Professional Documents
Culture Documents
Isoflex Catalog Mount
Isoflex Catalog Mount
MACHINERY
MOUNTS
(Metric)
MAXImounts
The IsoFlex
MAXImount System
The high stability provided by IsoFlex mounts results in reduced thrust-induced
misalignment.
The IsoFlex MAXImount System designs each mount for optimum vibration isolation. The IsoFlex design improves the
mount’s ability to safely handle multi-directional loads as well as thrust in a 360 degree range.
There are no rubber components in an IsoFlex mount. Made of high quality engineering Polyurethane elastomers and
high tensile metals, IsoFlex mounts provide superior resistance to degradation in hostile environments.
Unlike competitive mounts, the selection process for the IsoFlex MAXImount System produces a mount and core
combination which identifies mount performance prior to installation. And, IsoFlex’s pre-installation software analysis
will identify the level of vibration isolation through a range of RPM. So you’ll know exactly what you’ll be getting.
Because they were originally developed to handle the extremes of marine environments,
IsoFlex mounts are the superior choice in general mounting applications.
IsoFlex MAXImounts are used in OEM manufacture, new installations and retrofits
• Marine engines and gearboxes • Motor homes, RVs and trailers • Instruments
• Marine structure • Machinery mounts for seismic • Industrial and manufacturing
• Vehicle mounted machinery applications machinery
• Power generation units • Shock isolation • Off-highway and construction
• Heating, Ventilation and • Compressors and pumps • Mining equipment
Air Conditioners • Diesel engine applications • Defence
• Desalination units • Hydraulic power packs • Electronics
MAXImounts
2 IsoFlex has made every effort to identify direct replacement mounts for common marine engines. However, these may vary due to original specification and
suppliers. It is the responsibility of the end user/customer to check correctness of fit and duty cycle, etc.
The dual-purpose system that isolates and
minimises vibration and produces maximum
load-carrying stability in 360 degrees.
MAXImount
Features Benefits
Vibration isolation. Minimising vibration reduces equipment fatigue,
human fatigue, maintenance and associated noise.
Cast with high quality engineering grade polymer. No rubber components: IsoFlex polymers are
resistant to oils, fuels, water, hydraulic fluids and
climatic conditions.
Patented co-polymer thrust ring. Improved stability with 360 degrees of control of
longitudinal and latitudinal thrusts.
Tailored installation using proprietary software analysis. The core selection process and vibration analysis
provide the best vibration profile for each
installation.
IsoFlex MAXImount System allows the mounts to be Lower long-term cost of ownership.
rebuilt by replacing cores if and when needed.
Manufactured from high quality materials: Durability and reduced corrosion and rust.
Polyurethane, stainless steel and high tensile steels.
MAXImounts 3
INSTALL
ISOFLEX
MAXImounts
IF YOU
WANT:
USE ISOFLEX • To minimise engine, drive line and machinery
vibration.
TO ISOLATE
significantly higher stability through a 360 degree
range of motion.
• Superior mounts for high performance engine and
MAXImounts
4
HOW THE SYSTEM WORKS
CO-POLYMER TOP CORE
• Dual-core co-polymer
system maximises vibration
isolation and significantly
ADJUSTING STUD ASSEMBLY minimises noise.
MOUNT BASE
• Rugged base design is tested The thrust ring handles thrust and
to at least 6G and its fail-safe side loading through 360 degrees
design can withstand inversion. of motion.
SNUBBER
• In extreme conditions,
it acts as a shock absorber.
ENGINE RAIL
MAXImounts 5
SELECTING THE PROPER
MOUNT AND CORE
Use the chart below to help select
Each MAXImount is modular. This allows you to
the proper mount and core
order one of five different top cores, each with a
different durometer. Each unique top core produces Equipment to be mounted
Describe the equipment to be mounted. An example for
a specific vibration isolation characteristic. The shape
STEP 1
a marine application would be the engine model number
and durometer of each top core maximise vibration and horse power rating, along with the transmission model
isolation and load-carrying capability. number and gear reduction ratio.
Determine the bolt centers and stud size needed and any
height restrictions. Then use the dimensions to select the
right mount base.
Data Sheets
STEP 5
Vibration profile
STEP 6
MAXImounts
6
Mount Data Sheets
IsoFlex has prepared a Data Sheet for each mount produced. A sample graph for the IM75-20S mount is displayed
below. There are 5 possible top cores from which to choose. The resiliency of each top core under load is displayed
as a line on the chart using a corresponding colour (yellow top core = yellow line).
Once the engine assembly weight has been calculated and the number of mounts is known, the load per mount is
determined by dividing the total assembly weight by the number of mounts. A 2,000 lb or 1000 kg engine with four
mounts puts 500 lb/250 kg of load on each mount.
Optimum mount performance ranges between 1.0 and 4.0mm (0.04" to 0.16") static deflection depending on the
vibration source (i.e. number of cylinders). It would be expected that a 6 cylinder engine be optimised at a static
deflection of 2.5mm approx (0.10").
Load Direction
MAXImounts 7
VIBRATION
ISOLATION
ANALYSIS
IsoFlex will perform an analysis of the engine set-up or When this information is entered into the IsoFlex
equipment to be mounted and tailor the core to isolate Software analysis program, the graph below is generated.
the maximum levels of vibration. This way, you will know The graph shows how each engine and transmission
how the mount will perform before installation. package reacts to certain excitations, including the
In the example below, the customer provided the shaft RPM, prop blade passing firing order and natural
following information: frequencies. Each mount core will alter the dynamics
• Engine model, horsepower and RPM and/or weight shown. The best core selection will produce the highest
• Transmission model number and gear reduction ratio percentage of vibration isolation at idle.
• Number of propeller blades
• Machinery configuration
(in-line, down-angle, V-drive, etc.)
• Vessel use (commercial or pleasure)
• Hull configuration, i.e. planing, displacement or multihull
MAXImounts
8
S TYPE - ADJUSTING STUD
ENGINE AND MACHINERY
Single Core Mounts
Metric
RECOMMENDED BASE BASE BOLT BASE NO. BASE STUD MIN OVERALL WEIGHT
WORKING FOOT- CENTERS BOLT OF THICKNESS DIAMETER FREE HEIGHT
MOUNT LOAD PER PRINT C DIAMETER BOLTS t HEIGHT H
MOUNT LxW d J
kg mm mm mm mm mm mm mm kg
MDC30-16S 30-120 225 x 74 174 M10 2 17 M16 105 155 1.3
M55-12S 25-200 134 x 75 100-105 M10 2 18 M12 63 103 0.6
M55-16S 25-200 134 x 75 100-105 M10 2 18 M16 68 127 0.9
M75-16S 75-300 177 x 98 127 M12 2 20 M16 86 140 1.2
M75-20S 75-300 177 x 98 127 M12 2 20 M20 91 159 1.3
M85-16S 75-300 190 x 98 140 M12 2 20 M16 86 140 1.2
M85-20S 75-300 190 x 98 140 M12 2 20 M20 91 159 1.3
M90-20S 75-350 177 x 100 127 M12 2 20 M20 99 173 1.4
M90-24S 75-350 177 x 100 127 M12 2 20 M24 110 197 1.6
M100-20S 75-350 188 x 100 140 M12 2 20 M20 104 173 1.8
M100-24S 75-350 188 x 100 140 M12 2 20 M24 108 196 2.0
M110-20S 75-350 220 x 107 170 M12 2 20 M20 122 191 2.0
M110-24S 75-350 220 x 107 170 M12 2 20 M24 128 214 2.4
M120HD-20S 250-750 230 x 112 182 M16 2 25 M20 96 175 2.4
M120HD-24S 250-750 230 x 112 182 M16 2 25 M24 96 175 2.9
M120XHD-20S 600-1000 230 x 112 182 M16 2 25 M20 96 175 2.4
M120XHD-24S 600-1000 230 x 112 182 M16 2 25 M24 96 175 2.9
M125HD-20S 250-750 240 x 127 170 M16 2 25 M20 128 196 2.4
M125HD-24S 250-750 240 x 127 170 M16 2 25 M24 134 219 3.2
M125XHD-24S 600-1000 240 x 127 170 M16 2 25 M24 134 219 3.2
M127HD-20S 250-750 240 x 127 182 M16 2 25 M20 128 196 2.4
M127HD-24S 250-750 240 x 127 182 M16 2 25 M24 134 219 3.2
M127XHD-24S 600-1000 240 x 127 182 M16 2 25 M24 134 219 3.2
M130HD-20S 250-750 240 x 127 182 M16 2 25 M20 104 173 2.4
M130HD-24S 250-750 240 x 127 182 M16 2 25 M24 110 195 2.9
M130XHD-24S 600-1000 240 x 127 182 M16 2 25 M24 110 195 2.9
M130HDLP-
250-750 240 x 127 182 M16 2 25 M20 83 170 2.4
20S
M130HDLP-
250-750 240 x 127 182 M16 2 25 M24 89 195 2.9
24S
M130XHDLP-
600-1000 240 x 127 182 M16 2 25 M24 89 195 2.9
24S
M136HD-24S 600-1200 240 x 145 182 M16 2 25 M24 134 214 3.8
M139HD-24S 600-1200 240 x 145 182 x 65 M16 4 25 M24 123 202 3.9
9
S TYPE - ADJUSTING STUD
ENGINE AND MACHINERY
ResilIent Hardness
Element SDH-A
Yellow 50
Red 60
Black 70
Dark Blue 75
Green 80
Grey 90
Base Black
Model: M110-24S
*Specific mount performance data sheets are available at isoflex.com.au and isoflextech.com
Copyright © 2016 IsoFlex Technologies Pty Ltd. Specifications are subject to change without notice.
10
BRIDGE AND
DOUBLE STYLE MOUNTS
"Double" Mount Example "Bridge" Mount Example
C
C
W W
s d
D
Optional self-aligning
swivel adjuster
H
Optional self-aligning
H J swivel adjuster J
t t
W
L L
Metric
RECOMMENDED BASE BASE BASE NO. BASE STUD DISTANCE MIN OVER- WEIGHT
WORKING FOOT- BOLT BOLT OF THICK- DIAMETER BETWEEN FREE ALL
MOUNT LOAD PER PRINT CENTERS DIAMETER BOLTS NESS STUDS HEIGHT HEIGHT
MOUNT LxW C d t s D J H
kg mm mm mm mm mm mm mm mm kg
M90-20DS 300-700 300 x 100 270 M12 2 20 M20 120 99 173 4.0
MD100-24SB 300-700 300 x 100 250 M12 2 20 M24 n/a 111 221 4.5
MD100-24DS 300-700 300 x 100 250 M12 2 20 M24 110 109 197 4.5
MD125HD-
500-1500 367 x 127 308 M16 2 25 M24 140 134 219 6.3
24DS
MD125XHD-
1200-2000 367 x 127 308 M16 2 25 M24 140 134 219 6.4
24DS
MD125HD-
500-1500 367 x 127 308 M16 2 25 M24 n/a 157 253 6.3
24SB
MD125XHD-
1200-2000 367 x 127 308 M16 2 25 M24 n/a 157 253 6.3
24SB
MD128HD-
500-1500 367 x 127 308 x 60 M16 4 25 M24 140 134 219 6.4
24DS
MD128XHD-
1200-2000 367 x 127 308 x 60 M16 4 25 M24 140 134 219 6.5
24DS
MD128HD-
600-1000 367 x 127 308 x 60 M16 4 25 M24 n/a 157 253 6.2
24SB
MD128XHD-
1200-2000 367 x 127 308 x 60 M16 4 25 M24 n/a 157 253 6.2
24SB
MD130HD-
500-1500 520 x 127 445 M20 2 25 M24 n/a 100 220 10.1
24SB
MQ130HD-
1000-3000 650 x 127 575 M20 3 25 M24 261 100 220 15.3
24DS
11
ANS AND AST TYPE
SELF-ALIGNING ADJUSTERS
Isoflex ANS-type and AST-type adjusters are Heavy Duty Adjusters which provide for up to 4 degrees of
misalignment of engine brackets to engine bearers, and provide for a maximum 10mm (3/8") height adjustment.
12
Exploded View -
Order of Components
Nut
Spring washer
Spherical washer**
Conical washer**
Engine bracket
Optional packing
washer maximum
6mm (1/4") typical
Spherical washer
Adjusting nut
Nut
Mount assembly
with stud and Spring washer
adjuster screw
fitted Spherical washer**
Conical washer**
Engine bracket
13
B TYPE - BOLT DOWN
ENGINE MOUNTS
Metric
RECOMMENDED BASE BASE BOLT BASE NO. OF BASE STUD MIN WEIGHT
WORKING LOAD FOOTPRINT CENTERS BOLT BOLTS THICKNESS DIAMETER FREE
MOUNT PER MOUNT LxW C DIAMETER t HEIGHT
kg d J
mm mm mm mm mm mm kg
M55-16B 25-200 134 x 75 100-105 M10 2 18 M16 60 0.6
M75-16B 75-300 177 x 98 127 M12 2 20 M16 59 1.1
M85-16B 75-300 190 x 98 140 M12 2 20 M16 59 1.2
M90-20B 75-350 177 x 100 125 M12 2 20 M20 75 1.3
M130HD-20B 250-750 240 x 127 182 M16 2 25 M20 75 2.2
M130HD-24B 250-750 240 x 127 182 M16 2 25 M24 75 2.2
M136HD-24B 600-1200 240 x 145 182 M16 2 25 M24 94 3.7
M139HD-24B 600-1200 240 x 145 182 x 65 M16 4 25 M24 84 3.8
MD125XHD-DB 1200-2000 367 x 127 308 M16 2 25 M24 95 13
Resilient Hardness
Element SDH-A
Yellow 50
Red 60
Black 70
Dark Blue 75
Green 80
Grey 90
Copyright © 2016 IsoFlex Technologies Pty Ltd. Specifications are subject to change without notice.
14
TRUNNION
MOUNTS
Fully adjustable mounting system for high demand
applications:
Tugboats, Towboats, Patrol boats, Ferries, Yachts and
Super Yachts
Features and Benefits:
• Fully adjustable with easily accessible CAM adjusters
(no need for shims).
• Variable elliptical elastomer polymers allow for fine
tuning the system for thrust and engine/gearbox mass.
• Modular: Mounts can be installed in a single, double or
triple arrangement for flexibility in installation.
• Customised to handle thrust from 0 to 20 tons.
• Tailored integral brackets replace the need for other
fabricated brackets on most gearboxes.
• Superior resistance to oil, fuel, water.
Easy Height
Adjustment
System
15
SUPERSTRUCTURE &
WHEELHOUSE MOUNTS
FOR HEAVY DUTY
COMMERCIAL VESSELS
Features:
• Provide vibration and electrical isolation of superstructure and
wheelhouses from vessel hulls.
• Failsafe construction.
• Engineering polymer and 316 stainless steel components = no rot, no rust.
• Used by extreme duty pilot boats and passenger ferries alike.
• Can be tuned by changing working core to suit applications.
• Dimensions including height can be varied in some cases to suit.
• Minimum 6 G force tested in all axes including inversion applications.
Metric Imperial
SUPER L W H C d t STATIC SUPER L W H C d t STATIC
STRUCTURE mm mm mm mm mm mm WORKING STRUCTURE in in in in in in WORKING
SUPPORT LOAD SUPPORT LOAD
MODEL Kg MODEL lb
M75-16SS 177 96 100 127 2x4 20 100-300 M75-16SS 7.0 3.8 3.9 5.0 2 x 0.6 0.8 220-660
M130-20SS 240 127 125 182 2 x 16 25 300-1000 M130-20SS 9.4 5.0 4.9 7.2 2 x 0.6 1.0 660-2200
M125-20SS 240 127 166 170 2 x 16 25 300-1000 M125-20SS 9.4 5.0 6.5 6.7 2 x 0.6 1.0 660-2200
MD125-20SS 367 127 166 308 2 x 16 25 600-2000 MD125-20SS 14.4 5.0 6.5 12.1 2 x 0.6 1.0 1300-4400
MD128-20SS MD128-20SS
(4 hold down 367 127 166 308 x 60 4 x 16 25 600-2000 (4 hold down 14.4 5.0 6.5 12.1 4 x 0.6 1.0 1300-4400
bolts) bolts)
MSS-10 MSS-10
(4 hold down 200 100 110 170 X 60 4 X 13.2 20 100-700 (4 hold down 7.9 3.9 4.3 6.7 X 2.4 4 X 0.5 0.8 220-1540
bolts) bolts)
MSS-12 MSS-12
(4 hold down 190 125 110 160 X 80 4 X 13.2 20 100-700 (4 hold down 7.5 4.9 4.3 6.3 X 3.1 4 X 0.5 0.8 220-1540
bolts) bolts)
16
LIGHT MACHINERY AND
CYLINDRICAL MOUNTS
Metric
RECOMMENDED BASE BASE BOLT BASE BOLT NUMBER BASE BOLT MIN FREE WEIGHT
MOUNT WORKING LOAD FOOTPRINT CENTERS DIAMETER OF THICKNESS DIAMETER HEIGHT
MODEL PER MOUNT LXW C d BOLTS t J
kg mm mm mm mm mm mm kg
M5-6 1.0-15 70 x 40 50 6 2 6 6 18 0.05
M6-6 1.0-30 91 x 52 65 6 2 8 6 20 0.1
M6-8 1.0-30 91 x 52 65 6 2 8 8 20 0.1
M6-10 1.0-30 91 x 52 65 6 2 8 10 20 0.1
M6 = model number
6 = thread size Stainless Steel Stainless Steel
M6X20 hex bolt
B = bolt type & flat washer supplied
20dia flat washer
Stainless Steel
Mount Hardness M6 flat washers
supplied
Colour SDH-A
Yellow 50
Red 60
Black 70
Royal Blue 75
Metric
RECOMMENDED DIAMETER BOLT MIN FREE WEIGHT Mounts: CM6, CM8 & CM10
MOUNT MODEL WORKING LOAD DIAMETER HEIGHT Threaded Insert at
PER MOUNT J both ends
- M6, M8 or M10
kg mm mm mm kg
Copyright © 2016 IsoFlex Technologies Pty Ltd. Specifications are subject to change without notice.
17
GENERAL PURPOSE
MACHINERY MOUNTS
Metric
RECOMMENDED BASE BASE BOLT BASE BOLT NUMBER BASE BOLT MIN FREE WEIGHT
WORKING LOAD FOOTPRINT CENTERS DIAMETER OF THICKNESS DIAMETER HEIGHT
MOUNT PER MOUNT LXW C d BOLTS t J
MODEL
kg
mm mm mm mm mm mm kg
GPM6-6B 1.0-20 91 x 52 65 6 2 8 6 20 0.1
GPM7-12B 20-120 112 x 64 75-89 8 2 12 12 31 0.2
GPM7FS-12B 20-120 112 x 64 75-89 10 2 12 12 31 0.2
GPM10-12B 40-250 140 x 75 98-110 10 2 12 12 40 0.35
GPM10-16B 40-250 140 x 75 98-110 12 2 12 16 40 0.35
GPM10-1/2"B 40-250 140 x 75 98-110 12 2 12 1/2" 40 0.35
GPM10FS-16B 50-300 140 x 75 98-110 12 2 12 16 40 0.35
GPM10FS-1/2"B 50-300 140 x 75 98-110 12 2 12 1/2" 40 0.35
GPM10FS-16B 75-300 177 x 98 127 12 2 15 16 60 0.6
GPM15FS-20B 75-300 177 x 98 127 12 2 15 20 60 0.6
*Specific mount performance data sheets are available at isoflex.com.au and isoflextech.com
Copyright © 2016 IsoFlex Technologies Pty Ltd. Specifications are subject to change without notice.
18
DUAL COMPRESSION
MOUNTS
Working Load
Part No. A B C D E F
(kg)
MT58421012 58 40 M12 12 10 12 20-100
MT66380816 66 38 M16 16 8 15 40-250
MT70301920 70 30 M20 18.5 19 9.5 40-350
MT70301916 70 30 M16 18.5 19 9.5 40-350
MT75351214-F 75 38 M14 28 12 28 80-400
MT75351214-T* 75 38 M14 38 12 18 50-300
MT75401616 75 40 M16 28 16 28 80-400
MT90401616 90 40 16 16 10 16 150-700
MT 125582034 125 58 3/4" 40 20 40 250-1000
MT 125642034 125 64 3/4" 40 20 40 250-1000
19
ISOFLEX MOUNT
CROSS REFERENCE ENGINE MOUNT
APPLICATION GUIDE
20
MANUFACTURER/ ISOFLEX MANUFACTURER/ ISOFLEX
HARDNESS COMMENTS HARDNESS COMMENTS
MODEL MOUNT MODEL MOUNT
N67 150 (N67 MNA M15) M75-20 70 Stern drive Petrol
M55 - 16 70
N67 220 (N67 MNS M22) M75-20 70 4.3 Litre 160
21
ISOFLEX MOUNT
CROSS REFERENCE ENGINE MOUNT
APPLICATION GUIDE
22
MANUFACTURER/ ISOFLEX NO. OF MANUFACTURER/ ISOFLEX
HARDNESS HARDNESS COMMENTS
MODEL MOUNT MOUNTS MODEL MOUNT
D3-130 M85 - 16 50 4 3YM30 MDC30-16 5050 or M55-16-50
D3-130SX M85 - 16 50 2 3JH2BE MDC30-16 5060 or M55-16-50
D3-160 M85 - 16 50 4 3JH2TBE MDC30-16 5060 or M55-16-60
D3-160DP M85 - 16 50 2 3JH2TE MDC30-16 5060 or M55-16-60
D3-190 M85 - 16 50 4 3JH4E MDC30-16 5060 or M55-16 60
D3-190DP M85 - 16 50 2 4JH2BE MDC30-16 6060 or M55-16-60
D4-180 M85 - 16 70 4 4JH2TBE MDC30-16 6060 or M55-16-60
D4-225 M85 - 16 70 4 4JH2HTE MDC30-16 6060 or M55-16-60
D4-225DP M85 - 16 70 2 4JH2DTE MDC30-16 6060 or M55-16-60
D4-260 M85 - 16 70 4 4JH2UTBE MDC30-16 6060 or M55-16-60
D4-260DP M85 - 16 70 2 4JH2UTE MDC30-16 6060 or M55-16-60
D4-300 M85 - 16 70 4 4JH3 - THE MDC30-16 6060 or M55-16-60
D4-300DPR M85 - 16 70 2 4JH4E MDC30-16 6060 or M55-16-60
D6-280 M130HD - 20 70 4 4LH-TE MDC40-16 7060 or M85-16-50
D6-280DP M130HD - 20 70 2 4LH-HTE MDC40-16 7060 or M85-16-50
D6-310 M130HD - 20 60 4 4LH-DTE MDC40-16 7070 or M85-16-50
D6-310DPR M130HD - 20 70 2 4LH-STE MDC40-16 7070 or M85-16-50
D6-330 M130HD - 20 60 4 4LHA-HTP M90-20S 60
D6-330DP M130HD - 20 70 2 4LHA-DTP M90-20S 60
D6-370 M130HD - 20 60 4 4LHA-STP M90-20S 60
D6-370DP M130HD - 20 70 2 6LP-DTE M90-24 60
D6-435 M130HD - 20 70 4 6LP-STE M90-24 70
D9-500 M130HD - 20 75 4 6LPA - DTZP M90-24 60
D9-575 M130HD - 20 75 4 6LPA-DTP M90-24 70
D11-670 M127HD - 20 75 4 6LPA-STP M90-24 70
D12-675 M127HD - 20 80 4 6LYA M110 - 24 70
D12-715 M127HD - 20 80 4 6LYA-STP M110 - 24 70
D12-800 M127HD - 20 80 4 6LY2A-STP M110 - 24 70
D13-800 M127HD - 20 80 4 6LYM-UTE M110 - 24 70
YANMAR COMMENTS 6LY-UTE M110 - 24 70
YSE8 M55 - 12 50 6LY3A-STP M110 - 24 70
YSE12 M55 - 12 50 6CXM GTE M130HD - 24 70
YSM8 M55 - 12 50 6CX ETE M130HD - 24 75
YSM12 M55 - 12 50 6SY-STP M130HD-24 80
2QM15 M55 - 12 50 6HYM-WGT MD90-20S 70
2QM20 M55 - 12 50 6AY-ETE M138HD-24 70 or M135HD-24
3QM30 M55 - 12 60 8SY-STP M130XHD-24 70
2GM20 MDC30-16 5050 or M55-16-50
Many more engines are available on the full Engine Mount application
2GM20F MDC30-16 5050 or M55-16-50 guide. Visit isoflex.com.au or isoflextech.com or contact IsoFlex
2YM15 MDC30-16 5050 or M55-16-50 for details. Check mount dimensions as dimensions can vary due to
3GM30 MDC30-16 5050 or M55-16-50 variation in original fitting.
3GM30F MDC30-16 5050 or M55-16-50 NOTE: COMMERCIAL APPLICATIONS NEED CLOSE ATTENTION DUE
3YM20 MDC30-16 5050 or M55-16-50 TO HIGH DEMAND AND THRUST. PLEASE CONFIRM WITH ISOFLEX.
23
IsoFlex supplies to the following countries worldwide:
Overall Height
Authorised Distributor:
12
28
17
Gold Coast Marine Precinct
Coomera, Queensland
Australia 4209
Phone 011 61 7 5556 0924
127
25
18
MAXImounts