W5-A-003-01

Figure ICN-A320-A-29XX1192-A-FAPE3-023W5-A-003-01 Fig.BC Sol.AA SHEET 2/2


REV 00 May 31/21 A320-29-1192
Replacement of the LH Pylon/Engine Interface Lower Rod
REV 01 Nov 29/22 Page 65
A318/A319/A320/A321
SERVICE BULLETIN

(2) Task A320-A-29-XX-1192-02001-920A-A (A320-A-29-XX-1192-02ZZZ-920Z-A)


Replace the Pylon/Engine Interface Upper Rod (Depending on the Inspection
Result), LH side
Job Set-Up Information
Working Area

Impacted Zone Access / Work Location


470 Access Door 452AR
Manpower/Resources/Skills

Man-hours 1.00 h
Minimum Number of person 1
Elapsed Time 1.00 h
Skills Airframe
Material necessary to do the job
Components
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
2 D0003107000600 1 ROD (1)
NOTE(S)
(1): The components listed above are not an AIRBUS Kit, the required parts must be
ordered as necessary through the given channel.
Referenced Information

Manuals/Drawings References/Sheets
06-20-00
AMM Task 29-15-61-000-801
Task 29-15-61-400-801
Procedure
(a) Standard Practices given in this procedure:
1 For the identification of zones, refer to Ref. AMM 06-20-00.
2 Put all the retained hardware in identified plastic bags and attach the bags
to the related unit.
CAUTION: DURING THE ROD INSTALLATION / ADJUSTMENT, MAKE SURE THAT
THE BALANCED ADJUSTMENT BETWEEN UPPER AND LOWER ROD
ENDS IS ACHIEVED, THAT IS, EQUAL THREAD LENGTH ENGAGED
IN THE ROD BODY.

(b) Replace the LH pylon/engine interface upper rod (depending on the inspection
result), refer to Ref. Fig.BD Replacement of the LH Pylon/Engine Interface Upper
Rod.
1 Remove the LH pylon/engine interface upper rod, refer to Ref. AMM Task
29-15-61-000-801:

1 ROD   Item (2) Discard


2 Install the LH pylon/engine interface upper rod, refer to Ref. AMM Task 29-
15-61-400-801:

1 ROD D0003107000600 Item 2

REV 00 May 31/21 A320-29-1192


REV 01 Nov 29/22 Page 66
A318/A319/A320/A321
SERVICE BULLETIN

CONF ALL

Z470

A
B

B
ICN-A320-A-29XX1192-A-FAPE3-023W6-A-002-01

Figure ICN-A320-A-29XX1192-A-FAPE3-023W6-A-002-01 Fig.BD Sol.AA SHEET 1/2


REV 00 May 31/21 A320-29-1192
Replacement of the LH Pylon/Engine Interface Upper Rod
REV 01 Nov 29/22 Page 67
A318/A319/A320/A321
SERVICE BULLETIN

CONF ALL

(2)
2

FITTING

INTERFACE PLATE

ICN-A320-A-29XX1192-A-FAPE3-023W7-A-003-01

Figure ICN-A320-A-29XX1192-A-FAPE3-023W7-A-003-01 Fig.BD Sol.AA SHEET 2/2


REV 00 May 31/21 A320-29-1192
Replacement of the LH Pylon/Engine Interface Upper Rod
REV 01 Nov 29/22 Page 68
A318/A319/A320/A321
SERVICE BULLETIN

(3) Task A320-A-29-XX-1192-03001-920A-A (A320-A-29-XX-1192-03ZZZ-920Z-A)


Replace the Pylon/Engine Interface Lower Rod (Depending on the Inspection
Result), RH side
Job Set-Up Information
Working Area

Impacted Zone Access / Work Location


480 Access Door 462AR
Manpower/Resources/Skills

Man-hours 1.00 h
Minimum Number of person 1
Elapsed Time 1.00 h
Skills Airframe
Material necessary to do the job
Components
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
1 D0003107000400 1 ROD (1)
NOTE(S)
(1): The components listed above are not an AIRBUS Kit, the required parts must be
ordered as necessary through the given channel.
Referenced Information

Manuals/Drawings References/Sheets
06-20-00
AMM Task 29-15-61-000-801
Task 29-15-61-400-801
Procedure
(a) Standard Practices given in this procedure:
1 For the identification of zones, refer to Ref. AMM 06-20-00.
2 Put all the retained hardware in identified plastic bags and attach the bags
to the related unit.
CAUTION: DURING THE ROD INSTALLATION / ADJUSTMENT, MAKE SURE THAT
THE BALANCED ADJUSTMENT BETWEEN UPPER AND LOWER ROD
ENDS IS ACHIEVED, THAT IS, EQUAL THREAD LENGTH ENGAGED
IN THE ROD BODY.

(b) Replace the RH pylon/engine interface lower rod (depending on the inspection
result), refer to Ref. Fig.BE Replacement of the RH Pylon/Engine Interface Lower
Rod.
1 Remove the RH pylon/engine interface lower rod, refer to Ref. AMM Task
29-15-61-000-801:

1 ROD   Item (1) Discard


2 Install the RH pylon/engine interface lower rod, refer to Ref. AMM Task 29-
15-61-400-801:

1 ROD D0003107000400 Item 1

REV 00 May 31/21 A320-29-1192


REV 01 Nov 29/22 Page 69
A318/A319/A320/A321
SERVICE BULLETIN

CONF ALL

Z480

B
ICN-A320-A-29XX1192-A-FAPE3-023WA-A-002-01

Figure ICN-A320-A-29XX1192-A-FAPE3-023WA-A-002-01 Fig.BE Sol.AA SHEET 1/2


REV 00 May 31/21 A320-29-1192
Replacement of the RH Pylon/Engine Interface Lower Rod
REV 01 Nov 29/22 Page 70
A318/A319/A320/A321
SERVICE BULLETIN

CONF ALL

INTERFACE PLATE

(1)
1

FITTING

ICN-A320-A-29XX1192-A-FAPE3-023WB-A-003-01

Figure ICN-A320-A-29XX1192-A-FAPE3-023WB-A-003-01 Fig.BE Sol.AA SHEET 2/2


REV 00 May 31/21 A320-29-1192
Replacement of the RH Pylon/Engine Interface Lower Rod
REV 01 Nov 29/22 Page 71
A318/A319/A320/A321
SERVICE BULLETIN

(4) Task A320-A-29-XX-1192-04001-920A-A (A320-A-29-XX-1192-04ZZZ-920Z-A)


Replace the Pylon/Engine Interface Upper Rod (Depending on the Inspection
Result), RH side
Job Set-Up Information
Working Area

Impacted Zone Access / Work Location


480 Access Door 462AR
Manpower/Resources/Skills

Man-hours 1.00 h
Minimum Number of person 1
Elapsed Time 1.00 h
Skills Airframe
Material necessary to do the job
Components
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
2 D0003107000600 1 ROD (1)
NOTE(S)
(1): The components listed above are not an AIRBUS Kit, the required parts must be
ordered as necessary through the given channel.
Referenced Information

Manuals/Drawings References/Sheets
06-20-00
AMM Task 29-15-61-000-801
Task 29-15-61-400-801
Procedure
(a) Standard Practices given in this procedure:
1 For the identification of zones, refer to Ref. AMM 06-20-00.
2 Put all the retained hardware in identified plastic bags and attach the bags
to the related unit.
CAUTION: DURING THE ROD INSTALLATION / ADJUSTMENT, MAKE SURE THAT
THE BALANCED ADJUSTMENT BETWEEN UPPER AND LOWER ROD
ENDS IS ACHIEVED, THAT IS, EQUAL THREAD LENGTH ENGAGED
IN THE ROD BODY.

(b) Replace the RH pylon/engine interface upper rod (depending on the inspection
result), refer to Ref. Fig.BF Replacement of the RH Pylon/Engine Interface Upper
Rod.
1 Remove the RH pylon/engine interface upper rod, refer to Ref. AMM Task
29-15-61-000-801:

1 ROD   Item (2) Discard


2 Install the RH pylon/engine interface upper rod, refer to Ref. AMM Task 29-
15-61-400-801:

1 ROD D0003107000600 Item 2

REV 00 May 31/21 A320-29-1192


REV 01 Nov 29/22 Page 72
A318/A319/A320/A321
SERVICE BULLETIN

CONF ALL

Z480

B
ICN-A320-A-29XX1192-A-FAPE3-023W8-A-002-01

Figure ICN-A320-A-29XX1192-A-FAPE3-023W8-A-002-01 Fig.BF Sol.AA SHEET 1/2


REV 00 May 31/21 A320-29-1192
Replacement of the RH Pylon/Engine Interface Upper Rod
REV 01 Nov 29/22 Page 73
A318/A319/A320/A321
SERVICE BULLETIN

CONF ALL

(2)
2

FITTING

INTERFACE PLATE

ICN-A320-A-29XX1192-A-FAPE3-023W9-A-003-01

Figure ICN-A320-A-29XX1192-A-FAPE3-023W9-A-003-01 Fig.BF Sol.AA SHEET 2/2


REV 00 May 31/21 A320-29-1192
Replacement of the RH Pylon/Engine Interface Upper Rod
REV 01 Nov 29/22 Page 74
A318/A319/A320/A321
SERVICE BULLETIN

D. PREPARATION FOR TEST


None
E. TEST
None
F. CLOSE-UP
(1) Task A320-A-29-XX-1192-05001-740A-A (A320-A-29-XX-1192-05ZZZ-740Z-A)
Close the Access on the LH Engine
Job Set-Up Information
Manpower/Resources/Skills

Man-hours 1.00 h
Minimum Number of person 2
Elapsed Time 0.50 h

Referenced Information

Manuals/Drawings References/Sheets
AMM Task 78-36-00-410-802
Procedure
(a) Make sure that the work areas are clean and clear of tools and other items of
equipment.
(b) Close the right TR cowl door (Door 452AR), refer to Ref. AMM Task 78-36-00-410-
802.
(2) Task A320-A-29-XX-1192-06001-740A-A (A320-A-29-XX-1192-06ZZZ-740Z-A)
Close the Access on the RH Engine
Job Set-Up Information
Manpower/Resources/Skills

Man-hours 1.00 h
Minimum Number of person 2
Elapsed Time 0.50 h

Referenced Information

Manuals/Drawings References/Sheets
AMM Task 78-36-00-410-802
Procedure
(a) Make sure that the work areas are clean and clear of tools and other items of
equipment.
(b) Close the right TR cowl door (Door 462AR), refer to Ref. AMM Task 78-36-00-410-
802.
(3) Task A320-A-29-XX-1192-02001-740A-A (A320-A-29-XX-1192-02ZZZ-740Z-A)
Close-Up
Job Set-Up Information
Manpower/Resources/Skills

Man-hours 0.25 h

REV 00 May 31/21 A320-29-1192


REV 01 Nov 29/22 Page 75
A318/A319/A320/A321
SERVICE BULLETIN

Minimum Number of person 1


Elapsed Time 0.25 h

Procedure
(a) Remove the warning notice(s) in the cockpit on the overhead panel and ENG
START section of Panel 22VU.
(b) Put the aircraft back to its initial configuration.
G. ADMINISTRATIVE
(1) Task A320-A-29-XX-1192-03001-90AA-A (A320-A-29-XX-1192-03ZZZ-90AZ-A)
Administrative

Procedure
Confirm in the applicable aircraft records that you have completed all the work defined
in this Service Bulletin task set as required.

REV 00 May 31/21 A320-29-1192


REV 01 Nov 29/22 Page 76
A318/A319/A320/A321
SERVICE BULLETIN
APPENDIX
APPENDIX
A. MANPOWER GANTT CHART
Manpower Gantt Chart
For an explanation of the man-hours and elapsed time, refer to the next page.

REV 00 May 31/21 A320-29-1192


REV 01 Nov 29/22 Page 77
A318/A319/A320/A321
SERVICE BULLETIN
APPENDIX
CONF ALL

01
ELAPSED TIME ASSUMPTION SERVICE BULLETIN No A320-29-1192
02

STEPS MH PER ET/S

JOB SET UP 0.25 1 0.25

OPEN ACCESS ON LH ENGINE 1.00 2 0.50

OPEN ACCESS ON RH ENGINE 1.00 2 0.50

DO A DETAILED INSPECTION OF THE LH: 0.75 1 0.75


- PYLON ROD END FITTINGS
- INTERFACE PLATE ROD END FITTINGS
- INTERFACE PLATE
- UPPER SUPPORT BRACKET
- FRONT SUPPORT BRACKET
- PYLON/ENGINE INTERFACE ROD ENDS

DO A DETAILED INSPECTION OF THE RH: 0.75 1 0.75


- PYLON ROD END FITTINGS
- INTERFACE PLATE ROD END FITTINGS
- INTERFACE PLATE
- UPPER SUPPORT BRACKET
- FRONT SUPPORT BRACKET
- PYLON/ENGINE INTERFACE ROD ENDS

COMPLETE AND SEND THE 0.25 1 0.25


INSPECTION REPORT SHEET

CLOSE ACCESS ON LH ENGINE 1.00 2 0.50

CLOSE ACCESS ON RH ENGINE 1.00 2 0.50

CLOSE-UP 0.25 1 0.25

0 0.5 1 1.5 2 2.5

TOTAL MANHOURS 6.25 SB ELAPSED TIME


SB ELAPSED TIME 2.50 (HOURS)

NOTE:
01 THIS CHART IS ONLY A PROPOSAL.
OPERATORS MAY DETERMINE THAT ANOTHER WAY
TO DO THE WORK IS MORE SUITABLE FOR THEM.
MH : MANHOURS 02 IF A VSB IS INVOLVED, THE ASSOCIATED MANHOURS
PER : NUMBER OF PERSONS ARE NOT REFLECTED IN THIS GANTT CHART.
ET/S: ELAPSED TIME PER STEP ICN-A320-A-29XX1192-A-FAPE3-023W1-A-005-01

Figure ICN-A320-A-29XX1192-A-FAPE3-023W1-A-005-01 Fig.AA Sol.AA SHEET 1/1


REV 00 May 31/21 A320-29-1192
Gantt Chart
REV 01 Nov 29/22 Page 78
A318/A319/A320/A321
SERVICE BULLETIN
APPENDIX
B. REPORTING SHEET

TITLE: HYDRAULIC POWER - MAIN HYDRAULIC POWER - GENERAL - PYLON/


ENGINE INTERFACE ROD END INSPECTION

MODIFICATION No.: None


(1) SB Reporting status
This Service Bulletin will only be incorporated into affected customized Maintenance
and Flight Operations Products if it is duly reported to Airbus.
(2) GENERAL information
The SB Reporting policy is published in ISI 00.00.00135. This document provides
information regarding: the SB Reporting means and benefits, the update of
customized Maintenance Products and customized Flight Operations Products.
If this Service Bulletin has an operational impact, refer to paragraph "Flight Operations
Products" for further information on the update of affected Flight Operations Products.
(3) SB Reporting procedure
Standard practice to report SB is to use the online reporting application on
AirbusWorld.
Refer to ISI 00.00.00179:

- For complete information on reporting means to Airbus, Question 2 "What are


the standard practices for SB Reporting?"
- If this SB requires previous or simultaneous accomplishment of other SBs,
Question 3 "What about the reporting of prerequisite Service Bulletins?"

NOTE: ISI 00.00.00179 covers all the frequently asked questions about SB Reporting.
It is revised on a regular basis.

REV 00 May 31/21 A320-29-1192


REV 01 Nov 29/22 Page 79
A318/A319/A320/A321
SERVICE BULLETIN
APPENDIX
C. QUALITY PERCEPTION FORM
Use this form to tell us what is your perception of the quality of this Service Bulletin.
The reported data that you provide us will be used to analyse areas of difficulties and to
take corrective action to further improve the quality of our Service Bulletin.
We thank you for the time you have taken in completing this form.

Quality rating of this SB 4 3 2 1


Quality rating of the Accomplishment Instructions 4 3 2 1
Quality rating of the Illustrations 4 3 2 1
Is this SB easy to understand ? Y/N

NOTE: Please rate on a scale of 1 to 4, with 4 being the highest score

If you have difficulties in the accomplishment of this SB please quote below the area(s) and
give a short description of the issue.

Planning Material Instructions


X Applicability X Tooling X Preparation
X Reason X List of Materials X Mod/Inspection
Operator Supplied
X Manpower X Kit content X Test
X References X Re-identification X Close-up
X Publication X Illustrations
X Industry Support

Comments :

Operator : Date :
Name/Title
Please return this form to :
AIRBUS
2, ROND POINT EMILE DEWOITINE
31700 BLAGNAC
FRANCE
Or via your Resident Customer Support Office.

REV 00 May 31/21 A320-29-1192


REV 01 Nov 29/22 Page 80

You might also like