Professional Documents
Culture Documents
Boom Truck: Maximum Lifting Capacity: 18ton
Boom Truck: Maximum Lifting Capacity: 18ton
Boom Truck: Maximum Lifting Capacity: 18ton
HYDRAULIC Introducing the TADANO TM-20110, the TADANO Straight Truck Mount is available in behind
Hydraulic motor For winch and swing the cab as well as rear mounts. TADANO has over 50 years of experience in manufacturing high
Control valves Multiple control valves with integral safety valve quality cranes featuring innovative ideas and leading edge technology. The TM-20110 answers
TM-20110
Hydraulic pump 3-section gear pump a real need for a true Boom Truck for all over the world. This is the crane that everyone has been
Winch system : (20.6Mpa)
looking for and we have delivered a crane packed with great features and superior performance.
121L/min@ 2,430rpm pump
With its long reach and high lift, we believe the TM-20110 is one of our most desirable cranes.
99.6L/min@ 2,000rpm pump
TADANO builds a vast range of cranes from 0.5 ton to 600 tons. No matter what your reach or lift
Boom and outriggers system : (21.1 MPa)
requirements are, TADANO can provide you with a great solution. Put one to work for you now. MAXIMUM LIFTING CAPACITY : 18TON
95 L/min@ 2,430rpm pump
Call today or visit our web site for more information.
78.2L/min@ 2,000rpm pump
Swing system : (12.1 MPa)
Features:
25 L/min@ 2,430rpm pump
20.6L/min@ 2,000rpm pump Exceptional Reach without a Jib: 33.5 m. Full Power Boom
Reserve tank 295 L capacity Self-Aligning Pentagonal Shaped Boom: reducing maintenance cost
*PTO/Mounting note included Light Weight: increases payload
ELECTRICAL SYSTEM
Out & Down Mainframe Outriggers: complete level ability
Power supply DC12V with a converter (Step down converter from 24V)
SAFETY DEVICES Multiple Outrigger Span: easy to set up in various job sites
Pendant type over-winding cut out Faster Function Speeds: increase productivity
Hook safety latch Superior Winch Performance: up to 85 m/min increase productivity
Level gauge
Hydraulic safety valves, check valves and holding valves
Shear Plate Mounting: more secure “no creep mount”
Over load shutoff with load indicator (TADANO’s exlusive “AMA” system) Large Hydraulic Reservoir: superior cooling capabilities
Load / Boom angle indication Operator Friendly: dual control stations with exceptional job site viewing
Audible warning Complete Load Monitoring: TADANO’s exclusive “AMA” system
External warning lamps
BOOM REST
Removable
TORSION BOX
<CAB BACK MOUNTED>
The weight of 22ft (6.7m) standard torsion box is approx. 1,800kg.
<REAR MOUNTED>
The weight of 14ft (3.6m) torsion box is approx. 1,400kg.
CRANE WEIGHT
Approx. 6,900 kg (bare), approx. 8,400kg (include all items; crane, tank, oil, rear stabilizer, boom rest, etc.)
OPTION
Hook block
Swivel hook with safety latch
1) 3,200kg capacity ( for single line use, 60kg)
Highest Quality Boom Trucks on the Planet
2) 6,000kg capacity ( for two part lines use, 100kg)
3) 12,000kg capacity ( for four part lines line use, 160kg)
4) 18,000kg capacity ( for six part lines use, 220.5kg)
*Note
A crane does not come with a hook block as a standard item
and shall be ordered out from the above.
The above lifting heights and boom angles are based on a straight (unladen)boom,
SWING and allowance should be made for boom deflection obtained under laden condition.
No. of part lines
Max. of load
1
3,200kg
2
6,000kg
4
12,000kg
6
18,000kg
Hydraulic motor driven, Planetary gear speed reduction <REAR MOUNTED> (mm) Gross Axle Weight Rating(GAWR), front approx. 6,350kg
Continuous 360˚ full circle swing (Standard) Gross Axle Weight Rating(GAWR), rear approx. 15,400kg
Gross Vehicle Weight Rating approx. 21,750kg
Swing speed 360˚ / 37s @ 2,430rpm pump or 45s @ 2,000rpm pump RATED LIFTING CAPACITY (IN KILOGRAMS) SAE85% / ISO4305
5,590 to 6,350mm
Wheelbase(WB)
Non-Continuous 375˚ rotation on ball bearing slew ring (Option) 8.3m Boom 14m Boom 18.9m Boom 23.8m Boom 28.6m Boom 33.5m Boom Cab to axle(CA) 3,810 to 4,570mm
Swing speed 375˚ / 38s @ 2,430rpm pump or 47s @ 2,000rpm pump Stability weight, front * 3,600kg Min.
Load Load Stability weight, rear * 3,600kg Min.
OUTRIGGERS radius radius
Frame Section Module(SM) under crane, 328 cm3 Min. per rail
<CAB BACK MOUNTED> (m) Loaded Outriggers Loaded Outriggers Loaded Outriggers Loaded Outriggers Loaded Outriggers Loaded Outriggers (m)
110,000PSI steel
Boom Extended Boom Extended Boom Extended Boom Extended Boom Extended Boom Extended
Outriggers (Out & Down type) Angle Max. Mid. Min. Angle Max. Mid. Min. Angle Max. Mid. Angle Max. Mid. Angle Max. Angle Max. Frame Section Module(SM) 328 cm3 Min. per rail
Hydraulically extended sliders and hydraulically extended jacks, integral with crane frame 1.5 79˚ 18,000 12,700 9,000 1.5 over rear outriggers, 110,000PSI steel
73˚ 6,500 PTO torque approx. 390 N-m Min.
Extend width Min. 2,180mm 2.5
3.0 68˚
11,300 11,300
9,900 9,900 4,700 78˚ 7,200 7,200 4,300
2.5
3.0 PTO revolution approx. 550 to 2,400 rpm
5,590 to 6,350
Mid. 4,000mm 3.5 64˚ 8,800 8,800 3,500 76˚ 7,200 7,200 3,400 3.5 *3,600kg MIN *3,600kg MIN Width for crane mounting approx. 1,400mm Min.
Max.5,700mm 4.0 60˚ 7,900 7,800 2,750 73˚ 7,200 7,200 2,700 4.0 Frame width(outside) approx. 915mm Max.
5.0 51˚ 6,400 5,400 1,800 69˚ 6,200 5,400 1,850 75˚ 5,700 5,200 5.0 Frame height(ground to frame top) approx. 1,060mm Max.
Rear stabilizers (Out & Down type) 6.0 41˚ 5,200 3,750 1,200 65˚ 5,100 3,800 1,300 73˚ 4,700 3,600 77˚ 4,300 3,800 6.0 This mount requires front outriggers, torsion resisting box and
additional counterweight in the underside of the bed for full * Estimated axle scale weights prior to installation of crane, stabilisers and torsion box for 78%
Hydraulically extended sliders and hydraulically extended jacks, integral with chassis frame 8.0 55˚
44˚
3,700 2,200 650
300
66˚
59˚
3,300 2,250
1,500
72˚
67˚
3,200 2,250
2,400 1,500
77˚
72˚
2,400
75˚
8.0
capacity 360˚ around the truck. stabilitiy. Include counterweight.
10.0 2,600 1,450 2,500 2,300 1,700 10.0
Extend width Min. 2,250mm 12.0 29˚ 1,800 900 51˚ 2,000 1,000 61˚ 2,000 1,050 67˚ 1,900 71˚ 1,500 12.0
You must select a torsion box according to the length of the flatbed and
have it installed. The weight of standard torsion box for 14' flat bed:
Max.3,500mm 14.0 44˚ 1,500 650 56˚ 1,600 700 64˚ 1,600 69˚ 1,300 14.0
approx. 1,406kg.
16.0 32˚ 1,100 400 50˚ 1,250 450 58˚ 1,300 65˚ 1,100 16.0
Single front stabilizer 18.0 10˚ 750 41˚ 950 250 52˚ 1,000 60˚ 900 18.0
The complete unit must be istalled in accordance with factory
requirements and a test performed to determine actual stability and
Hydraulic extended jack in front of bumper for 360˚ lifting operations 20.0 35˚ 700 48˚ 750 56˚ 750 20.0 counterweight
22.0 21˚ 500 42˚ 550 52˚ 600 22.0 requirements for variety of trucks.
24.0 35˚ 400 47˚ 400 24.0 REAR MOUNTED configulation can not convert to CAB BACK
<REAR MOUNTED> 26.0 42˚ 250 26.0 MOUNTED configuration.
2,900 2,100 550 1,000 650 250
Rear outriggers (Out & Down type) 0˚
(7.88m)
0˚
(13.57m)
0˚
(18.44m)
Hydraulically extended sliders and hydraulically extended jacks, integral with crane frame Notice : The chart is only for reference and should not be used for operation.
Maintain a clearances at least 3m between any part of the crane, load line or load and any electrical line carrying up to 50,000 volts.
Extend width Min. 2,180mm 0.3m additional clearance is required for every additional 30,000 volts or less.
Mid. 4,000mm
Max.5,700mm TM-20110 (18 ton) crane dimension specifications
(mm)
Front outriggers (Out & Down type) Min 8,330 Max33,530 2,428
Hydraulically extended sliders and hydraulically extended jacks, integral with chassis frame 450
Extend width Min. 2,180mm < CAB BACK MOUNTED > < REAR MOUNTED >
Mid. 4,000mm Extension Mark Extension Mark for Rear Mout
2,809
Outriggers Max. Outriggers Min.
Max.5,700mm Front Outriggers
Yellow: Extended Mid.
Rear Stabilizers Front Outriggers Rear Outriggers Outriggers Max. Outriggers Min.
White: Extended Max. White: Extended Max.
Yellow: Extended Mid. Yellow: Extended Mid.
White: Extended Max. White: Extended Max.
Outriggers Mid.
stroke
Outriggers Mid. Min 2,180
680
Extended Min. Extended Min.
Mid 4,000
Extended Mid. Extended Max.
Extended Min. Extended Min. Max 5,700
Extended Max.
Extended Mid. Extended Mid.
Extended Max. Extended Max.
BOOM TRUCK
HYDRAULIC Introducing the TADANO TM-20110, the TADANO Straight Truck Mount is available in behind
Hydraulic motor For winch and swing the cab as well as rear mounts. TADANO has over 50 years of experience in manufacturing high
Control valves Multiple control valves with integral safety valve quality cranes featuring innovative ideas and leading edge technology. The TM-20110 answers
TM-20110
Hydraulic pump 3-section gear pump a real need for a true Boom Truck for all over the world. This is the crane that everyone has been
Winch system : (20.6Mpa)
looking for and we have delivered a crane packed with great features and superior performance.
121L/min@ 2,430rpm pump
With its long reach and high lift, we believe the TM-20110 is one of our most desirable cranes.
99.6L/min@ 2,000rpm pump
TADANO builds a vast range of cranes from 0.5 ton to 600 tons. No matter what your reach or lift
Boom and outriggers system : (21.1 MPa)
requirements are, TADANO can provide you with a great solution. Put one to work for you now. MAXIMUM LIFTING CAPACITY : 18TON
95 L/min@ 2,430rpm pump
Call today or visit our web site for more information.
78.2L/min@ 2,000rpm pump
Swing system : (12.1 MPa)
Features:
25 L/min@ 2,430rpm pump
20.6L/min@ 2,000rpm pump Exceptional Reach without a Jib: 33.5 m. Full Power Boom
Reserve tank 295 L capacity Self-Aligning Pentagonal Shaped Boom: reducing maintenance cost
*PTO/Mounting note included Light Weight: increases payload
ELECTRICAL SYSTEM
Out & Down Mainframe Outriggers: complete level ability
Power supply DC12V with a converter (Step down converter from 24V)
SAFETY DEVICES Multiple Outrigger Span: easy to set up in various job sites
Pendant type over-winding cut out Faster Function Speeds: increase productivity
Hook safety latch Superior Winch Performance: up to 85 m/min increase productivity
Level gauge
Hydraulic safety valves, check valves and holding valves
Shear Plate Mounting: more secure “no creep mount”
Over load shutoff with load indicator (TADANO’s exlusive “AMA” system) Large Hydraulic Reservoir: superior cooling capabilities
Load / Boom angle indication Operator Friendly: dual control stations with exceptional job site viewing
Audible warning Complete Load Monitoring: TADANO’s exclusive “AMA” system
External warning lamps
BOOM REST
Removable
TORSION BOX
<CAB BACK MOUNTED>
The weight of 22ft (6.7m) standard torsion box is approx. 1,800kg.
<REAR MOUNTED>
The weight of 14ft (3.6m) torsion box is approx. 1,400kg.
CRANE WEIGHT
Approx. 6,900 kg (bare), approx. 8,400kg (include all items; crane, tank, oil, rear stabilizer, boom rest, etc.)
OPTION
Hook block
Swivel hook with safety latch
1) 3,200kg capacity ( for single line use, 60kg)
Highest Quality Boom Trucks on the Planet
2) 6,000kg capacity ( for two part lines use, 100kg)
3) 12,000kg capacity ( for four part lines line use, 160kg)
4) 18,000kg capacity ( for six part lines use, 220.5kg)
*Note
A crane does not come with a hook block as a standard item
and shall be ordered out from the above.
The above lifting heights and boom angles are based on a straight (unladen)boom,
SWING and allowance should be made for boom deflection obtained under laden condition.
No. of part lines
Max. of load
1
3,200kg
2
6,000kg
4
12,000kg
6
18,000kg
Hydraulic motor driven, Planetary gear speed reduction <REAR MOUNTED> (mm) Gross Axle Weight Rating(GAWR), front approx. 6,350kg
Continuous 360˚ full circle swing (Standard) Gross Axle Weight Rating(GAWR), rear approx. 15,400kg
Gross Vehicle Weight Rating approx. 21,750kg
Swing speed 360˚ / 37s @ 2,430rpm pump or 45s @ 2,000rpm pump RATED LIFTING CAPACITY (IN KILOGRAMS) SAE85% / ISO4305
5,590 to 6,350mm
Wheelbase(WB)
Non-Continuous 375˚ rotation on ball bearing slew ring (Option) 8.3m Boom 14m Boom 18.9m Boom 23.8m Boom 28.6m Boom 33.5m Boom Cab to axle(CA) 3,810 to 4,570mm
Swing speed 375˚ / 38s @ 2,430rpm pump or 47s @ 2,000rpm pump Stability weight, front * 3,600kg Min.
Load Load Stability weight, rear * 3,600kg Min.
OUTRIGGERS radius radius
Frame Section Module(SM) under crane, 328 cm3 Min. per rail
<CAB BACK MOUNTED> (m) Loaded Outriggers Loaded Outriggers Loaded Outriggers Loaded Outriggers Loaded Outriggers Loaded Outriggers (m)
110,000PSI steel
Boom Extended Boom Extended Boom Extended Boom Extended Boom Extended Boom Extended
Outriggers (Out & Down type) Angle Max. Mid. Min. Angle Max. Mid. Min. Angle Max. Mid. Angle Max. Mid. Angle Max. Angle Max. Frame Section Module(SM) 328 cm3 Min. per rail
Hydraulically extended sliders and hydraulically extended jacks, integral with crane frame 1.5 79˚ 18,000 12,700 9,000 1.5 over rear outriggers, 110,000PSI steel
73˚ 6,500 PTO torque approx. 390 N-m Min.
Extend width Min. 2,180mm 2.5
3.0 68˚
11,300 11,300
9,900 9,900 4,700 78˚ 7,200 7,200 4,300
2.5
3.0 PTO revolution approx. 550 to 2,400 rpm
5,590 to 6,350
Mid. 4,000mm 3.5 64˚ 8,800 8,800 3,500 76˚ 7,200 7,200 3,400 3.5 *3,600kg MIN *3,600kg MIN Width for crane mounting approx. 1,400mm Min.
Max.5,700mm 4.0 60˚ 7,900 7,800 2,750 73˚ 7,200 7,200 2,700 4.0 Frame width(outside) approx. 915mm Max.
5.0 51˚ 6,400 5,400 1,800 69˚ 6,200 5,400 1,850 75˚ 5,700 5,200 5.0 Frame height(ground to frame top) approx. 1,060mm Max.
Rear stabilizers (Out & Down type) 6.0 41˚ 5,200 3,750 1,200 65˚ 5,100 3,800 1,300 73˚ 4,700 3,600 77˚ 4,300 3,800 6.0 This mount requires front outriggers, torsion resisting box and
additional counterweight in the underside of the bed for full * Estimated axle scale weights prior to installation of crane, stabilisers and torsion box for 78%
Hydraulically extended sliders and hydraulically extended jacks, integral with chassis frame 8.0 55˚
44˚
3,700 2,200 650
300
66˚
59˚
3,300 2,250
1,500
72˚
67˚
3,200 2,250
2,400 1,500
77˚
72˚
2,400
75˚
8.0
capacity 360˚ around the truck. stabilitiy. Include counterweight.
10.0 2,600 1,450 2,500 2,300 1,700 10.0
Extend width Min. 2,250mm 12.0 29˚ 1,800 900 51˚ 2,000 1,000 61˚ 2,000 1,050 67˚ 1,900 71˚ 1,500 12.0
You must select a torsion box according to the length of the flatbed and
have it installed. The weight of standard torsion box for 14' flat bed:
Max.3,500mm 14.0 44˚ 1,500 650 56˚ 1,600 700 64˚ 1,600 69˚ 1,300 14.0
approx. 1,406kg.
16.0 32˚ 1,100 400 50˚ 1,250 450 58˚ 1,300 65˚ 1,100 16.0
Single front stabilizer 18.0 10˚ 750 41˚ 950 250 52˚ 1,000 60˚ 900 18.0
The complete unit must be istalled in accordance with factory
requirements and a test performed to determine actual stability and
Hydraulic extended jack in front of bumper for 360˚ lifting operations 20.0 35˚ 700 48˚ 750 56˚ 750 20.0 counterweight
22.0 21˚ 500 42˚ 550 52˚ 600 22.0 requirements for variety of trucks.
24.0 35˚ 400 47˚ 400 24.0 REAR MOUNTED configulation can not convert to CAB BACK
<REAR MOUNTED> 26.0 42˚ 250 26.0 MOUNTED configuration.
2,900 2,100 550 1,000 650 250
Rear outriggers (Out & Down type) 0˚
(7.88m)
0˚
(13.57m)
0˚
(18.44m)
Hydraulically extended sliders and hydraulically extended jacks, integral with crane frame Notice : The chart is only for reference and should not be used for operation.
Maintain a clearances at least 3m between any part of the crane, load line or load and any electrical line carrying up to 50,000 volts.
Extend width Min. 2,180mm 0.3m additional clearance is required for every additional 30,000 volts or less.
Mid. 4,000mm
Max.5,700mm TM-20110 (18 ton) crane dimension specifications
(mm)
Front outriggers (Out & Down type) Min 8,330 Max33,530 2,428
Hydraulically extended sliders and hydraulically extended jacks, integral with chassis frame 450
Extend width Min. 2,180mm < CAB BACK MOUNTED > < REAR MOUNTED >
Mid. 4,000mm Extension Mark Extension Mark for Rear Mout
2,809
Outriggers Max. Outriggers Min.
Max.5,700mm Front Outriggers
Yellow: Extended Mid.
Rear Stabilizers Front Outriggers Rear Outriggers Outriggers Max. Outriggers Min.
White: Extended Max. White: Extended Max.
Yellow: Extended Mid. Yellow: Extended Mid.
White: Extended Max. White: Extended Max.
Outriggers Mid.
stroke
Outriggers Mid. Min 2,180
680
Extended Min. Extended Min.
Mid 4,000
Extended Mid. Extended Max.
Extended Min. Extended Min. Max 5,700
Extended Max.
Extended Mid. Extended Mid.
Extended Max. Extended Max.
TM-20110 (18 ton) crane specifications TM-20110 (18 ton) crane capacity TM-20110 (18 ton) crane configuration
The above lifting heights and boom angles are based on a straight (unladen)boom,
SWING and allowance should be made for boom deflection obtained under laden condition.
No. of part lines
Max. of load
1
3,200kg
2
6,000kg
4
12,000kg
6
18,000kg
Hydraulic motor driven, Planetary gear speed reduction <REAR MOUNTED> (mm) Gross Axle Weight Rating(GAWR), front approx. 6,350kg
Continuous 360˚ full circle swing (Standard) Gross Axle Weight Rating(GAWR), rear approx. 15,400kg
Gross Vehicle Weight Rating approx. 21,750kg
Swing speed 360˚ / 37s @ 2,430rpm pump or 45s @ 2,000rpm pump RATED LIFTING CAPACITY (IN KILOGRAMS) SAE85% / ISO4305
5,590 to 6,350mm
Wheelbase(WB)
Non-Continuous 375˚ rotation on ball bearing slew ring (Option) 8.3m Boom 14m Boom 18.9m Boom 23.8m Boom 28.6m Boom 33.5m Boom Cab to axle(CA) 3,810 to 4,570mm
Swing speed 375˚ / 38s @ 2,430rpm pump or 47s @ 2,000rpm pump Stability weight, front * 3,600kg Min.
Load Load Stability weight, rear * 3,600kg Min.
OUTRIGGERS radius radius
Frame Section Module(SM) under crane, 328 cm3 Min. per rail
<CAB BACK MOUNTED> (m) Loaded Outriggers Loaded Outriggers Loaded Outriggers Loaded Outriggers Loaded Outriggers Loaded Outriggers (m)
110,000PSI steel
Boom Extended Boom Extended Boom Extended Boom Extended Boom Extended Boom Extended
Outriggers (Out & Down type) Angle Max. Mid. Min. Angle Max. Mid. Min. Angle Max. Mid. Angle Max. Mid. Angle Max. Angle Max. Frame Section Module(SM) 328 cm3 Min. per rail
Hydraulically extended sliders and hydraulically extended jacks, integral with crane frame 1.5 79˚ 18,000 12,700 9,000 1.5 over rear outriggers, 110,000PSI steel
73˚ 6,500 PTO torque approx. 390 N-m Min.
Extend width Min. 2,180mm 2.5
3.0 68˚
11,300 11,300
9,900 9,900 4,700 78˚ 7,200 7,200 4,300
2.5
3.0 PTO revolution approx. 550 to 2,400 rpm
5,590 to 6,350
Mid. 4,000mm 3.5 64˚ 8,800 8,800 3,500 76˚ 7,200 7,200 3,400 3.5 *3,600kg MIN *3,600kg MIN Width for crane mounting approx. 1,400mm Min.
Max.5,700mm 4.0 60˚ 7,900 7,800 2,750 73˚ 7,200 7,200 2,700 4.0 Frame width(outside) approx. 915mm Max.
5.0 51˚ 6,400 5,400 1,800 69˚ 6,200 5,400 1,850 75˚ 5,700 5,200 5.0 Frame height(ground to frame top) approx. 1,060mm Max.
Rear stabilizers (Out & Down type) 6.0 41˚ 5,200 3,750 1,200 65˚ 5,100 3,800 1,300 73˚ 4,700 3,600 77˚ 4,300 3,800 6.0 This mount requires front outriggers, torsion resisting box and
additional counterweight in the underside of the bed for full * Estimated axle scale weights prior to installation of crane, stabilisers and torsion box for 78%
Hydraulically extended sliders and hydraulically extended jacks, integral with chassis frame 8.0 55˚
44˚
3,700 2,200 650
300
66˚
59˚
3,300 2,250
1,500
72˚
67˚
3,200 2,250
2,400 1,500
77˚
72˚
2,400
75˚
8.0
capacity 360˚ around the truck. stabilitiy. Include counterweight.
10.0 2,600 1,450 2,500 2,300 1,700 10.0
Extend width Min. 2,250mm 12.0 29˚ 1,800 900 51˚ 2,000 1,000 61˚ 2,000 1,050 67˚ 1,900 71˚ 1,500 12.0
You must select a torsion box according to the length of the flatbed and
have it installed. The weight of standard torsion box for 14' flat bed:
Max.3,500mm 14.0 44˚ 1,500 650 56˚ 1,600 700 64˚ 1,600 69˚ 1,300 14.0
approx. 1,406kg.
16.0 32˚ 1,100 400 50˚ 1,250 450 58˚ 1,300 65˚ 1,100 16.0
Single front stabilizer 18.0 10˚ 750 41˚ 950 250 52˚ 1,000 60˚ 900 18.0
The complete unit must be istalled in accordance with factory
requirements and a test performed to determine actual stability and
Hydraulic extended jack in front of bumper for 360˚ lifting operations 20.0 35˚ 700 48˚ 750 56˚ 750 20.0 counterweight
22.0 21˚ 500 42˚ 550 52˚ 600 22.0 requirements for variety of trucks.
24.0 35˚ 400 47˚ 400 24.0 REAR MOUNTED configulation can not convert to CAB BACK
<REAR MOUNTED> 26.0 42˚ 250 26.0 MOUNTED configuration.
2,900 2,100 550 1,000 650 250
Rear outriggers (Out & Down type) 0˚
(7.88m)
0˚
(13.57m)
0˚
(18.44m)
Hydraulically extended sliders and hydraulically extended jacks, integral with crane frame Notice : The chart is only for reference and should not be used for operation.
Maintain a clearances at least 3m between any part of the crane, load line or load and any electrical line carrying up to 50,000 volts.
Extend width Min. 2,180mm 0.3m additional clearance is required for every additional 30,000 volts or less.
Mid. 4,000mm
Max.5,700mm TM-20110 (18 ton) crane dimension specifications
(mm)
Front outriggers (Out & Down type) Min 8,330 Max33,530 2,428
Hydraulically extended sliders and hydraulically extended jacks, integral with chassis frame 450
Extend width Min. 2,180mm < CAB BACK MOUNTED > < REAR MOUNTED >
Mid. 4,000mm Extension Mark Extension Mark for Rear Mout
2,809
Outriggers Max. Outriggers Min.
Max.5,700mm Front Outriggers
Yellow: Extended Mid.
Rear Stabilizers Front Outriggers Rear Outriggers Outriggers Max. Outriggers Min.
White: Extended Max. White: Extended Max.
Yellow: Extended Mid. Yellow: Extended Mid.
White: Extended Max. White: Extended Max.
Outriggers Mid.
stroke
Outriggers Mid. Min 2,180
680
Extended Min. Extended Min.
Mid 4,000
Extended Mid. Extended Max.
Extended Min. Extended Min. Max 5,700
Extended Max.
Extended Mid. Extended Mid.
Extended Max. Extended Max.
BOOM TRUCK
HYDRAULIC Introducing the TADANO TM-20110, the TADANO Straight Truck Mount is available in behind
Hydraulic motor For winch and swing the cab as well as rear mounts. TADANO has over 50 years of experience in manufacturing high
Control valves Multiple control valves with integral safety valve quality cranes featuring innovative ideas and leading edge technology. The TM-20110 answers
TM-20110
Hydraulic pump 3-section gear pump a real need for a true Boom Truck for all over the world. This is the crane that everyone has been
Winch system : (20.6Mpa)
looking for and we have delivered a crane packed with great features and superior performance.
121L/min@ 2,430rpm pump
With its long reach and high lift, we believe the TM-20110 is one of our most desirable cranes.
99.6L/min@ 2,000rpm pump
TADANO builds a vast range of cranes from 0.5 ton to 600 tons. No matter what your reach or lift
Boom and outriggers system : (21.1 MPa)
requirements are, TADANO can provide you with a great solution. Put one to work for you now. MAXIMUM LIFTING CAPACITY : 18TON
95 L/min@ 2,430rpm pump
Call today or visit our web site for more information.
78.2L/min@ 2,000rpm pump
Swing system : (12.1 MPa)
Features:
25 L/min@ 2,430rpm pump
20.6L/min@ 2,000rpm pump Exceptional Reach without a Jib: 33.5 m. Full Power Boom
Reserve tank 295 L capacity Self-Aligning Pentagonal Shaped Boom: reducing maintenance cost
*PTO/Mounting note included Light Weight: increases payload
ELECTRICAL SYSTEM
Out & Down Mainframe Outriggers: complete level ability
Power supply DC12V with a converter (Step down converter from 24V)
SAFETY DEVICES Multiple Outrigger Span: easy to set up in various job sites
Pendant type over-winding cut out Faster Function Speeds: increase productivity
Hook safety latch Superior Winch Performance: up to 85 m/min increase productivity
Level gauge
Hydraulic safety valves, check valves and holding valves
Shear Plate Mounting: more secure “no creep mount”
Over load shutoff with load indicator (TADANO’s exlusive “AMA” system) Large Hydraulic Reservoir: superior cooling capabilities
Load / Boom angle indication Operator Friendly: dual control stations with exceptional job site viewing
Audible warning Complete Load Monitoring: TADANO’s exclusive “AMA” system
External warning lamps
BOOM REST
Removable
TORSION BOX
<CAB BACK MOUNTED>
The weight of 22ft (6.7m) standard torsion box is approx. 1,800kg.
<REAR MOUNTED>
The weight of 14ft (3.6m) torsion box is approx. 1,400kg.
CRANE WEIGHT
Approx. 6,900 kg (bare), approx. 8,400kg (include all items; crane, tank, oil, rear stabilizer, boom rest, etc.)
OPTION
Hook block
Swivel hook with safety latch
1) 3,200kg capacity ( for single line use, 60kg)
Highest Quality Boom Trucks on the Planet
2) 6,000kg capacity ( for two part lines use, 100kg)
3) 12,000kg capacity ( for four part lines line use, 160kg)
4) 18,000kg capacity ( for six part lines use, 220.5kg)
*Note
A crane does not come with a hook block as a standard item
and shall be ordered out from the above.