Professional Documents
Culture Documents
Powerplasma 50
Powerplasma 50
Powerplasma 50
PowerPlasma 50
BLOW BACK
IGBT OUTPUT
PROCESS: PAC with blowback start/Pilot Arc OCV: 200 V DIMENSIONS: 7.5”Wx14”Lx12.5”H
INPUT: 220-240V 1 Phase, 50/60Hz 50A RATED CUT: 9/16” WEIGHT: 35 lbs., unit only
OUPUT: 20-50A; 88-100V MAXIMUM CUT: 3/4 ” PROTECTION CLASS: IP21S
INVERTER TYPE: IGBT construction DUTY CYCLE: 60% @50A, 100% @ 40 A INSULATION GRADE: F
P
metal. On conventional systems, once the arc is interrupt
ed, the trigger must be released and pressed again to
ortability, performance, and price are what comes restart the arc. With the PowerPlasma pilot arc, once the
to mind when describing the PowerPlasma 50 from Ever- cutting arc is lost, the system automatically senses the
last. With 50 amps of cutting power and a tiny size, it is loss of voltage, reduces amperage, and transfers the arc
back to the torch head to complete the circuit to maintain
ideal for portable repair business that need a plasma an arc. No restarting is necessary when continuity to the
cutter for those on-site repairs. Small CFM and air com- work piece is regained.
pressor reserve requirements enable it to be used with
Power conserving IGBT inverter platform
almost any portable service compressor and generator/
welder. There’s no need for extended cables or torches Inverters have revolutionized the welding industry,
by reducing size and weight, while improving operating
because with the adjustable shoulder strap, the unit can
efficiency. The light-weight design offers the ultimate in
be carried almost anywhere, even over rugged terrain . portability and allows the cutter to be used with clean
power 8,500 watt generators. The use of IGBT tech-
The Siemens IGBT powered inverter enables the Power- nology improves inverter reliability and performance.
Plasma 50 to cut up to 3/4” cut when necessary, and
excellent quality cuts up to 9/16”. Low dross cuts can Blowback starting
be obtained over 1/2”. For most applications, this is There is no need for high frequency. The plasma cutter
the most plasma cutter that most people will ever starts the arc with air pressure forcing the spring loaded
electrode off its seat against the nozzle, creating an inter-
need.
Not many plasma cutters on the market come close to nal spark and igniting the plasma arc.
PAC
our price and performance level. With Everlast’s com- High duty cycle
mitment to customer service, the PowerPlasma 50 is one
With a high duty cycle of 60% at full power, the Power
of the best values in the industry.
Plasma 50 does not stop cutting very easily. But there
are times when you may reach or exceed the duty cycle.
When that happens the unit automatically shuts down
RATED CUTTING CAPACITY* until the unit has cooled down to safe operating range.
¾”
MAXIMUM
Adjustable post flow timer
Perfect control of post flow cooling of the torch can al-
MINIMUM ways be maintained. For high duty cycle requirements or
28 gauge thick cuts, time can be increased to improve consumable
and torch life.
*image not to scale, rated for best cut quality
PowerPlasma 50
Included Accessories* Universal Connector
S-45 Torch, 15 ft. 300 Amp Work Clamp Regulator /Filter for Consumable Kit
Cable Assembly Compressed Air Efficient and safe, the
Euro style quick-connect
offers interchangeability
with aftermarket torch
Up Close: brands like Trafimet®.