To install a water tank, first elevate and level the site before drawing a circle for the tank foundation. Then build a concrete ring beam and spread sand inside for the tank base. Install the tank wall panels starting from the bottom, securing each section with hoop rings until reaching the top. Finally, add fittings, a roof, and manhole cover before filling the tank with water.
To install a water tank, first elevate and level the site before drawing a circle for the tank foundation. Then build a concrete ring beam and spread sand inside for the tank base. Install the tank wall panels starting from the bottom, securing each section with hoop rings until reaching the top. Finally, add fittings, a roof, and manhole cover before filling the tank with water.
To install a water tank, first elevate and level the site before drawing a circle for the tank foundation. Then build a concrete ring beam and spread sand inside for the tank base. Install the tank wall panels starting from the bottom, securing each section with hoop rings until reaching the top. Finally, add fittings, a roof, and manhole cover before filling the tank with water.
2. Find out the centre of the tank Draw circle according to the diameter of the tank 3. Build Concrete foundation for Ring Beam According to the drawn line 4. Inside the Ring Beam spread fine sand for sand pad 5. Place the liner on the sand pad before the wall panel install 6. Install the 1st Strake Ensure that the 1st Strake is Dead Level and Perfectly Round 7. Install the bottom hoop ring and attach to ring beam 8. Install the 2nd Strike 9. Install the 3rd Strike 10. Install the top hoop ring 11. Install ladder, gauge, protective tapping, and mounting plates for fittings 12. Fit, secure and trim the liner 13. Install fittings 14. Install roof trusses 15. Fit, secure and trim the roof sheeting 16. Install lockable manhole cover 17. Fill the tank immediately to a minimum 10% of its volume