DDZ1513 Single Phase: Modular Integrated Smart Prepayment Meter (Class 1)

You might also like

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

DDZ1513 Single Phase

Modular Integrated Smart Prepayment Meter (Class 1)

HIGHLIGHT

IP54 TOU
HIGH
MODULAR STS
PROTECTION DLMS/COSEM LOAD PROFILE ANTI-TAMPER TIME OF USE
DESIGN COMPLIANCE
DEGREE

Inhemeter’s DDZ1513 is Single Phase multi-functions smart meter with modular design. The meter is used to measure electrical energy
accurately for commercial and residential customers. With flexible communication module meter provides varieties communication media
for remote management and reading.

This meter can be utilized for prepayment (Comply with STS standard) and post payment applications (selectable by utility company)
DDZ1513 has excellent anti-tamper feature like terminal cover detection to help utility for revenue protection. DDZ1513 can utilize different
communication medias to Data Concentrator (for Smart Metering application) like PLC, RF or directly use GPRS to Central system based on
customer requirements. Because this meter has keypad for entering token, CIU is optional communication media like PLC, Cable or RF can
be also supported.
DDZ1513 Single Phase
Modular Integrated Smart Prepayment Meter (Class 1)

Specification

Accuracy Real-time Clock


Active energy Class 1 (IEC62053-21) Columnar battery, 3.6V lithium-ion battery capacity
Reactive energy Class 2 (IEC62053-23) (optional) Real-time clock back-up ≥1200mAh
Impulse 1000 imp/kWh, 1000imp/kvarh(optional) power supply After power failure, the battery can support clock
Voltage working more than 10 years, two years shelf time
Working voltage Upper limit value:264.5V, lower limit value:184V Time of Use
Maximum voltage 500V (48 hours) Multiple tariffs & Time-of-Use (TOU) billing
Short-time withstand Rate (8 tariffs, 24 time intervals, 16 daily tariffs, 2 weekly
600V AC tariffs, 12 seasonal tariffs, 50 holiday tariffs)
Over-voltage (1 minute)
Nominal voltage 230 Special days Up to 200 programmable special days
Frequency 50Hz±5Hz Communication
Current Infrared communication According IEC62056-21 C mode
Rated current 5A Communication Hot Swap Modules GPRS/3G cellular modem,
Maximum current 80A module PLC, RF
Over-current in short time 30Imax Universal serial communications port
Starting current Versatile RS-232/485
20mA (up to 115,200 bps)
Limit current for accurate metering 1.2×Imax Communication Protocols DLMS/COSEM
Meter Operation Load Profile
Voltage circuit of each phase: Number of channel 8 programmable channel and Interval
<1.5W ( or <8VA ) @230V and interval programmable from 1 minute to 60 minutes
Power consumption
Current circuit of each phase: Capacity 1 channel time interval 15 minutes is 80 days
<0.2VA@Base Reference Current (Ib) Mechanical Specification
Internal Relay Weight Around 600g
Unipolar bi-stable latching relay 100A Protection class IP54, Comply with IEC60529-4
Load switch standard grade: Dimension 210.0mm X 135.0mm X 72.0mm
UC3 (IEC62055-31) Housing protection grade IP54 IEC60529-4
Current ON 2400A, 6000A to withstand
short-circuit current Fire retardant, flame resistant, thermal
Maximum switching power interrupting deformation engineering plastic PC+GF
device: 22500VA Inflaming retardant test comply with 960 °C
Housing Material glow wire test requirement (IEC60695-2-1)
Input and Output
Meter impulse output LED, optoelectronic isolation Fire resistant test: UL94 -V0 rated @1.5mm
Environmental Condition No toxic gases emitted: green material
Working temperature range -25°C~+85°C Terminal and Sealing
Storage temperature range -40°C~+85°C Terminals layout complies with BS5685/ DIN 43857
Terminals Two screws on the pressure-plate main terminal
Relative humidity range is 0~95% at The material is rust-proof
maximum temperature of 55°C Fire retardant, flame resistant, anti-thermal
Humidity requirement During thenight: 100% relative humidity(max) deformation engineering plastic PC+20%GF
During the day: 25% relative humidity
Terminal material Flame retardant test: pass 960°C glow wire test
Used in region with altitude less than 3500m a.s.l.
(IEC60695-2-1)
Lightning protection Built-in varistor protection can be applied Fire resistant test: UL94-V0 rated @1.5mm
to protect from lightning No toxic gases emitted: green material
Altitude Less than 3500m a.s.l.
Four seals on meter:
Real-time Clock
1)Two manufacturer seals on the top of meter cover
Real-time clock frequency Oscillator frequency 32.768kHz
Sealing 2) One seal for terminal cover
Real-time clock accuracy ≦5ppm
3) One seal on communication module

www.inhemeter.com
Copyright © 2019 Inhemeter Co., Ltd. All rights reserved.

You might also like