Professional Documents
Culture Documents
T8K MUSIC 英文版说明书
T8K MUSIC 英文版说明书
System characteristics
1. 8-port music controller, with MIC and earphone audio input interface.
Adjust the sensitivity of the audio reception through the potentiometer on the
panel.
2, 8 data output, each port can be with 1024 points, multiple controllers can be
In order to achieve synchronization through the line.
3, do the effect program select the controller model T-8000-1903 or
K-8000, copy the finished files into the SD card and insert them into the controller.
Operating instruction
1. Long press the MODE key on the panel to switch between normal MODE and
music mode (Long press the Mode key to switch the display from P-XX to
C-XX is normal mode to music mode, or from C-XX to P-XX is music mode to normal
mode).
2. Press MODE to switch programs in normal mode, and A-01 is displayed as all
program cycles.
3. In the normal mode, select the controlled chip through the SET chip selection
button on the panel. Supported chip models:
UCS19**UCS29**TM18**WS281*SM1670*GS8205GS8206, 681298239883
TM1914LPD1886, 68035109,81098806 167169813 and DMX, DMX512 and other
chips if you need to add other chip support, please inform your supplier.
4. In music mode, only circular mode and random mode can be selected.
5. The multi-program loop in Music mode and the time for randomly playing each
program is set via an EXCEL profile in the SD card
The running time of each program in a file named musicT.csv. Each line corresponds
to the program number of the file in sequence. The number of the first line
corresponds to the number of playing seconds of the first program, and the
number of the second line is the number of playing seconds of the second file
program. If the number is 5, the program will be played in 5 seconds and switched
to the next program, and the maximum number is 30,000 seconds. If this playback
time profile is not available or an error occurs, the default playback time is 1
minute per program.
6, each controller has a microphone head and headphone hole, in the cascaded
mode, only the host to receive music signals, the subsequent cascaded slave only
receive
Synchronization signal of the host.
7, the controller can support up to 80 program playback, can bring a variety of
music does not repeat the cool effect, controller system
The effect is played at 800 frames. The controller can also be divided into two
playback modes: volume control amplitude mode below 800 frames and volume
control speed mode above 800 frames.
8, SET button to adjust the volume control speed mode sensitivity H-01 to H-12
level, further increase the difference of display effect
Make the scene more cool. The controller panel also has an adjustable sensitivity
knob to further adjust the visual effects of the music.
9. Press the button to adjust the appropriate playback speed. After playing the
program control chip, you need to wait 8 seconds
Information, do not need to reset the next boot.
10. The manual can be affixed to the reverse side of the iron box cover for the
convenience of site engineering personnel to read and debug