Professional Documents
Culture Documents
3D Solution
3D Solution
3D Solution
3D Lens Lineups
A pioneer in the development of Digital Drive Units for its portable lenses, Canon’s control systems for 3D lens-camera-
pairs capitalizes on the precision of these Digital Drive Units, allowing for one zoom controller and one focus controller to
simultaneously operate both lenses. The Company’s new ergonomic Digital Drive Unit incorporates Canon-developed, ultra-
compact rotary encoders capable of 0.1um position detection which produces 16-bit resolution of the positions of zoom, iris, and
focus controls. Together with the 3D Bridge Cable and the 3D Lens Adjustment Software as described on the next page, the lens
will provide even higher interoperability and precision in synchronization of zoom, focus and iris positions of the lens pairs.
3D Bridge Cable Most of the Canon’s HDTV Zoom Lenses are equipped with 16-bit resolution
Rotary Encoder Devices, which provide precise synchronous lens control by simply
To Left Lens
connecting the two lenses with a 20pin-20pin single cable. This 3D Bridge Cable will
allow simultaneous control of a pair of lenses from one zoom and focus controllers.
(See the system configuration on the back cover.)
To Right Lens
3D Lens Controllers
A special attraction of Canon’s synchronous lens control system is that the system doesn’t require special controllers. If the lens is
installed with the 3D Lens Adjustment Software, all the servo controllers for digital servo lenses as shown below will be compatible
with Canon’s synchronous lens control system, which should save additional costs when implementing 3D production systems.
20pin
3D Bridge Cable
t'1%% t'%+%
t'%+12
20pin
#%$DPOWFSTJPODBCMFJTOFDFTTBSZUPDPOOFDUCFUXFFO;%+%PS'%+% QJO
BOE%JHJUBM%SJWF-FOT QJO
#%$DPOWFSTJPODBCMFJTOFDFTTBSZUPDPOOFDUCFUXFFO;%+1PS'%+1 QJO
BOE%JHJUBM%SJWF-FOT QJO
3D Divider Cable ×2
t'%+1
QJO
1MFBTFBTLB$BOPOPóDFGPSUIFEFUBJMT