Professional Documents
Culture Documents
Quietrock Es Submittal 35235C86 AB5D 23DF 33D2 22F0D808BDA9
Quietrock Es Submittal 35235C86 AB5D 23DF 33D2 22F0D808BDA9
MANUFACTURER INFORMATION:
PABCO® Gypsum
a division of PABCO® building products, LLC
37851 Cherry Street
Newark, CA 94560 Type X Sound Reducing Panel
800-797-8159
www.PABCOgypsum.com
www.QuietRock.com
PABCO® Specification PGS-021 ES panels have been tested and approved on spacing and fastener type and installed as
many fire-resistance assemblies and are suitable tested. To qualify for listed sound ratings, the
for new construction or renovation projects use of acoustical sealants/caulking, acoustical
in commercial, multi-family or single-family putty, insulation or clips are generally added to
DESCRIPTION: residential applications. the systems as detailed in the test report. When
an assembly is both fire and sound rated, the
QuietRock® EZ-SNAP® (ES) is a sound reducing,
LIMITATIONS: strictest requirements prevail.
constrained-layer damped (CLD) gypsum panel,
comprised of a proprietary viscoelastic polymer • QuietRock® ES panels are intended for interior
SOUND CONTROL:
center, enhanced high density gypsum core applications, and shall not be stored or
manufactured to meet or exceed ASTM C1396. applied where there will be direct exposure QuietRock® ES panels are manufactured
The core has been bisected to completely to water or continuous high humidity before, using a unique combination of patented
eliminate inner layers of paper in the product for during, or after construction. technologies including gypsum core and
enhanced workability. • Avoid exposure to temperatures exceeding viscoelastic polymers designed for sound
125° F (52° C) for an extended period of time. control in partitions as compared to standard
QuietRock® ES panels are encased in 100% • QuietRock® ES is a non-structural panel; gypsum panels. In independent laboratory
recycled paper on the face, back, and sides. A not intended to be used as a structural tests per ASTM E90 (Standard Test Method for
non-removable edge tape is applied to the long fastener base or to support wall or ceiling Laboratory Measurement of Airborne Sound
edges folded around both sides of the panel mounted objects. Transmission Loss of Building Partitions and
to reinforce and protect the core; the ends are Elements), QuietRock® ES panels improve
square cut and finished smooth. The long edges APPLICATION: STC ratings on various framing materials. The
of panels are tapered providing a recessed area application of QuietRock® ES on a floor/ceiling
QuietRock® ES panels are designed for direct
that allows joints to be reinforced and concealed assembly may improve the Impact Isolation
mechanical (nail or screw) or adhesive attachment
with joint treatment (joint compound and Class (IIC) performance as lab tested per ASTM
to wood or metal framing. QuietRock® ES panels
tape) creating a monolithic decorating surface. E492 (Standard Test Method for Laboratory
may also be attached to existing surfaces using
QuietRock® ES is manufactured with a patented Measurement of Impact Sound Transmission
fasteners or adhesives. Install panels vertically
viscoelastic polymer damping layer that Through Floor-Ceiling Assemblies). Although
on walls to create the optimum finishing and
provides enhanced Sound Transmission Class the word soundproofing is often used within
decorating surface. QuietRock® ES will achieve
(STC) performance compared to conventional the industry to describe the process of reducing
any level finish as easily as standard gypsum
gypsum panel products. sound transmission, no material may be
panels when finished per GA 214. With the
classified as soundproof. As with any acoustic
wallboard joints properly treated, QuietRock®
PRIMARY USES: treatment, flanking paths (i.e. back-to-back
ES panels will resist the passage of smoke.
penetrations, poorly sealed openings, or direct
QuietRock® ES sound reducing panels are PABCO® Gypsum endorses and recommends
room-to-room ductwork) can result in loss
designed for both fire-resistance rated interior GA-216 (www.gypsum.org) and ASTM C840
of sound reduction. The use of good design,
wall assemblies and non-fire-resistance rated (www.astm.org) as its application specification.
handling and construction practices is critical to
interior wall and ceiling assemblies where
any acoustically-rated and/or fire rated assembly.
sound attenuation performance is a primary For fire and sound rated systems it is important
This includes sealing all penetrations and wall
consideration. QuietRock® ES is engineered to to consult the appropriate listing or test report
perimeters with acoustically rated sealants (i.e.
replace multiple layers of drywall in assemblies to for the complete assembly documentation and
QuietSeal® Pro and QuietPutty®).
shorten build and inspection time with minimal related information. These systems must be
impact to usable floor space. The 100% paper- installed in strict compliance with the detailed
free core of QuietRock® ES allows for improved test assembly description, including core types
workability by reducing cutting time. QuietRock® and other components such as studs, fastener
continued on back
Job name:
dmr
Contractor: Date:
dmr 01/14/2023
QUIETROCK ES
FIRE RESISTANT RATINGS:
Fire-Resistance Rated Designs are promulgated
from tests performed at IAS* certified
P/N: 111-00048-032621