Professional Documents
Culture Documents
Power Electronics Lab Manual
Power Electronics Lab Manual
Features:SPECIFICATIONS/FRONT PANEL DETAILS: 1. Power :: Mains ON/OFF switch with indicator 2. Devices :: 8A/600V MOSFET,IIGBT 3.Power Supply :: 0-15V/250mA,0-35V/500mA 4. Load :: 2.5K OHMS/25W 5.Digital Meters:: 0-20V for VE,0-200V for VBB,, 0-200mA for IE 6.Protection :: Fuse, Heat sink EXPERIIMENT To draw static characteristics off UJT
SPECIFICATION/FRONT PANEL DETAILS 1. Power :: Mains ON/OFF switch with indicator 2.Devices :: 4A/400V SCR 3. Power Supply :: 0-12V/1A, AC 4. Load :: 100OHMS/10W 5.Circuit : Line synchronized UJT relaxation oscillator circuit 6. Protection :: Fuse , Heat sink EXPERIIMENT To construct SCR HWR//FWR using UJT Triggering
5. Study of the single phase half wave controlled rectifier and semi converter circuit with R and R-L Load
Isolation Transformer
1Ph half bridge firing unit
L Load
SPECIIFIICATIIONS//FRONT PANEL DETAIILS Power Circuit :: 5A//250V 1.Devices :: 25A/1200V SCRs 2No, Diode 3 No 2. Protection:: 6A MCB, 5A Fuses, Heat sink, Snubber ckts 3. Meters :: 5A Ammeter, 300V voltmeter Firing Circuit 1. Power :: Mains ON/OFF switch with indicator 2.Gate pulses :: Two isolated Gate pulses 3.Testing points :: Four testing points 4. Firing Angle :: 0--180 through potentiometer Input Source :: Through suitable isolation transformer Loads :: Works with Suitable R, RL, Motor loads
6. Study of single phase full wave controlled rectifier circuits (mid point and Bridge type) with R and R-L Load
Power Circuit :: 5A/250V 1. Devices :: 25A/1200V SCR 4Noss,Diode 1 No 2. Protection :: 6A MCB, 5A Fuses , Heat sink 3. Meters :: 5A Ammeter, 300V voltmeter
L Load
Isolation Transformer
Firing Circuit 1. Power :: Mains ON/OFF switch with indicator 2. Gate pulses :: Four isolated Gate pulses 3. Testing points :: Four testing points 4.Firing Angle :: 0--180 through potentiometer Input Source :: Through suitable isolation transformer Loads :: Works with Suitable R,RL, Motor loads Experiments Single phase fully wave controlled rectifier circuits (mid point and Bridge type) with R and R--L Load
7. Study of three phase full wave controlled rectifier circuits (Full and Semi converter) with R and R-L Load
L Load
Isolation transformer
SPECIFICATION FRONT PANEL DETAIILS Power Circuit :: 5A/430V 1. Devices : 25A/1200V Scars 6Noss, Diode 4 No 2. Protection:: 6A MCB, 5A Fuses, Heat sink, Snubber 3.Meters :: 5A Ammeter, 500V voltmeter Firing Circuit 1. Power :: Mains ON/OFF switch 2. Gate pulses :: Six isolated Gate pulses 3. Testing Points :: Eight testing points 4. Firing Angle :: 0--180 through potentiometer Input Source :: Through suitable isolation transformer Loads :: Works with Suitable R,, RL,, Motor loads Experiments Three phase full wave half/fully controlled rectifier circuits with R and R-L Load
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------Plot No-1775, 3rd Lane, Chintamaniswar, Bhubaneswar-751006 Phone: 0674-2314422, 6451025.Mob-09861445071 E-mail:dkgupta@shreebalajiedu.com, info@shreebalajiedu.com, www.shreebalajiedu.com
8. Study of the forward converter (Buck converter) and fly back converter (boost converter) operation.
SPECIFICATION FRONT PANEL DETAIILS:: 1. Power :: Mains ON/OFF switch with indicator 2. Devices:: 16A/800V MOSFET--1Nos, 16A/1200V Diodes--2Nos 3. Inductor :: 100 mH 4. Capacitor :: 4..7 F 5. Protection :: Fuse,, Heat sink,, Snubber ckts 6.Frequency :: 25Hz--100Hz 7. Duty cycle :: 10% to 90%.. 8. Gate signals :: One isolated gate signals EXPERIIMENT To construct & to study forward converter and fly back converter
1. 2. 3. 4. 5. 6. 7.
SPECIFICATION Devices :: 30A/1200V IGBT-4Nos, Diodes4Nos DC Supply :: 0--200V Variable DC power supply Gate pulses :: Four isolated Gate pulses Frequency :: 20 Hz to 50 Hz Modulation :: Sinusoidal modulation 0-100% index Display :: For modulation index & frequency Load :: Works with R,, RL & Motor load
10. Study the performance of three phase VSI with PWM control.
SPECIFICATIONS FRONT PANEL DETAIILS 1.Power :: Mains ON//OFF switch with indicator 2. Devices:: 30A/1200V IGBTs-6Nos, 16A/1200V Diodes--6Nos 3.DC Supply :: 0-200V Variable DC power supply 4. Gate pulses :: Six isolated Gate pulses 5. Testing Points :: Six testing points 6. Frequency :: 20 Hz to 50 Hz 7.Load :: Works with R,, RL & Motor load Experiments To construct & to study three phase VSI with PWM controls.
11. Study the performance of single phase AC Voltage controller with R and R-L Load
SPECIFICATION FRONT PANEL DETAIILS 1. Power Device :: 16A/1200V TRIIAC 1Nos,, 2.Protection :: Fuses, Heat sink,, Snub err ckts 3. Power :: Mains ON/OFF switch with indicator 4. Firing Circuit :: Line synchronized Triggering circuit 5. Firing Angle :: 0-1800 through potentiometer 6. Gate pulses :: Two isolated Gate pulse 7. Testing Points :: Six testing points Input Source :: Through built-in 24V isolation transformer Loads :: Works with R,, RL load Experiments AC Voltage controller with R and R-L Load