Professional Documents
Culture Documents
Hitachi Sumitomo SCX550
Hitachi Sumitomo SCX550
View thousands
thousands of
of Crane
Crane Specifications
Specifications on
on FreeCraneSpecs.com
FreeCraneSpecs.com
nDimensions Unit : mm
s) ing
diu sw
ar 00
ra nd
(re 38
-e
Basic Boom Length : 10 m
R
Maximum Boom Length : 52 m
4750 1000
3240 Engine Power : 147 kW (200 PS)
940
5320
3200
3190
1590
1100
965
360
760
4710 3600(2540)
5550 4360(3300)
Notes : Dimensions shown in( )are with side frames fully retracted.
1 2
1 Keyed Auto Brake
Fine Inching with the Lever-mounted Mode Release Switch
Drum Rotation Sensing System Pilot-Control Shutoff Lever
This switch disables transfer from
Dependable inching operation is ensured even when the load is invisible -- i.e., deep crane Prevents Misoperation
auto brake mode to free fall mode. During Operator
operation under the ground with the help of a signal man, or extracting piles with a Cushioned Boom Stops Ingress and Egress
2 Keyed Auto Stop Release Switch
vibration hammer. The system enables the operator to feel drum rotation beginning at the A cushioned boom stop mechanism is
The auto stop release switch is fitted Drum Locking Mechanism
fingertips. provided to reduce shock due to abrupt
with a key to prevent inadvertent release Each drum is locked automatically when
Coupled with the fine-speed control system featuring a wide control range, increases stops such as automatic stops from
of auto stop devices. the key switch is set to OFF or ACC
controllability and productivity are increased. boom over-hoisting or overloading.
position.
Interlock System
This system does not allow the engine
to start unless the swing brake is locked
and the hoisting brake is set
to the auto brake mode.
Operator Comfort and Electric Finger-Touch Independent Fine-Speed Secondary Boom Overhoist Brake Mode Selector
Operating Ease Accelerator Grip Control of the Boom Prevention Device
The brake mode selector is provided on
lElectric tilt-type lever stand and The electric finger-touch accelerator grip, With a dial switch, boom hoisting/lower-ing Even if the boom or hook overhoist the lever stand. Indicators enable the
adjustable deluxe seat provided atop the swing lever, is a new speeds can be adjusted, continuously and prevention device fails, the secondary
lLarge, curved front glass window for independently, within a 20% to 100% operator to differentiate brake mode at
control system, featuring good throttle boom overhoist prevention device
upward/downward visibility range of normal speed to adapt to slight a glance.
response. The operator can choose from prevents boom and/or hook
lShort-type lever allowing lever-to-lever changes in working radius. Auto brake mode(green indicator)
the accelerator grip, or the conventional overhoisting. Alarm bell and buzzer
spacing adjustment sound to warn the operator. Also, the Free fall mode(red indicator)
accelerator lever and pedals according
lNew-type Moment Limiter with large engine shut down to prevent damage
to job requirements.
screen display due to boom imbalance.
lQuiet cab thanks to shock-absorbing
rubber mounts and well-sealed sliding
door
lEmissions control engine
Note : lDecal and caution plates, affixed to the machine, vary depending on countries.
Pictured are those for the Japanese market. Note : The machine is painted in a customer's selected color.
lPictured includes optional equipment.
l"Ton" or "t" implies metric ton in this catalog. Note : The machine is painted in a
customer's selected color.