Professional Documents
Culture Documents
I-Kon II Electronic Blasting System TDS 2015-05-12 en Russia
I-Kon II Electronic Blasting System TDS 2015-05-12 en Russia
I-Kon II Electronic Blasting System TDS 2015-05-12 en Russia
2015-05-12
Page 1 of 3
Product Classification
Technical Properties
Correct Shipping Name: Detonators, electric
Product i-kon™ II Detonator UN: 0030 0456
Maximum delay time (ms) 30.000 Classification: 1.1B 1.4S
Programmability (ms) ±1
Precision as coefficient of variation (%) 0.005 All regulations pertaining to the use of such explosives apply.
Hydrostatic pressure resistance 10 / 7
(bar/day) Product Approvals
Shell length x diameter (mm) 89 x 7.6 Authorised Name EC Type Certificate
Shell material copper or alloy i-kon™ II Detonator ENB/D/188/15
Base charge: PETN or Pentolite (mg) 780
i-kon™ II Detonator RX ENB/D/188/15
Initiating charge: Lead Azide (mg) 120
Output strength REF. DET. #3
Packaging Details
Lead wire: steel (mm) Standard 0.6 i-kon™ II Detonator
RX 0.6
Insulation diameter (mm) Standard 1.35 Lead Length 1.1B 1.4S
RX 1.8 (m) Units per Case Units per Case
Wire tensile strength (N) Standard 200 6 80 40
RX 250
10 60 35
Insulation material Standard PP
15 66 32
RX TPU
20 66 32
Wire color Standard yellow
RX red 30 36 32
Connector 40 30 16
Material PE
60 20 16
Colour blue
Terminals brass Format: 6 & 10 m figure 8; 15 – 60 m on spool
i-kon™ II Detonator RX
2015-05-12
Page 2 of 3
Not to be used in mines with hazards of coal dust or fire Orica CIS CJSC
damp explosions. 32a, Khoroshevskoye shosse,
entrance 1, office 226
Training 123 007 Moscow
This Technical Data Sheet is for information only. The Russia
i-kon™ II System should only be used by personnel who Phone: +7 495 64 111 64
have been properly trained to use this system. Fax: +7 495 64 111 65
Email: info-russia@orica.com
2015-05-12
Page 3 of 3