Professional Documents
Culture Documents
B.cable Glands TCF. 15-7-23
B.cable Glands TCF. 15-7-23
INTRODUCTION LETTER: 1
SPEEDWELL TECHNOLOGIES PVT LTD
About us --
Since 1982, Speedwell Industries and now known as Speedwell Technologies Pvt. Ltd.,
has earned the reputation as a Manufacturer of quality electrical components of Bronze,
Copper, Brass, Stainless Steel and Aluminum especially for Grounding, Lightning Protection
and Power Distribution system.
Our three production plants produce over 1200 product variants, ranging in various sizes of
components that weigh few grams to a single casting weighing over 10 kilograms. We are
able to produce world's best non-ferrous casting components with prompt verification of new
design and repeated product performance.
Speedwell has continued to expand its product range, Technology, know how,
expertise and its presence by innovation, dedication and not least by word of experience -
now it is well known as a consistent manufacturer of Quality Products from India.
System Certificates: ISO 9001 :2008/ ISO 14001: 2004
OHSAS 18001: 2007
REFERENCE STANDARDS
A. Cable Glands:
1. IEC/BS EN 62444/IEC 60529/BS 6121
B. Earthing Grounding and Lightning Protection
IEC 62561-1:2023/IEC 62561-2:2018/IEC 62561-4:2017/ IEC 62561-5:2017
Speedwell has continued to expand its product range, Technology, know how, expertise and its
presence by innovation, dedication and not least by word of experience - now it is well known as a consistent
manufacturer of Quality Products from India.Product Certification/Compliance: UL ,CSA ,EEE,BSEN,IEC
BENIFITS OF CHOOSING SPEEDWELL:
The benefits ofcoming tospeedwell for earthing, lightning protectionsystem are:
With our manufacturing experiences of many decades we are able to utilise our knowledge of the
products available to design, produce and even upgrade and invent new designs and components
in the state of the art facilities.We are the only in the Asian subcontinent who can manufacture the
complete range of earthing, lightning and electrical products.
Our expert team suggests an optimum system requirement - one that doesn't use excess materiel than
necessary,resulting in saving your money.
We provide designed components that comply
PRODUCTS :
Grounding System
Lightning Protection System
Cable Conductors and Fixtures
Cable Glands and Accessories
Copper, Aluminum and Bi-metallic cable Lugs and Connectors
Overhead transmission line hardware and fittings
Distribution and Panel Board Accessories
Cable Clamping andIdentification System
SPEEDWELL –INTRODUCTION
About us --
Since 1982, Speedwell Industries and now known as Speedwell Technologies Pvt. Ltd.,
has earned the reputation as a Manufacturer of quality electrical components of Bronze,
Copper, Brass, Stainless Steel and Aluminum especially for Grounding, Lightning Protection
and Power Distribution system.
Our three production plants produce over 1200 product variants, ranging in various sizes of
components that weigh few grams to a single casting weighing over 10 kilograms. We are
able to produce world's best non-ferrous casting components with prompt verification of new
design and repeated product performance.
Speedwell has continued to expand its product range, Technology, know how,
expertise and its presence by innovation, dedication and not least by word of experience -
now it is well known as a consistent manufacturer of Quality Products from India.
Our World Class Factories
SPEEDWELL Product Approvals
UL CERTIFICATE:Testing as per BS 6121-1:2005;EN 50262:1999+A1:2001;+A2:2004 ;BS EN
62444:2013 for
Cable Retention/Electrical Current Test/Resistance to impact test/Ingress Protection
Excess Tightening Torque
SGS – MATERIAL TEST CERTIFICATE (Confirming Brass CuZn39Pb3)
SGS – RoHS CERTIFICATE
Brass complying RoHSDirective 2011/65/EU Annex II
SGS-RoHS CERTIFICATE-Nylon Plastic Ring- complying RoHSDirective 2011/65/EU Annex II
SGS-RoHS CERTIFICATE-Neoprene Rubber Washer-complying RoHSDirective 2011/65/EU
Annex II
Speedwell Products Approval Matrix
Industrial Cable Glands ( BW , CW , E1W & A2 CABLE GLANDS )Approvals
Raw Material
Speedwell Industrial Cable Complies
Chemical
Gland ,Brass IS 316 /
Composition
CuZn39Pb3.
Test
RoHS as per Speedwell Industrial Cable
Directive Complies
Gland ,Brass CuZn39Pb3
2011/65/EU
ANNEX II Cable Gland Plastic Ring , Complies
REQUIREMENT Nylon 66
S Cable Gland Sealing Washer ,
Complies
Neoprene
TEST REPORTS BY NABL ACCREDITED LABORATORY
RAW MATERIAL – BRASS COMPOSITION TO CUZN39PB3
TEST REPORTS BY NABL ACCREDITED LABORATORY
ROHS COMPLIANCE FOR BRASS CABLE GLAND
TEST REPORTS BY NABL ACCREDITED LABORATORY
ROHS COMPLIANCE FOR NEOPRENE RUBBER WASHER - CABLE GLAND
TEST REPORTS BY NABL ACCREDITED LABORATORY
ROHS COMPLIANCE FORCABLE GLAND NYLON PLASTIC RING
DRAWINGS, TECHNICAL DATA, AND CABLE GLAND SELECTION CHARTS
BW CABLE GLAND-SPEEDWELL
Gland Dimensions
Overall
Under Armour ISO Entry Approx Hexagon Size
Cable Thread
Diameter 'A' Length
Diameter
MM Thread Ffrom Across Across
CABLE 'B' MM
Dia Len Shoulder Flat
GLAND CAT.# Corner
gth
SIZE
Min. Max.
Cable Cable
Bedding Bedding Min Max D mm E F mm G mm H mm
Diameter mm
Diameter
E1W16L BCGE116LS 6.30 8.60 8.00 13.5 M16 15.00 40.00 22.00 24.00
E1W20S BCGE120SS 8.00 10.50 8.30 15.0 M20 15.00 45.00 22.00 24.00
E1W20L BCGE120LS 11.20 14.00 14.50 19.5 M20 15.00 45.00 27.00 30.00
E1W25S BCGE125SS 13.20 18.50 18.00 21.5 M25 15.00 50.00 31.00 35.00
E1W25L BCGE125LS 14.50 20.30 18.80 25.5 M25 15.00 50.00 35.00 39.00
E1W32S BCGE132SS 26.30 22.80 23.00 30.0 M16 15.00 55.00 44.00 48.00
E1W32L BCGE132LS 19.00 26.00 25.00 31.4 M32 15.00 55.00 44.00 48.00
E1W40S BCGE140SS 25.00 29.00 31.30 40.1 M40 15.00 60.00 51.50 57.50
E1W40L BCGE140LS 26.40 32.50 33.40 41.9 M40 15.00 60.00 51.50 57.50
E1W50S BCGE150SS 26.00 39.60 37.80 47.4 M50 15.00 65.00 59.00 65.00
E1W50L BCGE150LS 36.80 43.40 39.00 49.3 M50 15.00 65.00 64.50 72.00
E1W63S BCGE163SS 45.50 53.00 49.30 58.0 M63 18.00 70.00 70.00 77.00
E1W63L BCGE163LS 49.50 55.00 53.00 65.0 M63 18.00 70.00 78.00 87.50
E1W75S BCGE175SS 56.10 61.00 61.50 68.6 M75 20.00 76.00 84.00 92.50
0
E1W75L BCGE175LS 55.00 66.50 66.40 78.5 M75 20.00 79.00 95.00 108.0
0 0
E1W90L BCGE190LS 66.50 73.50 72.00 88.0 M90 20.00 96.00 105.0 122.0
0 0 0
E1W CABLE GLAND SELECTION CHART
A1A2 CABLE GLANDUNARMOURED
A1A2 CABLE GLAND – TECHNICAL DATA SHEET
A1A2 INDUSTRIAL CABLE GLANDS, FORUNARMOURED CABLES as per BS 6121-
1:2005;BS 6121- 5:2005;EN 50162 1998 +A1:2001 +A2:2004;
IEC 62444:2010 & BS EN 62444:2013
Note: BS EN 62444:2013 supersedes EN 50162 1998 +A1:2001;+A2:2005.
ISO Entry Hexagon
Overall Overall Thread Size
Cable Cable Approximat
CABLE DiaMin DiaMax Acros Acros
GLAND Dia Length e Length
sFlat s
PART form
Corner
CODE Shoulder
A A D mm E mm F mm G mm H mm
GLAND GLAND
E1W CABLE GLAND-SPEEDWELL
3.0 Installing the Cable Glands
Installation should only be carried out by a competent person, skilled in the installation of cable glands. Care
should be taken to avoid damage to entry threads when handling and installing cableglands. Cable Glands
should not be installed whilst circuits are live. Similarly, following energising ofthe electrical circuits, cable
glands should not be dismantled or opened until the circuit has beensafely de-energised.
Cable Gland components are not interchangeable with those of any other cable gland manufacturer.It is
important to note that components from one manufacturer's product cannot beused in that of another, and that
modification of a cable gland product will invalidate the Industrial/hazardous area certification.
The cable gland is not a user serviceable product and spare parts are not permitted to be suppliedunder the
certification.
Cable Gland seals are included within the cable gland when despatched from the factory. There should be no
circumstances where seals need to be removed from the cable gland. Care should betaken to avoid exposure
of cable gland seals to dirt, hostile substances, e.g. solvents, and other foreign bodies.
Installation Tools
Always use the correct tools, as incorrect tools will inevitably lead to mistakes, potential damage
and/or personal injury. Gloves are recommended when handling and terminating cables and cable
glands. Safety and personal protection should be given priority over all other considerations.
For each cable gland size are available, these are recommended for correctly installing the product.
Adjustable spanners and wrenches are not recommended as there is a possibility of slippage thatcan
lead to accidental injury or damage to surface finish.
Any sharp tools, instruments or knives used to cut or strip the cable sheath should be equipped with
a safety blade or other safety feature consistent with the tool design and intended use.
Braid snips should be used to remove unwanted or excess cable braid. Ensure that braid snips are in
good condition and effectively sharp enough to enable a first time clean cut of the cable braid without
snagging.A Cable Striper, or other similar tool, should be used to cut armour wires.
When using armoured cables (or conduit), both in Indoor and Outdoor situations, any metallic
partsof the cable (or conduit) must be earthed, and this also applies to the lead covering used in
lead sheathed cables. Wherever armoured cables are used it is normal practice to terminate the
metallic armour, and / or lead cover (lead sheath) in the body of a metallic cable gland.
The cable armour is primarily for mechanical protection, and as already stated, this metallic armour
must be effectively earthed. The cable must be tested to determine its short circuit earth fault current
rating, with the earth fault current being carried by the cable armour wires. Users should refer to the
cable manufacturers design data for the short circuit fault current carrying capacity of the armour
wires of each cable.
E1W CABLE GLAND SELECTION CHART
Installation Torque : Torque Value
Cable Diameter mm TorqueN-m
4 to 8 0,10
8 to 11 0 ,15
11 to 16 0,35
16 to 23 0,60
23 to 31 0,80
31 to 43 0,90
43 to 55 1,00
55 1,20
6.0 Entry Thread Length:Mentioned in Technical Details.
6.2 IP Code : IP66 for CW, E1W, & A2 Glands. IP3X for BW Glands.
DOC NO : SPWL/PAD/2304
Issue : 01
Revision : 00
PART DESCRIPTION : CABLE GLANDS
PRODUCT CATEGORIES : ARMOURED CABLE GLANDS
CUSTOMER :
SPEEDWELL Address :
Plot No. G/1343, Road No. 1-F, Lodhika G.I.D.C. Metoda (Rajkot) – 360021Gujarat -INDIA.
Technical Data:
Product Application:
o SPEEDWELL Cable Glands for indoor/outdoor application are
used with all types of Armoured cable/Unarmoured cables,
providing mechanical cable retention and an environmental
seal on the cable outer sheath.
Speedwell Cable Gland Selection Chart CW115 ( M115 ) Metallic
Armoured Cable Glands COMPRESSION TYPE CW METAL CABLE GLANDS(BRASS) FOR
ARMOURED CABLE as per BS 6121-1:2005 ; BS EN62444:2013/IEC 62444:2010
QATAR PETROLEUM
7 Conductors
www.speedwellindia.com
2.1 Introduction: - Cable glands are mechanical cable entry devices. They are
used throughout a number of industries with cable and wiring used in electrical
instrumentation and automation systems. Cable glands are mechanical fittings that
form part of the electrical installation material. The purpose of a cable gland is to seal
the cable and retain it in the electrical equipment that it is attached to. It should
maintain the ingress protection rating of the enclosures, keeping out dust and moisture
but it should also prevent the cable from being pulled out of the equipment and from
being twisted whilst connected to equipment.
A new IEC standard for “Cable Glands for Electrical Installations”, IEC 62444, was
recently published recently and in time this adopted in several countries across the
world. This new standard could have a profound impact on users and manufacturers,
especially those who discover for the first time that the products they have previously
used have not been tested to any current standards. IEC 62444 is similar to EN 50262
in that it is also a performance based standard, allowing manufacturers to produce
cable glands of varying degrees of robustness some of which may be more suited to
light industrial applications such as factory automation, whilst others may be more
applicable to medium and heavy duty industrial electrical installations, such as power
generation and distribution.
2.3 Cable Gland Basic Code for Unarmoured and Armoured Cables:-
Code Definition
Braid
X
Definition
Code
Cable Gland for unarmoured cable with outer seal
A2
Bore Size 8.7 11.7 14.0 20.0 26.3 32.2 38.2 44.1 50.1 56.0 62.0 68.0
Permitted +0.3 +0.3 +0.3 +0.3 +0.5 +0.5 +0.5 +0.5 +0.5 +0.5 +0.5 +0.5
Tolerance mm mm mm mm mm mm mm mm mm mm mm mm
Maximum
9.0 12.0 14.3 20.3 26.8 32.7 38.7 44.6 50.6 56.5 62.5 68.5
Bore Size
www.speedwellindia.com
SPEEDWELL UL APPROVAL
www.speedwellindia.com
www.speedwellindia.com
www.speedwellindia.com
www.speedwellindia.com
www.speedwellindia.com
www.speedwellindia.com
www.speedwellindia.com
www.speedwellindia.com
www.speedwellindia.com
www.speedwellindia.com
www.speedwellindia.com
www.speedwellindia.com